Skip to content
Please enter a keyword to search

  • ASTM D 4293 : 2015 : EDT 1

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication and Steam Turbine Electro-Hydraulic Control (EHC) Applications

    Available format(s):  Hardcopy, PDF

    Superseded date:  17-03-2023

    Language(s):  English

    Published date:  28-03-2018

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Scope - (Show below) - (Hide below)

    1.1This specification covers the minimum requirements for phosphate ester based fluids for turbine lubricants and electro-hydraulic control fluids, as delivered.

    1.2The use of this type of fluid is restricted to turbine systems that have been designed or modified to accommodate phosphate ester fluids.

    1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

    1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

    1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    General Product Information - (Show below) - (Hide below)

    Committee D 02
    Document Type Standard
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 4304 : 2022 Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines
    ASTM D 4304 : 2017 Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 4057 : 2019 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 974 : 2014 : EDT 2 Standard Test Method for Acid and Base Number by Color-Indicator Titration
    ASTM D 4057 : 1995 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 974 : 2001 Standard Test Method for Acid and Base Number by Color-Indicator Titration
    ASTM D 1401 : 2019 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 1298 : 2012 : REV A Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 3427 : 2003 Standard Test Method for Air Release Properties of Petroleum Oils
    ASTM D 2422 : 1997 : R2007 Standard Classification of Industrial Fluid Lubricants by Viscosity System
    ASTM D 1298 : 2012 : REV B Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 3427 : 2015 Standard Test Method for Air Release Properties of Hydrocarbon Based Oils
    ASTM D 4057 : 2012 : R2018 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 2422 : 1997 Standard Classification of Industrial Fluid Lubricants by Viscosity System
    ASTM D 6304:2016 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
    ASTM D 1401 : 2018 : REV B Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 3427 : 2014 : REV A Standard Test Method for Air Release Properties of Petroleum Oils
    ASTM D 2422 : 1997 : R2018 Standard Classification of Industrial Fluid Lubricants by Viscosity System
    ASTM D 6304 : 2004 : REV A : EDT 1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
    ASTM D 1401 : 2018 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 1401 : 2009 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 1298 : 1999 : R2005 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 4057 : 1981 : EDT 2 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 1401 : 1998 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 1298 : 2012 : REV B : R2017 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 1298 : 2012 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 445 : 2021 : EDT 2 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 6304 : 2007 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration (Withdrawn 2016)
    ASTM D 974 : 2021 Standard Test Method for Acid and Base Number by Color-Indicator Titration
    ASTM D 6304 : 2004 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
    ASTM D 1298 : 1999 : EDT 2 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 1169 : 2002 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
    ASTM D 6304 : 2016 : EDT 1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
    ASTM D 3427 : 2002 Standard Test Method for Air Release Properties of Petroleum Oils
    ASTM D 6304 : 2004 : REV A Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
    ASTM D 445 : 1988 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)
    ASTM D 1298 : 1999 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 6304 : 2004 : EDT 1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
    ASTM D 4057 : 2006 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 6304 : 2000 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
    ASTM D 4057 : 2012 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 3427 : 2014 : REV A : EDT 1 Standard Test Method for Air Release Properties of Petroleum Oils
    ASTM D 664 : 1995 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
    ASTM D 7546 : 2009 Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor
    ASTM D 1169 : 2009 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
    ASTM D 1298 : 1999 : EDT 1 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 1169 : 2011 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
    ASTM D 445 : 2019 : REV A Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 97 : 2017 : REV B Standard Test Method for Pour Point of Petroleum Products
    ASTM D 1401 : 2002 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 1169 : 1995 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
    ASTM D 1401 : 2021 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 6304 : 2003 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
    ASTM D 7546 : 2015 Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor
    ASTM D 445 : 2001 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
    ASTM D 97 : 2017 : REV B : R2022 Standard Test Method for Pour Point of Petroleum Products
    ASTM D 445 : 2021 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 1401 : 2012 : EDT 1 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 1169 : 2002 : EDT 1 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
    ASTM D 3427 : 2006 Standard Test Method for Air Release Properties of Petroleum Oils
    ASTM D 4057 : 2022 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 2422 : 1997 : R2013 Standard Classification of Industrial Fluid Lubricants by Viscosity System
    ASTM D 3427 : 2007 Standard Test Method for Air Release Properties of Petroleum Oils
    ASTM D 3427 : 2019 Standard Test Method for Air Release Properties of Hydrocarbon Based Oils
    ASTM D 1169 : 2019 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
    ASTM D 1298 : 1985 : R1990 : EDT 1 Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 2422 : 1997 : R2002 Standard Classification of Industrial Fluid Lubricants by Viscosity System
    ASTM D 1401 : 2018 : REV A Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 3427 : 2012 Standard Test Method for Air Release Properties of Petroleum Oils
    ASTM D 1401 : 2012 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 445 : 2021 : EDT 1 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 4057 : 1995 : R2000 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 3427 : 2014 Standard Test Method for Air Release Properties of Petroleum Oils
    ASTM D 1169 : 2019 : REV A Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
    ASTM D 1401 : 2010 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 4057 : 2006 : R2011 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 3427 : 1999 Standard Test Method for Air Release Properties of Petroleum Oils
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective