ASTM D 3699 : 2013-05
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
SPECIFICATION FOR KEROSINE
Superseded date
28-01-2020
Published date
01-05-2013
Sorry this product is not available in your region.
CONTAINED IN VOL. 05.02, 2015 Defines two grades of kerosine suitable for use in critical kerosine burner applications: 1) No. 1-K - A special low-sulfur grade kerosine suitable for use in nonflue-connected kerosine burner appliances and for use in wick-fed illuminating lamps; & 2) No. 2-K - A regular grade kerosine suitable for use in flue-connected burner appliances and for use in wick-fed illuminating lamps.
| Committee |
D 02
|
| DocumentType |
Redline
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| ASTM C 474 : 2015 : REDLINE | Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction |
| ASTM D 4868 : 2017 : REDLINE | Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels |
| MIL-G-51491 Revision A:1986 | GENERATOR, SMOKE, MECHANICAL PULSE JET, M3A4 |
| MIL-STD-271 Revision F:1986 | REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS |
| ASTM D 4866 : 1988 : R2003 : EDT 1 | Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures |
| ASTM D 7451 : 2016 : REDLINE | Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels |
| ASTM D 4865 : 2009 : R2014 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
| ASTM D 6258 : 2017 : REDLINE | Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels |
| ASTM D 2709 : 2016 : REDLINE | Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge |
| ASTM D 7687 : 2017 : REDLINE | Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration |
| ASTM D 6217 : 2011 | Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration |
| NFPA 31 : 2016 | INSTALLATION OF OIL-BURNING EQUIPMENT |
| ASTM D 7058 : 2004 : R2014 | Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer |
| ASTM D 187 : 2008 : R2013 | Standard Test Method for Burning Quality of Kerosine |
| ASTM D 4865 : 2009 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
| ASTM D 8166 : 2017 | Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters |
| ASTM D 7058:2004 | Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer |
| ASTM D 4866 : 1988 : R1997 : EDT 1 | Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures |
| ASTM D 7464 : 2014 : REDLINE | Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing |
| ASTM D 6756 : 2017 : REDLINE | Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer |
| ASTM D 6468 : 2008 : R2013 | Standard Test Method for High Temperature Stability of Middle Distillate Fuels |
| NFPA 1 : 2021 | FIRE CODE |
| UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
| ASTM D 3320 : 2000 : R2004 : EDT 1 | Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type) (Withdrawn 2013) |
| ASTM D 6136 : 1997 | Standard Test Method for Kerosene Number of Unsaturated (Dry) Felt by the Vacuum Method |
| MIL-PRF-6864 Revision F:2010 | CLEANING COMPOUND, SOLVENT, OIL COOLER |
| MIL-STD-3004 Revision D:2014 | QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS |
| MIL-G-0051066 Revision D:1982 | GENERATOR, SMOKE, MECHANICAL PULSE JET, M3A3 |
| ASTM D 7619 : 2017 : REDLINE | Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter |
| ASTM D 6136/D6136M : 2015 : REDLINE | Standard Test Method for Kerosine Number of Unsaturated (Dry) Felt by Vacuum Method |
| API MPM CH10.4 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.4: DETERMINATION OF WATER AND/OR SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (FIELD PROCEDURE) |
| ASTM D 187 : 2008 | Standard Test Method for Burning Quality of Kerosine |
| ASTM D 4866/D4866M : 1988 : R2011 : EDT 1 | Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures |
| ASTM D 2939 : 2003 | Standard Test Methods for Emulsified Bitumens Used as Protective Coatings (Withdrawn 2012) |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| MIL-PRF-11090 Revision K:2016 | CLEANING COMPOUND, DEGREASING AND DEPRESERVING SOLVENT |
| SAE J1297_201710 | Alternative Automotive Fuels |
| ASTM D 7058 : 2004 : R2009 | Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer |
| ASTM D 6469 : 2017 : REDLINE | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
| ASTM D 4866/D4866M : 1988 : R2017 | Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures |
| MIL-STD-457 Revision B:1989 | FREQUENCY FOR INSPECTION AND CLEANING OF PETROLEUM FUEL OPERATING AND STORAGE TANKS |
| ASTM D 6468 : 2008 | Standard Test Method for High Temperature Stability of Middle Distillate Fuels |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| F-F-351 Revision F:1999 | Filters and Filter Elements, Fluid Pressure: Lubricating Oil, Bypass and Full Flow |
| MIL-D-16791 Revision G:1990 | DETERGENT, GENERAL PURPOSE (LIQUID, NONIONIC) |
| ASTM D 3320 : 2000 | Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type) |
| SAE AIR786B | Elastomer Compatibility Considerations Relative to Elastomeric Sealant Selection |
| ASTM D 6217 : 2011 : R2016 | Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration |
| NFPA 1 : 2018 | FIRE CODE |
| NAVSEA T9074 AS GIB 010/271 : 0 | REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS |
| ASTM D 3227 : 2016 : REDLINE | Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) |
| ASTM D 5901 : 2003 | Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method) (Withdrawn 2010) |
| ASTM D 156 : 2015 : REDLINE | Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) |
| ASTM D 86 : 2017-06 | TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE |
| ASTM D 2386 : 2015 | Standard Test Method for Freezing Point of Aviation Fuels |
| ASTM D 6469 : 2017 : REDLINE | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
| ASTM D 2622 : 2016 : REDLINE | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.