Skip to content
Please enter a keyword to search

  • ASTM D 7270 : 2007 : R2013

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings

    Available format(s):  Hardcopy, PDF

    Superseded date:  02-07-2021

    Language(s):  English

    Published date:  11-07-2013

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 06.02, 2018 Gives a generic testing procedure to verify the air pollution-prevention characteristics and basic properties of liquid coatings applied to metal, plastic, wood, or composite substrates in a factory/manufacturing environment.

    Scope - (Show below) - (Hide below)

    1.1This guide provides a generic testing procedure to verify the air pollution-prevention characteristics and basic properties of liquid coatings applied to metal, plastic, wood, or composite substrates in a factory/manufacturing environment. Thus it may be used to evaluate these liquid coatings to verify their volatile organic compound (VOC) and organic hazardous air pollutant (HAP) content as well as basic performance properties.

    1.2This guide is adapted from a procedure used by the US Environmental Protection Agency (EPA) to establish third party verification of the physical properties and performance of coatings that have potential to reduce air emissions. The data from the verification testing is available on the internet at the EPA’s Environmental Technology Verification (ETV) Program website (http://www.epa.gov/etv/centers/center6.html) under the “P2 Innovative Coatings and Coating Equipment Pilot.”

    1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

    1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

    General Product Information - (Show below) - (Hide below)

    Committee D 01
    Document Type Guide
    Product Note Reconfirmed 2013
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 3960 : 2005 : R2018 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
    ASTM D 6695 : 2016 : REDLINE Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
    ASTM D 4017 : 1996 : REV A Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
    ASTM D 6695 : 2003 : REV A Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
    ASTM D 3359 : 2009 : EDT 2 Standard Test Methods for Measuring Adhesion by Tape Test
    ASTM D 6886 : 2018 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography
    ASTM D 3363 : 2005 : R2011 : EDT 2 Standard Test Method for Film Hardness by Pencil Test (Withdrawn 2020)
    ASTM D 3960 : 2002 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
    ASTM D 1729 : 2016 : REDLINE Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
    ASTM D 3960 : 2001 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
    ASTM D 5767 : 2018 Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces
    ASTM D 6438 : 2005 Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
    ASTM D 2244 : 2015 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 5402 : 2006 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
    ASTM D 3960 : 2005 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
    ASTM D 3792 : 2016 : REDLINE Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
    ASTM D 2369 : 1998 Standard Test Method for Volatile Content of Coatings
    ASTM D 2244 : 2011 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 4017 : 2002 : R2015 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
    ASTM D 1735 : 1999 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
    ASTM D 1729 : 2016 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
    ASTM B 499 : 2009 : R2021 : EDT 1 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
    ASTM D 6695 : 2003 : REV B Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
    ASTM D 3792 : 1991 : EDT 1 Standard Test Method for Water Content of Water-Reducible Paints by Direct Injection into a Gas Chromatography
    ASTM D 3960 : 2005 : R2013 Standard Practice for Determining Volatile Organic Compound (VOC)Content of Paints and Related Coatings
    ASTM D 2244 : 2009 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 3363 : 2000 Standard Test Method for Film Hardness by Pencil Test
    ASTM D 6133 : 2002 : R2014 Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
    ASTM D 4017 : 1981 : R1987 : EDT 1 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
    ASTM D 3359 : 1997 Standard Test Methods for Measuring Adhesion by Tape Test
    ASTM D 2244 : 2002 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 2244 : 2016 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 4060 : 2007 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
    ASTM D 2794 : 1992 Standard Test Method for Resistence of Organic Coatings to the Effects of Rapid Deformation (Impact)
    ASTM D 2369 : 1981 : EDT 1 Standard Test Method for Volatile Content of Coatings
    ASTM D 6695 : 2001 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
    ASTM D 5767 : 2017-09 TEST METHODS FOR INSTRUMENTAL MEASUREMENT OF DISTINCTNESS-OF-IMAGE GLOSS OF COATING SURFACES
    ASTM D 2369 : 2001 Standard Test Method for Volatile Content of Coatings
    ASTM D 3363 : 2005 Standard Test Method for Film Hardness by Pencil Test
    ASTM D 2244 : 2015 : EDT 1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 6886 : 2014 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography
    ASTM D 2244 : 2009 : REV B Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 3792 : 2005 : R2009 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
    ASTM D 2244 : 2002 : EDT 1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 2369 : 2010 Standard Test Method for Volatile Content of Coatings
    ASTM D 2244 : 2015 : REV A Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 6695 : 2008 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
    ASTM D 6886 : 2012 Standard Test Method for Determination of the Individual Volatile Organic Compounds (VOCs) in Air-Dry Coatings by Gas Chromatography
    ASTM D 3792 : 1979 : EDT 2 Standard Test Method for Water Content of Water-Reducible Paints by Direct Injection into a Gas Chromatography
    ASTM D 3359 : 2009 Standard Test Methods for Measuring Adhesion by Tape Test
    ASTM D 5402 : 2019 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
    ASTM B 499 : 2009 : R2014 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
    ASTM D 1735 : 2014 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
    ASTM D 6133:2002 Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
    ASTM D 1729 : 1996 : R2009 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
    ASTM D 4060 : 2001 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
    ASTM D 2369 : 2020 Standard Test Method for Volatile Content of Coatings
    ASTM D 2244 : 2016 : REDLINE Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 3960 : 1998 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
    ASTM D 2244 : 2014 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 5767 : 1995 : R1999 Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
    ASTM D 4457 : 2002 Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph
    ASTM D 1729 : 1996 : R2003 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
    ASTM D 3359 : 2002 Standard Test Methods for Measuring Adhesion by Tape Test
    ASTM D 6438 : 1999 Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
    ASTM D 6695 : 2016 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
    ASTM D 3359 : 2009 : EDT 1 Standard Test Methods for Measuring Adhesion by Tape Test
    ASTM D 3363 : 2005 : R2011 : EDT 1 Standard Test Method for Film Hardness by Pencil Test
    ASTM D 4017 : 2002 : R2008 : EDT 1 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
    ASTM D 2794 : 1993 : R1999 : EDT 1 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
    ASTM D 2244 : 2005 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 2369 : 2007 Standard Test Method for Volatile Content of Coatings
    ASTM D 2369 : 2010 : EDT 1 Standard Test Method for Volatile Content of Coatings
    ASTM D 2794 : 1993 : R2004 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
    ASTM D 6438 : 2005 : R2015 Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
    ASTM D 3359 : 2007 Standard Test Methods for Measuring Adhesion by Tape Test
    ASTM D 1735 : 2014 : REDLINE Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
    ASTM D 5767 : 1995 : R2004 Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
    ASTM D 1735 : 2004 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
    ASTM D 2369 : 1993 Standard Test Method for Volatile Content of Coatings
    ASTM D 6133 : 2002 : R2021 Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
    ASTM D 6886 : 2003 : R2009 Standard Test Method for Speciation of the Volatile Organic Compounds (VOCs) in Low VOC Content Waterborne Air-Dry Coatings by Gas Chromatograpy
    ASTM D 6133 : 2002 : R2008 Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
    ASTM D 2244 : 2007 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 4017 : 1990 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
    ASTM D 1735 : 2008 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
    ASTM D 3792 : 2016 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
    ASTM D 4017 : 2002 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
    ASTM D 2794 : 1993 TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT)
    ASTM D 3792 : 2005 : R2015 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
    ASTM D 1729 : 1996 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
    ASTM D 3792 : 2005 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
    ASTM D 4060 : 1995 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
    ASTM D 6886 : 2014 : EDT 1 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography
    ASTM D 6695 : 2003 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
    ASTM D 2369 : 1995 Standard Test Method for Volatile Content of Coatings
    ASTM D 3363 : 2005 : R2011 Standard Test Method for Film Hardness by Pencil Test
    ASTM D 2369 : 2004 Standard Test Method for Volatile Content of Coatings
    ASTM D 6133 : 2000 Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solvent-Reducible and Water-Reducible Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
    ASTM D 3359 : 2008 Standard Test Methods for Measuring Adhesion by Tape Test
    ASTM D 5767 : 1995 : R2012 Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
    ASTM D 2794 : 1993 : R2019 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
    ASTM D 1735 : 2002 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
    ASTM D 3960 : 2004 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
    ASTM D 2369 : 1990 Standard Test Method for Volatile Content of Coatings
    ASTM D 5402 : 2006 : R2011 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
    ASTM D 5402 : 1993 : R1999 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
    ASTM D 2244 : 2009 : REV A Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 2369 : 2003 Standard Test Method for Volatile Content of Coatings
    ASTM D 2244 : 1993 : R2000 Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
    ASTM D 3792 : 1999 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
    ASTM D 522 : 1993 : REV A Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
    ASTM D 2794 : 1993 : R2010 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
    ASTM D 3359 : 2017 Standard Test Methods for Rating Adhesion by Tape Test
    ASTM D 2369 : 2010 : R2015 : EDT 1 Standard Test Method for Volatile Content of Coatings
    ASTM D 4457 : 2002 : R2008 Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph
    ASTM D 2369 : 1987 Standard Test Method for Volatile Content of Coatings
    ASTM D 3359 : 2017 : REDLINE Standard Test Methods for Rating Adhesion by Tape Test
    ASTM D 4060 : 2014 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
    ASTM D 4457 : 1985 : R1996 : EDT 1 Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph
    ASTM D 4457 : 2002 : R2014 Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph (Withdrawn 2019)
    ASTM D 4060 : 2010 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
    ASTM D 2369 : 2001 : EDT 1 Standard Test Method for Volatile Content of Coatings
    ASTM D 2369 : 1992 Standard Test Method for Volatile Content of Coatings
    ASTM D 4060 : 2019 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
    ASTM D 5402 : 2015 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
    ASTM D 6438 : 2005 : R2010 Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
    ASTM D 6886 : 2003 Standard Test Method for Speciation of the Volatile Organic Compounds (VOCs) in Low VOC Content Waterborne Air-Dry Coatings by Gas Chromatograpy
    ASTM D 5767 : 2017 Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective