ASTM D 3792 : 2016 : REDLINE
Current
The latest, up-to-date edition.
Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
English
01-06-2016
CONTAINED IN VOL. 06.01, 2018 Defines the determination of the total water content of waterborne paints.
Committee |
D 01
|
DocumentType |
Redline
|
Pages |
4
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
1.1This test method is for the determination of the total water content of waterborne paints. It has been evaluated for latex systems (styrene-butadiene, poly(vinylacetate)-acrylic, acrylic), epoxy acrylic resin systems and acrylic systems. The established working range of this test method is from 15 to 90 %. There is no reason to believe that it will not work outside of this range.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
SAE AMS 3116 A : 2005 | PRIMER COATING; EPOXY, CHEMICAL AND SOLVENT RESISTANT NON-CHROMATED, CORROSION PREVENTIVE |
SAE AMS 3146 : 2000 | COATING, INTERIOR AIRCRAFT CABIN LOW HEAT AND SMOKE RELEASE |
ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM D 5325 : 2003 : R2008 : EDT 1 | Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints |
ASTM D 3960 : 2005 | Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
ASTM D 3960 : 2005 : R2013 | Standard Practice for Determining Volatile Organic Compound (VOC)Content of Paints and Related Coatings |
ASTM D 5328 : 1992 : R1997 | Standard Test Method for Volatile Organic Compound (VOC40) Content of Non-Heatset Paste Printing Ink Systems at 40 °C (Withdrawn 2001) |
MIL-P-53032 Base Document:1983 | PRIMER COATING, WATER REDUCIBLE, EPOXY ESTER LATEX TYPE, LEAD AND CHROMATE FREE |
ASTM D 5325 : 2003 : R2014 | Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints |
ASTM D 5325 : 2003 | Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints |
TT-P-1511 Revision B:1981 | PAINT, LATEX (GLOSS & SEMIGLOSS, TINTS & WHITE) (FOR INTERIOR USE) |
ASTM D 7768 : 2012 | Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography |
ASTM D 3960 : 2005 : R2018 | Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
ASTM D 5324 : 2016 : REDLINE | Standard Guide for Testing Water-Borne Architectural Coatings |
ASTM D 6577 : 2015 : REDLINE | Standard Guide for Testing Industrial Protective Coatings |
ASTM D 7270 : 2007 | Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings |
ASTM D 7270 : 2007 : R2013 | Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings |
ASTM D 4143 : 2016 : REDLINE | Standard Guide for Testing Latex Vehicles |
ASTM E 180 : 2003 | Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals (Withdrawn 2009) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.