ASTM D 3740 : 2012-06
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PRACTICE FOR MINIMUM REQUIREMENTS FOR AGENCIES ENGAGED IN TESTING AND/OR INSPECTION OF SOIL AND ROCK AS USED IN ENGINEERING DESIGN AND CONSTRUCTION
Superseded date
25-04-2020
Superseded by
Published date
01-06-2012
Sorry this product is not available in your region.
CONTAINED IN VOL. 04.08, 2017 Defines minimum qualifications for agencies engaged in the testing and inspection of soil and rock.
| Committee |
D 18
|
| DocumentType |
Redline
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
| ASTM D 2901 : 1999 | Standard Test Method for Cement Content of Freshly Mixed Soil-Cement (Withdrawn 2006) |
| ASTM D 4016 : 2014 : REDLINE | Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer (Laboratory Method) |
| ASTM D 7764 : 2012 | Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers |
| ASTM D 6459 : 2015 : REDLINE | Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion |
| ASTM D 8169/D8169M : 2018 | Standard Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load |
| ASTM E 2787 : 2011 | Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 7759/D7759M : 2014 : REDLINE | Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration |
| ASTM D 7243 : 2011 : REDLINE | Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges |
| FC 1-300-09N : Change 3 | FACILITIES CRITERIA - NAVY AND MARINE CORPS DESIGN PROCEDURES |
| ASTM D 6598 : 2011 : REDLINE | Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations |
| ASTM D 1143/D1143M : 2007 : R2013 | Standard Test Methods for Deep Foundations Under Static Axial Compressive Load |
| ASTM D 6635 : 2015 : REDLINE | Standard Test Method for Performing the Flat Plate Dilatometer |
| ASTM D 7128 : 2005 : R2010 | Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation |
| ASTM D 7743 : 2012 | Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders |
| ASTM D 4406 : 2004 | Standard Test Method for Creep of Cylindrical Rock Core Specimens in Triaxial Compression (Withdrawn 2005) |
| ASTM D 5080 : 2017 : REDLINE | Standard Test Method for Rapid Determination of Percent Compaction |
| ASTM E 2838 : 2011 | Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 7928 : 2017 : REDLINE | Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis |
| ASTM D 6572 : 2014-02 | TEST METHODS FOR DETERMINING DISPERSIVE CHARACTERISTICS OF CLAYEY SOILS BY THE CRUMB TEST |
| ASTM D 6168 : 1997 : EDT 1 | Standard Guide for Selection of the Minimum Set of Data Elements Required to Identify Locations Chosen for the Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids |
| ASTM E 2838 : 2011 : R2016 | Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 698 : 2013-05 | TEST METHODS FOR LABORATORY COMPACTION CHARACTERISTICS OF SOIL USING STANDARD EFFORT (12400 FT-LBF/FT[3] (600 KN-M/M[3])) |
| ASTM D 4253 : 2016 : REDLINE | Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
| ASTM D 6393 : 2014 : REDLINE | Standard Test Method for Bulk Solids Characterization by Carr Indices |
| ASTM D 6276 : 1999 : REV A | Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization |
| ASTM D 3966/D3966M : 2007 : R2013 : EDT 1 | Standard Test Methods for Deep Foundations Under Lateral Load |
| ASTM D 2435/D2435M : 2011 : REDLINE | Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading |
| ASTM D 854 : 2014 : REDLINE | Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023) |
| ASTM D 8037/D8037M : 2016 | Standard Practice for Direct Push Hydraulic Logging for Profiling Variations of Permeability in Soils |
| ASTM D 8107 : 2018 : REDLINE | Standard Practice for Determining Sediment Pond Skimmer Flow Rate |
| ASTM D 3385 : 2009-03 | TEST METHOD FOR INFILTRATION RATE OF SOILS IN FIELD USING DOUBLE-RING INFILTROMETER |
| ASTM D 7263 : 2009 : R2018 : EDT 1 | Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens |
| ASTM D 6724/D6724M : 2016 : REDLINE | Standard Guide for Installation of Direct Push Groundwater Monitoring Wells |
| ASTM D 5731 : 2016 : REDLINE | Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications |
| ASTM D 2974 : 2014 : REDLINE | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 2944 : 2014 : REDLINE | Standard Practice of Sampling Processed Peat Materials |
| ASTM D 1556/D1556M : 2015-03 | TEST METHOD FOR DENSITY AND UNIT WEIGHT OF SOIL IN PLACE BY SAND-CONE METHOD |
| ASTM D 6527 : 2000 | Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation |
| ASTM D 7891 : 2015 | Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell |
| ASTM D 7664 : 2010 | Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils |
| ASTM D 7698 : 2011 : REV A : REDLINE | Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method |
| ASTM D 2977 : 2014 | Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes |
| ASTM D 4531 : 2015 : REDLINE | Standard Test Methods for Bulk and Dry Density of Peat and Peat Products |
| ASTM D 5434 : 2012 | Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock (Withdrawn 2021) |
| ASTM D 2937 : 2017-03 | TEST METHOD FOR DENSITY OF SOIL IN PLACE BY THE DRIVE-CYLINDER METHOD |
| ASTM D 4612 : 2016 : REDLINE | Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil |
| ASTM D 1140 : 2017 : REDLINE | Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing |
| ASTM D 4718/D4718M : 2015 : REDLINE | Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
| ASTM D 425 : 2017 : REDLINE | Standard Test Method for Centrifuge Moisture Equivalent of Soils |
| ASTM D 5978/D5978M : 2016 : REDLINE | Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells |
| ASTM D 6103 : 2004 | Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM) (Withdrawn 2013) |
| ASTM D 1557 : 2012 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 7263 : 2009 | Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens |
| ASTM D 4394 : 2017 : REDLINE | Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method |
| ASTM D 3550/D3550M : 2017 | Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils |
| ASTM D 4914/D4914M : 2016 : REDLINE | Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit |
| ASTM D 1633 : 2017 | Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders |
| ASTM D 5270 : 1996 : R2014 | Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers |
| ASTM D 7046 : 2011 : REDLINE | Standard Guide for Use of the Metal Detection Method for Subsurface Exploration |
| ASTM D 6914 : 2004 : EDT 1 | Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices |
| ASTM D 7242/D7242M : 2006 : R2013 : EDT 1 | Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers (Withdrawn 2022) |
| ASTM D 4945 : 2017 : REDLINE | Standard Test Method for High-Strain Dynamic Testing of Deep Foundations |
| ASTM D 6276 : 1999 : REV A : R2006 | Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization |
| ASTM D 4320 : 2004 | Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Design Strength Parameters |
| ASTM D 4254 : 2016 : REDLINE | Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density |
| ASTM D 7277 : 2016 : REDLINE | Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow |
| ASTM D 6028 : 2017 : REDLINE | Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method |
| ASTM D 5269 : 2015 : REDLINE | Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method |
| BS EN ISO 19901-8:2015 | Petroleum and natural gas industries. Specific requirements for offshore structures Marine soil investigations |
| ASTM D 5522 : 1999 : REV A | Standard Specification for Minimum Requirements for Laboratories Engaged in Chemical Analysis of Soil, Rock, and Contained Fluid (Withdrawn 2004) |
| ASTM D 5850 : 2018 : REDLINE | Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells |
| ASTM D 4104 : 2017 : REDLINE | Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests) |
| ASTM D 5270 : 1996 | Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers |
| ASTM D 6913 : 2004 : R2009 : EDT 1 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 6243/D6243M : 2016 : REDLINE | Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method |
| ASTM D 4644 : 2016 : REDLINE | Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks |
| ASTM D 5911/D5911M : 1996 : R2010 : EDT 1 | Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site (Withdrawn 2019) |
| ASTM D 560/D560M : 2016 : REDLINE | Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures |
| ASTM D 5982 : 2015 : REDLINE | Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method) (Withdrawn 2024) |
| ASTM D 5255 : 2015 : REDLINE | Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock |
| ASTM D 6913 : 2004 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM E 2866 : 2012 | Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyzed by Liquid |
| ASTM D 4700 : 2015 : REDLINE | Standard Guide for Soil Sampling from the Vadose Zone |
| ASTM D 7401 : 2008 | Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests (Withdrawn 2017) |
| ASTM D 3551 : 2017 | Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer |
| ASTM D 5195 : 2014 : REDLINE | Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods |
| ASTM D 5334 : 2014 : REDLINE | Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure |
| ASTM D 1143/D1143M : 2007 | Standard Test Methods for Deep Foundations Under Static Axial Compressive Load |
| ASTM D 4623 : 2016 : REDLINE | Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge |
| ASTM D 4373 : 2014 : REDLINE | Standard Test Method for Rapid Determination of Carbonate Content of Soils |
| ASTM D 4427 : 2018 : REDLINE | Standard Classification of Peat Samples by Laboratory Testing |
| ASTM D 7181 : 2011 | Method for Consolidated Drained Triaxial Compression Test for Soils |
| AASHTO TP 100 : 2012 : R2015 | METHOD OF TEST FOR DEEP FOUNDATION ELEMENTS UNDER BIDIRECTIONAL STATIC AXIAL COMPRESSIVE LOAD |
| ASTM D 5313 : 2004 | Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions |
| ASTM D 4971 : 2016 : REDLINE | Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack |
| ASTM D 7299 : 2012 : REDLINE | Standard Practice for Verifying Performance of a Vertical Inclinometer Probe |
| ASTM D 4648/D4648M : 2016 : REDLINE | Standard Test Methods for Laboratory Miniature Vane Shear Test for Saturated<brk/>Fine-Grained Clayey Soil |
| ASTM D 4944 : 2018 : REDLINE | Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester |
| ASTM D 2166/D2166M : 2016 : REDLINE | Standard Test Method for Unconfined Compressive Strength of Cohesive Soil |
| ASTM D 1241 : 2015 : REDLINE | Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses |
| ASTM D 5920 : 2014 | Standard Test Method [Analytical Procedure] for Tests of Anisotropic Unconfined Aquifers by Neuman Method |
| ASTM D 5126 : 2016 : EDT 1 | Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone |
| ASTM D 4404 : 2018 : REDLINE | Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry |
| ASTM D 1883 : 2016 : REDLINE | Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils |
| ASTM D 5143 : 2006 | Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography |
| ASTM D 5716/D5716M : 2015 | Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir |
| ASTM D 1557 : 2012 : EDT 1 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM E 2787 : 2011 : R2016 | Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 5298 : 2016 : REDLINE | Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper |
| ASTM D 7380 : 2015 : REDLINE | Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer |
| ASTM D 6128 : 2016 : REDLINE | Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester |
| ASTM D 5472/D5472M : 2014 | Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well |
| ASTM D 6034 : 2017 : REDLINE | Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test |
| ASTM D 6169/D6169M : 2013 : REDLINE | Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations |
| ASTM D 6027/D6027M : 2015 | Standard Practice for Calibrating Linear Displacement Transducers for Geotechnical Purposes |
| ASTM D 6519 : 2015 : REDLINE | Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler |
| ASTM D 427 : 2004 | Test Method for Shrinkage Factors of Soils by the Mercury Method (Withdrawn 2008) |
| ASTM D 7481 : 2018 | Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder |
| ASTM D 6938 : 2017-03 | TEST METHOD FOR IN-PLACE DENSITY AND WATER CONTENT OF SOIL AND SOIL-AGGREGATE BY NUCLEAR METHODS (SHALLOW DEPTH) |
| ASTM D 6725/D6725M : 2016 : REDLINE | Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers |
| ASTM D 7458 : 2014 : REDLINE | Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection |
| ASTM D 7503 : 2018 : REDLINE | Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils |
| ASTM D 5220 : 2014 : REDLINE | Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method |
| ASTM D 5268 : 2013 : REDLINE | Standard Specification for Topsoil Used for Landscaping Purposes |
| ASTM D 6168 : 1997 : R2010 | Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids (Withdrawn 2019) |
| AASHTO TP 104 : 2013(R2015) | METHOD OF TEST FOR RAPID AXIAL COMPRESSIVE LOAD TESTING OF DEEP FOUNDATION UNITS |
| ASTM D 6634/D6634M : 2014 : REDLINE | Standard Guide for the Selection of Purging and Sampling Devices for Groundwater Monitoring Wells |
| ASTM D 4511 : 2011 : REDLINE | Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat |
| ASTM D 5312/D5312M : 2012 | Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions |
| ASTM D 7760 : 2018 : REDLINE | Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter |
| ASTM D 1997 : 2013 : REDLINE | Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass |
| ASTM E 2866 : 2012 : R2016 | Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry |
| ASTM D 7625 : 2010 | Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method (Withdrawn 2019) |
| ASTM D 4428/D4428M : 2014 : REDLINE | Standard Test Methods for Crosshole Seismic Testing |
| ASTM D 2973 : 2016 : REDLINE | Standard Test Method for Total Nitrogen in Peat Materials |
| ASTM D 5321/D5321M : 2017 : REDLINE | TEST METHOD FOR DETERMINING THE SHEAR STRENGTH OF SOIL-GEOSYNTHETIC AND GEOSYNTHETIC-GEOSYNTHETIC INTERFACES BY DIRECT SHEAR |
| ASTM D 4341 : 2003 | Standard Test Method for Creep of Cylindrical Hard Rock Core Specimens in Uniaxial Compression (Withdrawn 2005) |
| ASTM D 6432 : 2011 : REDLINE | Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation |
| ASTM D 4611 : 2016 : REDLINE | Standard Test Method for Specific Heat of Rock and Soil |
| ASTM D 5873 : 2014 : REDLINE | Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method |
| UFC 3-220-01 : 2012 | UNIFIED FACILITIES CRITERIA - GEOTECHNICAL ENGINEERING |
| ASTM D 5270 : 1996 : R2002 | Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers |
| ASTM D 3155 : 2011 : REDLINE | Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures |
| ASTM D 1632 : 2017 | Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory |
| ASTM D 6913/D6913M : 2017 : REDLINE | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 7242 : 2006 | Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers |
| ASTM D 2850 : 2015 : REDLINE | Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils |
| ASTM D 5855/D5855M : 2015 : REDLINE | Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well |
| ASTM D 6276 : 1999 : REV A : R2006 : EDT 1 | Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization (Withdrawn 2015) |
| ASTM D 7013 : 2004 | Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration Facility Setup |
| ASTM D 3282 : 2015 : REDLINE | Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes |
| AASHTO TP 100 : 2012 | METHOD OF TEST FOR DEEP FOUNDATION ELEMENTS UNDER BIDIRECTIONAL STATIC AXIAL COMPRESSIVE LOAD |
| ASTM D 2487 : 2017 : REDLINE | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM D 558 : 2011 : REDLINE | Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures |
| ASTM D 4221 : 2018 : REDLINE | Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer |
| ASTM D 7929 : 2014 | Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells |
| ASTM D 559/D559M : 2015 | Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures |
| ASTM D 6773 : 2016 : REDLINE | Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester |
| ASTM D 4554 : 2012 : REDLINE | Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities |
| ASTM D 5785/D5785M : 2015 : REDLINE | Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test) |
| ASTM D 6836 : 2016 : REDLINE | Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge |
| ASTM D 1587 : 2008 : R2012 : EDT 1 | Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes |
| ASTM D 5607 : 2016 : REDLINE | Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force |
| ASTM D 4633 : 2016 : REDLINE | Standard Test Method for Energy Measurement for Dynamic Penetrometers |
| ASTM D 6066 : 2011 : REDLINE | Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential |
| ASTM D 7100 : 2011 : REDLINE | Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions |
| ASTM D 4403 : 2012 | Standard Practice for Extensometers Used in Rock |
| ASTM D 6913 : 2004 : R2009 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 6230 : 2013 : REDLINE | Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers |
| ASTM D 7608 : 2010 | Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces |
| ASTM D 5092/D5092M : 2016 : REDLINE | Standard Practice for Design and Installation of Groundwater Monitoring Wells |
| ASTM D 6913 : 2004 : EDT 2 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 7560 : 2016 | Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs) |
| ASTM D 6282/D6282M : 2014 | Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations (Withdrawn 2023) |
| ASTM D 5143 : 2006 : R2015 : EDT 1 | Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography (Withdrawn 2023) |
| ASTM D 6391 : 2011 : REDLINE | Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration |
| ISO 19901-8:2014 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 8: Marine soil investigations |
| CSA ISO 19901-8 : 2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 8: MARINE SOIL INVESTIGATIONS |
| CSA ISO 19901-8:15 (R2020) | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 8: Marine soil investigations (Adopted ISO 19901-8:2014, first edition, 2014-12-01) |
| ASTM D 6473 : 2015 : REDLINE | Standard Test Method For Specific Gravity And Absorption of Rock For Erosion Control |
| ASTM D 806 : 2011 : REDLINE | Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures |
| ASTM D 6236 : 2011 : REDLINE | Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil |
| ASTM D 5786 : 2017 : REDLINE | Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems |
| ASTM D 2664 : 2004 | Standard Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements (Withdrawn 2005) |
| ASTM D 6032/D6032M : 2017 : REDLINE | Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core |
| ASTM D 5856 : 2015 : REDLINE | Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter |
| ASTM D 7481 : 2009 | Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder (Withdrawn 2018) |
| ASTM D 1587/D1587M : 2015 : REDLINE | Standard Practice for Thin-Walled Tube Sampling of Fine-Grained Soils for Geotechnical Purposes |
| ASTM D 4050 : 2014 : REDLINE | Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems |
| ASTM D 4643 : 2017 : REDLINE | Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating |
| ASTM D 7626 : 2010 | Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay |
| ASTM D 7830/D7830M : 2014 : REDLINE | Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge |
| ASTM D 7262 : 2010 : R2016 : EDT 1 | Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids |
| ASTM D 6539 : 2013 : REDLINE | Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air |
| ASTM D 5240 : 2004 | Standard Test Method for Testing Rock Slabs to Evaluate Soundness of Riprap by Use of Sodium Sulfate or Magnesium Sulfate |
| AASHTO TP 104:2013 | Standard Method of Test for Rapid Axial Compressive Load Testing of Deep Foundation Units |
| API RP 1170 : 2015 | DESIGN AND OPERATION OF SOLUTION-MINED SALT CAVERNS USED FOR NATURAL GAS STORAGE |
| ASTM D 5240/D5240M : 2013-05 | STANDARD TEST METHOD FOR EVALUATION OF DURABILITY OF ROCK FOR EROSION CONTROL USING SODIUM SULFATE OR MAGNESIUM SULFATE |
| ASTM D 5143 : 2006 : R2010 : EDT 1 | Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography |
| I.S. EN ISO 19901-8:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 8: MARINE SOIL INVESTIGATIONS (ISO 19901-8:2014) |
| ASTM D 7263 : 2009 : R2018 | Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens |
| ASTM D 4395 : 2017 : REDLINE | Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method |
| ASTM D 6168 : 1997 : R2004 | Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids |
| ASTM D 3080/D3080M : 2011 : REDLINE | Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions (Withdrawn 2020) |
| AASHTO R 13 : 2012 | PRACTICE FOR CONDUCTING GEOTECHNICAL SUBSURFACE INVESTIGATIONS |
| ASTM D 5311/D5311M : 2013 : REDLINE | Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil |
| ASTM D 6475 : 2017 | Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets |
| ASTM D 7300 : 2012-01 | TEST METHOD FOR LABORATORY DETERMINATION OF STRENGTH PROPERTIES OF FROZEN SOIL AT A CONSTANT RATE OF STRAIN |
| ASTM D 4223 : 1999 | Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils |
| ASTM D 1587 : 2008 | Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes |
| ASTM D 5335 : 2014 : REDLINE | Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges (Withdrawn 2023) |
| ASTM D 6527 : 2000 : R2008 | Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation (Withdrawn 2017) |
| ASTM D 6780/D6780M : 2012 : REDLINE | Standard Test Method for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR) |
| ASTM D 4542 : 2015 : REDLINE | Standard Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer |
| ASTM D 4106 : 2015 : REDLINE | Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method |
| ASTM D 6780 : 2005 | Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR) |
| ASTM D 3441 : 2016 | Standard Test Method for Mechanical Cone Penetration Testing of Soils |
| ASTM D 4223/D4223M : 2012 | Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils |
| ASTM D 1143/D1143M : 2007 : R2013 : EDT 1 | Standard Test Methods for Deep Foundations Under Static Axial Compressive Load |
| ASTM D 5299/D5299M : 2018 : REDLINE | Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities |
| ASTM D 3148 : 2002 | Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression (Withdrawn 2005) |
| ASTM D 4943 : 2008-07 | TEST METHOD FOR SHRINKAGE FACTORS OF SOILS BY THE WAX METHOD |
| EN ISO 19901-8:2015 | Petroleum and natural gas industries - Specific requirements for offshore structures - Part 8: Marine soil investigations (ISO 19901-8:2014) |
| ASTM D 4405 : 2004 | Standard Test Method for Creep of Cylindrical Soft Rock Core Specimens in Uniaxial Compressions (Withdrawn 2005) |
| ASTM D 6760 : 2016 : REDLINE | Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing |
| ASTM D 7013/D7013M : 2015 : REDLINE | Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges |
| ASTM D 5874 : 2016 : REDLINE | Standard Test Methods for Determination of the Impact Value (IV) of a Soil |
| ASTM D 2167 : 2015 : REDLINE | Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method |
| 13/30257183 DC : 0 | BS EN ISO 19901-8 - PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 8: MARINE SOIL INVESTIGATIONS |
| ASTM D 5202/D5202M : 2016 : REDLINE | Standard Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils |
| ASTM D 2435 : 2004 | Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading |
| ASTM D 4223 : 1999 : R2006 | Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils |
| ASTM D 4648 : 2005 | Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil |
| ASTM D 6035/D6035M : 2013 : REDLINE | Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter |
| ASTM D 560 : 2003 | Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures (Withdrawn 2012) |
| ASTM E 329 : 2018 : REDLINE | Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection |
| ASTM D 5779/D5779M : 2014 : REDLINE | Standard Test Method for Field Determination of Rapid Specific Gravity of Rock and Manmade Materials for Erosion Control (Withdrawn 2023) |
| ASTM D 1143/D1143M : 2007 : EDT 1 | Standard Test Methods for Deep Foundations Under Static Axial Compressive Load |
| ASTM D 6914/D6914M : 2016 : REDLINE | Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices |
| ASTM D 5882 : 2016 : REDLINE | Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations |
| ASTM D 5473/D5473M : 2015 | Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer |
| ASTM D 4767 : 2011 : REDLINE | Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils |
| ASTM D 6914 : 2004 : R2010 | Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices |
| ASTM D 6067/D6067M : 2017 : REDLINE | Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization and Estimation of Hydraulic Conductivity |
| ASTM D 8106 : 2017 | Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay |
| ASTM D 6024/D6024M : 2016 : REDLINE | Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application |
| ASTM D 7949 : 2014 | Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations (Withdrawn 2023) |
| ASTM D 3689/D3689M : 2007 : R2013 : EDT 1 | Standard Test Methods for Deep Foundations Under Static Axial Tensile Load |
| ASTM D 4452 : 2014 : REDLINE | Standard Practice for X-Ray Radiography of Soil Samples |
| ASTM D 5778 : 2012 : REDLINE | Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils |
| ASTM D 4381/D4381M : 2012 : REDLINE | Standard Test Method for Sand Content by Volume of Bentonitic Slurries (Withdrawn 2021) |
| ASTM D 4829 : 2011 : REDLINE | Standard Test Method for Expansion Index of Soils |
| ASTM D 5971/D5971M : 2016 : REDLINE | Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material |
| ASTM D 3967 : 2016 : REDLINE | Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens |
| ASTM D 6151/D6151M : 2015 : REDLINE | Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling |
| ASTM D 5270 : 1996 : R2008 | Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers |
| ASTM D 6758 : 2018 | Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method |
| ASTM D 7128 : 2005 | Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation |
| ASTM D 7262 : 2010 | Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids |
| ASTM D 5550 : 2014 : REDLINE | Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer |
| ASTM D 559 : 2003 | Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures (Withdrawn 2012) |
| ASTM D 7013 : 2004 : EDT 1 | Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration Facility Setup |
| ASTM D 5333 : 2003 | Standard Test Method for Measurement of Collapse Potential of Soils (Withdrawn 2012) |
| ASTM D 7758 : 2017 : REDLINE | Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations |
| ASTM D 6029 : 2017 : REDLINE | Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method |
| ASTM D 6913 : 2004 : EDT 1 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 5519 : 2015 : REDLINE | Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials |
| ASTM D 4959 : 2016 : REDLINE | Standard Test Method for Determination of Water Content of Soil By Direct Heating |
| ASTM D 3080 : 2004 | Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions |
| ASTM D 7070 : 2016 : REDLINE | Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature |
| ASTM D 1635/D1635M : 2012 | Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading |
| ASTM D 1634 : 2017 | Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method) |
| ASTM D 4044/D4044M : 2015 : REDLINE | Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers |
| ASTM D 6528 : 2017 | Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils |
| ASTM D 2976 : 2015 | Standard Test Method for pH of Peat Materials |
| ASTM D 6914 : 2004 | Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices |
| ASTM D 4380 : 2012 : REDLINE | Standard Test Method for Density of Bentonitic Slurries |
| ASTM D 4647/D4647M : 2013 : REDLINE | Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test |
| PIP CVS02100 : 2014 | SITE PREPARATION, EXCAVATION, AND BACKFILL SPECIFICATION |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ASTM D 5255 : 2015 : REDLINE | Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock |
| ASTM D 3666 : 2016 : REDLINE | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM E 1187 : 1997 | Standard Terminology Relating to Conformity Assessment (Withdrawn 2006) |
| ASTM C 1077 : 2017 : REDLINE | Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation |
| ASTM D 653 : 2014 : REDLINE | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.