ASTM D 4122 : 2017 : EDT 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Carbon Black—Evaluation of an Industry Reference Black
Hardcopy , PDF
13-06-2023
English
06-06-2017
Committee |
D 24
|
DocumentType |
Standard Practice
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice covers guidelines for the production and testing for uniformity of a lot of carbon black to be used as an Industry Reference Black (IRB).
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 8466 : 2022 | Standard Guide for Recovered Carbon Black—Carbon Black Test Methods for Testing rCB |
ASTM D 1509 : 1995 : R2012 | Standard Test Methods for Carbon Black—Heating Loss |
ASTM D 3191 : 2002 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene-Rubber)-Recipe and Evaluation Procedures |
ASTM D 3493 : 2001 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample |
ASTM D 3182 : 2015 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
ASTM D 5230 : 2005 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
ASTM D 2414 : 2008 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Oil Absorption Number (OAN) |
ASTM D 3493 : 2009 | Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN) |
ASTM D 3493 : 2006 : EDT 1 | Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN) |
ASTM D 2414 : 2008 : REV A | Standard Test Method for Carbon Black<span class='unicode'>—</span>Oil Absorption Number (OAN) |
ASTM D 3191 : 2010 : R2014 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures |
ASTM D 5230 : 2019 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
ASTM D 5230 : 2003 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
ASTM D 3192 : 2009 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
ASTM D 3493 : 2006 | Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN) |
ASTM D 1513 : 2004 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
ASTM D 3265 : 2011 | Standard Test Method for Carbon Black-Tint Strength |
ASTM D 3493 : 2004 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
ASTM D 1508 : 2002 : R2007 : EDT 1 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
ASTM D 2414 : 2022 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 2414 : 2000 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number |
ASTM D 1510 : 2007 | Standard Test Method for Carbon Black-Iodine Adsorption Number |
ASTM D 3493 : 2020 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
ASTM D 3182 : 2007 : R2012 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
ASTM D 1510 : 2019 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 3493 : 2021 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
ASTM D 1618 : 2018 | Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract |
ASTM D 2414 : 2003 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 3192 : 2005 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
ASTM D 1508 : 2023 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
ASTM D 2414 : 2016 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 1514 : 2004 | Standard Test Method for Carbon Black—Sieve Residue |
ASTM D 1510 : 2008 : REV B | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
ASTM D 6556 : 2009 | Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption |
ASTM D 3265 : 2017 : EDT 1 | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 2414 : 2006 : REV A | Standard Test Method for Carbon Black-Oil Absorption Number (OAN) |
ASTM D 1510 : 2019 : REV A | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 6556 : 2007 | Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption |
ASTM D 3493 : 2003 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample |
ASTM D 2414 : 2013 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 1508 : 2002 : EDT 1 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
ASTM D 1510 : 2011 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
ASTM D 1509 : 2018 : R2023 | Standard Test Methods for Carbon Black—Heating Loss |
ASTM D 6556 : 2002 : REV A | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
ASTM D 2414 : 2023 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 3191 : 2009 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)<span class='unicode'>—</span>Recipe and Evaluation Procedures |
ASTM D 1508 : 2002 : R2007 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
ASTM D 3265 : 2015 : REV A | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 1510 : 2008 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
ASTM D 1510 : 2016 : REV A | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 3182 : 1989 : R2006 | Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
ASTM D 6556 : 2003 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
ASTM D 2414 : 2011 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Oil Absorption Number (OAN) |
ASTM D 3265 : 2023 | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 1510 : 2003 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 3493 : 2019 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
ASTM D 2414 : 2005 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 5230 : 2014 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
ASTM D 3493 : 2007 | Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN) |
ASTM D 3192 : 2000 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
ASTM D 3493 : 2014 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
ASTM D 1513 : 2005 : EDT 1 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
ASTM D 3265 : 2015 | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 2414 : 2005 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 5230 : 2000 | Standard Test Method for Carbon Black-Automated Individual Pellet Hardness |
ASTM D 3265 : 2003 | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 5230 : 2012 : REV A | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
ASTM D 1618 : 1999 : R2004 | Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract |
ASTM D 1510 : 2017 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 3191 : 2009 : EDT 1 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)<span class='unicode'>—</span>Recipe and Evaluation Procedures |
ASTM D 6556 : 2019 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
ASTM D 1618 : 1999 : R2011 | Standard Test Method for Carbon Black Extractables<char: emdash>Transmittance of Toluene Extract |
ASTM D 3182 : 1989 : R2001 : EDT 1 | Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
ASTM D 412 : 2016 : EDT 1 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
ASTM D 1506 : 1999 : R2013 | Standard Test Methods for Carbon Black—Ash Content |
ASTM D 3493 : 2000 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample |
ASTM D 2414 : 2012 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 3265 : 2006 | Standard Test Method for Carbon Black-Tint Strength |
ASTM D 2414 : 2019 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 1508 : 2012 : R2017 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
ASTM D 1514 : 2004 : R2011 | Standard Test Method for Carbon Black<char: emdash>Sieve Residue |
ASTM D 5230 : 2010 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
ASTM D 3265 : 2013 : REV A | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 5230 : 2009 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
ASTM D 5230 : 2014 : EDT 1 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
ASTM D 3265 : 2005 | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 1513 : 2005 : R2012 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
ASTM D 1509 : 2015 | Standard Test Methods for Carbon Black—Heating Loss |
ASTM D 1510 : 2005 : REV A | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 3265 : 2019 : REV A | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 3265 : 2007 | Standard Test Method for Carbon Black-Tint Strength |
ASTM D 1510 : 2013 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 5230 : 2021 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
ASTM D 1509 : 1995 : R2000 | Standard Test Methods for Carbon Black-Heating Loss |
ASTM D 1514 : 2001 | Standard Test Method for Carbon Black—Sieve Residue |
ASTM D 3493 : 2016 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
ASTM D 2414 : 2002 | Standard Test Method for Carbon Black—Oil Absorption Number |
ASTM D 2414 : 2016 : EDT 1 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 3493 : 2018 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
ASTM D 6556 : 2002 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
ASTM D 1508 : 1999 | Standard Test Method for Carbon Black, Pelleted-Fines and Attrition |
ASTM D 1508 : 2002 : EDT 2 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
ASTM D 1508 : 2012 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
ASTM D 6556 : 2017 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
ASTM D 1510 : 1999 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 5230 : 2004 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
ASTM D 1506 : 2015 : R2020 | Standard Test Methods for Carbon Black—Ash Content |
ASTM D 412 : 2016 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
ASTM D 3191 : 2010 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)<span class='unicode'>—</span>Recipe and Evaluation Procedures |
ASTM D 1514 : 2015 | Standard Test Method for Carbon Black—Sieve Residue |
ASTM D 1508 : 2001 | Standard Test Method for Carbon Black, Pelleted-Fines and Attrition |
ASTM D 1513 : 2005 : EDT 2 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
ASTM D 2414 : 2009 : REV A | Standard Test Method for Carbon Black<span class='unicode'>—</span>Oil Absorption Number (OAN) |
ASTM D 1510 : 2009 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
ASTM D 1510 : 2012 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 1513 : 1999 : REV A : EDT 1 | Standard Test Method for Carbon Black, Pelleted-Pour Density |
ASTM D 3493 : 2004 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
ASTM D 2414 : 2006 | Standard Test Method for Carbon Black-Oil Absorption Number (OAN) |
ASTM D 3265 : 2017 | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 1510 : 2008 : REV C | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
ASTM D 3182 : 2007 | Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
ASTM D 1510 : 2007 : REV A | Standard Test Method for Carbon Black-Iodine Adsorption Number |
ASTM D 3265 : 2019 : REV B | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 2414 : 2018 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 2414 : 2017 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 3191 : 2006 : EDT 1 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)<span class='unicode'>—</span>Recipe and Evaluation Procedures |
ASTM D 1514 : 2023 | Standard Test Method for Carbon Black—Sieve Residue |
ASTM D 1618 : 1999 | Standard Test Method for Carbon Black Extractables-Transmittance of Toluene Extract |
ASTM D 1510 : 2021 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 3265 : 2013 | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 3265 : 2021 | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 2414 : 2014 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 5230 : 2004 : EDT 1 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
ASTM D 3191 : 2006 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)-Recipe and Evaluation Procedures |
ASTM D 2414 : 2006 : REV A : EDT 1 | Standard Test Method for Carbon Black-Oil Absorption Number (OAN) |
ASTM D 6556 : 2001 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
ASTM D 6556 : 2000 : REV A | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
ASTM D 2414 : 2002 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number |
ASTM D 6556 : 2014 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
ASTM D 5230 : 2012 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
ASTM D 6556 : 2001 : REV A | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
ASTM D 1510 : 2006 : REV A | Standard Test Method for Carbon Black-Iodine Adsorption Number |
ASTM D 2414 : 2001 | Standard Test Method for Carbon Black—Oil Absorption Number |
ASTM D 1510 : 2002 : REV A | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 1618 : 2017 | Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract |
ASTM D 1509 : 2018 | Standard Test Methods for Carbon Black—Heating Loss |
ASTM D 3493 : 2018 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
ASTM D 1510 : 2006 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 3493 : 2019 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
ASTM D 3493 : 2013 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
ASTM D 2414 : 2004 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 3265 : 2002 | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 1510 : 2016 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 3191 : 2000 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene-Rubber)-Recipe and Evaluation Procedures |
ASTM D 6556 : 2019 : REV A | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
ASTM D 1510 : 2005 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 6556 : 2021 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
ASTM D 1510 : 2010 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
ASTM D 5230 : 2000 : EDT 1 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
ASTM D 3182 : 1989 : R2001 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
ASTM D 1513 : 2005 : R2017 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
ASTM D 6556 : 2004 | Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption |
ASTM D 412 : 2016 : R2021 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
ASTM D 1510 : 2001 : REV A | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 3182 : 2021 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
ASTM D 3192 : 2002 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
ASTM D 1510 : 2002 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 1513 : 2005 : R2023 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
ASTM D 1514 : 2015 : R2020 | Standard Test Method for Carbon Black—Sieve Residue |
ASTM D 5230 : 2000 : EDT 2 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
ASTM D 5230 : 2013 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
ASTM D 3182 : 1989 : R1994 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
ASTM D 2414 : 2018 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 1513 : 1999 : REV A : R2004 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
ASTM D 2414 : 2021 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 6556 : 2016 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
ASTM D 1510 : 2009 : REV B | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
ASTM D 3182 : 2016 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
ASTM D 1506 : 2023 | Standard Test Methods for Carbon Black—Ash Content |
ASTM D 1506 : 1999 : R2007 | Standard Test Methods for Carbon Black-Ash Content |
ASTM D 3192 : 2009 : R2014 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
ASTM D 1514 : 2000 | Standard Test Method for Carbon Black—Sieve Residue |
ASTM D 1506 : 1999 | Standard Test Methods for Carbon Black-Ash Content |
ASTM D 3265 : 2019 | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 3265 : 2001 | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 3182 : 2021 : REV A | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
ASTM D 1510 : 2011 : REV A | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
ASTM D 1510 : 2008 : REV A | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
ASTM D 3192 : 2009 : R2019 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
ASTM D 1506 : 2015 | Standard Test Methods for Carbon Black—Ash Content |
ASTM D 1510 : 2009 : REV A | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
ASTM D 2414 : 2009 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Oil Absorption Number (OAN) |
ASTM D 3265 : 2014 | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 3265 : 2000 | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 2414 : 2013 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 3191 : 2010 : R2020 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures |
ASTM D 1509 : 1995 : R2007 | Standard Test Methods for Carbon Black-Heating Loss |
ASTM D 1510 : 2001 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 3265 : 2017 : REV A | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 1513 : 2005 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
ASTM D 6556 : 2010 | Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption |
ASTM D 5230 : 2009 : EDT 1 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
ASTM D 3182 : 2015 : REV A | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.