ASTM D 4303 : 2010 : R2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials
Hardcopy , PDF
30-12-2022
English
11-07-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 06.02, 2017 Describes four test methods to accelerate the effects of long term indoor illumination on artists' materials are: A - Exposure in southern Florida to natural daylight filtered through window glass. B - Exposure in Arizona to natural daylight filtered through window glass. C - Exposure in a non-humidity controlled xenon-arc device simulating daylight filtered through window glass. D - Exposure in a humidity controlled xenon-arc device simulating daylight filtered through window glass.
| Committee |
D 01
|
| DocumentType |
Test Method
|
| Pages |
6
|
| ProductNote |
Reconfirmed 2016
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1Four test methods to accelerate the effects of long term indoor illumination on artists’ materials are described below. One of the natural daylight methods and one of the xenon-arc methods are used to categorize the lightfastness of colorants.
1.1.1Test Method A—Exposure in southern Florida to natural daylight filtered through window glass.
1.1.2Test Method B—Exposure in Arizona to natural daylight filtered through window glass.
1.1.3Test Method C—Exposure in a non-humidity controlled xenon-arc device simulating daylight filtered through window glass.
1.1.4Test Method D—Exposure in a humidity controlled xenon-arc device simulating daylight filtered through window glass.
1.2These test methods are used to approximate the color change that can be expected over time in colorants used in artists' materials exposed indoors to daylight through window glass.
Note 1:The color changes that result from accelerated exposure may not duplicate the results of normal indoor exposure in a home, art gallery, or museum. The relative resistance to change, however, can be established so colored materials can be assigned to categories of relative lightfastness.
Note 2:Users who wish to test colored materials under fluorescent illumination should consult Practice D4674.
1.3Lightfastness categories are established to which colorants are assigned based on the color difference between specimens before and after exposure.
1.4Color difference units are calculated by the CIE 1976 L*a*b* color difference equation.
1.5These test methods apply to colored artists’ materials.
1.6The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.7This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 4302 : 2014 | Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints |
| ASTM G 24 : 2013 | Standard Practice for Conducting Exposures to Daylight Filtered Through Glass |
| ASTM D 5098 : 2016 | Standard Specification for Artists' Acrylic Dispersion Paints |
| ASTM D 5724 : 2016 | Standard Specification for Gouache Paints |
| ASTM D 4838 : 1988 : R2016 | Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints (Withdrawn 2023) |
| ASTM D 5067 : 2016 | Standard Specification for Artists' Watercolor Paints |
| ASTM D 6901 : 2015 | Standard Specification for Artists' Colored Pencils |
| ASTM D 5098 : 2016 : R2021 | Standard Specification for Artists' Acrylic Dispersion Paints |
| ASTM D 6901 : 2015 : R2021 | Standard Specification for Artists' Colored Pencils |
| ASTM D 5067 : 2016 : R2021 | Standard Specification for Artists' Watercolor Paints |
| ASTM D 4302 : 2014 : R2021 | Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints |
| ASTM D 5724 : 2016 : R2021 | Standard Specification for Gouache Paints |
| ASTM D 5383 : 2016 : R2021 | Standard Practice for Visual Determination of the Lightfastness of Art Materials by Artists and Art Technologists |
| ASTM G 24 : 2021 | Standard Practice for Conducting Exposures to Daylight Filtered Through Glass |
| ASTM D 5383 : 2016 | Standard Practice for Visual Determination of the Lightfastness of Art Materials by Artists and Art Technologists |
| ASTM D 5724 : 2016 | Standard Specification for Gouache Paints |
| ASTM D 5067 : 2005 | Standard Specification for Artists' Watercolor Paints |
| ASTM E 1348 : 1990 | Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM D 5724 : 2006 | Standard Specification for Gouache Paints |
| ASTM D 6901 : 2004 | Standard Specification for Artists' Colored Pencils |
| ASTM D 5067 : 2016 : REDLINE | Standard Specification for Artists' Watercolor Paints |
| ASTM D 2244 : 2021 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM G 141 : 2009 : R2021 | Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials |
| ASTM E 1347 : 2006 : R2020 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM D 4302 : 2005 : R2010 | Standard Specification for Artists' Oil, Resin-Oil, and Alkyd Paints |
| ASTM D 5098 : 2005 | Standard Specification for Artists' Acrylic Dispersion Paints |
| ASTM D 5098 : 2005 : REV A : R2010 | Standard Specification for Artists' Acrylic Dispersion Paints |
| ASTM G 141 : 2009 : R2013 | Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials |
| ASTM G 24 : 2021 | Standard Practice for Conducting Exposures to Daylight Filtered Through Glass |
| ASTM D 2244 : 2015 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2244 : 2011 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 5067 : 2016 | Standard Specification for Artists' Watercolor Paints |
| ASTM D 5724 : 2006 : R2010 | Standard Specification for Gouache Paints |
| ASTM D 5067 : 2016 : R2021 | Standard Specification for Artists' Watercolor Paints |
| ASTM E 1348 : 2011 | Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM D 2244 : 2009 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 5098 : 2005 : REV A | Standard Specification for Artists' Acrylic Dispersion Paints |
| ASTM D 4674 : 2002 : REV A | Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments |
| ASTM E 1347 : 2006 : R2015 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM D 4674 : 2019 | Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments |
| ASTM D 2244 : 2002 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2244 : 2016 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 284 : 2022 | Standard Terminology of Appearance |
| ASTM D 5098 : 2003 | Standard Specification for Artists' Acrylic Dispersion Paints |
| ASTM E 1348 : 2022 | Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM E 1347 : 2003 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry |
| ASTM D 4674 : 2002 : REV A : R2010 | Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments (Withdrawn 2019) |
| ASTM D 2244 : 2015 : EDT 1 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2244 : 2009 : REV B | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2244 : 2002 : EDT 1 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 5098 : 2016 : REDLINE | Standard Specification for Artists' Acrylic Dispersion Paints |
| ASTM D 5724 : 2005 | Standard Specification for Gouache Paints |
| ASTM D 4302 : 2014 : R2021 | Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints |
| ASTM D 6901 : 2015 : R2021 | Standard Specification for Artists' Colored Pencils |
| ASTM E 284 : 2017 : REDLINE | Standard Terminology of Appearance |
| ASTM D 2244 : 2015 : REV A | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1347 : 1997 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry |
| ASTM D 6901 : 2015 | Standard Specification for Artists' Colored Pencils |
| ASTM E 1349 : 2006 : R2013 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
| ASTM D 6901 : 2003 | Standard Specification for Artists' Colored Pencils |
| ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1348 : 1990 : R1996 | Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM D 2244 : 2014 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1347 : 2006 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM E 1348 : 2015 : EDT 1 | Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM G 155 : 2021 | Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials |
| ASTM D 2244 : 2005 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 5724 : 1999 | Standard Specification for Gouache Paints |
| ASTM E 1348 : 2002 : R2007 | Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM D 5067 : 1999 | Standard Specification for Artists' Watercolor Paints |
| ASTM D 4302 : 2005 | Standard Specification for Artists' Oil, Resin-Oil, and Alkyd Paints |
| ASTM E 1349 : 1990 : R1998 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry |
| ASTM D 4302 : 1999 | Standard Specification for Artists' Oil, Resin-Oil, and Alkyd Paints |
| ASTM E 1349 : 2006 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45:0 or 0:45) Geometry |
| ASTM D 2244 : 2007 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 5067 : 2005 : R2010 | Standard Specification for Artists' Watercolor Paints |
| ASTM G 155 : 2013 : REDLINE | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
| ASTM D 2244 : 2022 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM G 155 : 2013 | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
| ASTM E 1347 : 2006 : R2011 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM D 6901 : 2006 | Standard Specification for Artists' Colored Pencils (Withdrawn 2015) |
| ASTM G 113 : 2016 : REDLINE | Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials |
| ASTM D 5724 : 2016 : REDLINE | Standard Specification for Gouache Paints |
| ASTM D 5098 : 1999 | Standard Specification for Artists' Acrylic Emulsion Paints |
| ASTM D 5724 : 2016 : R2021 | Standard Specification for Gouache Paints |
| ASTM D 4674 : 1989 : R1997 | Standard Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight |
| ASTM G 113 : 2016 | Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials |
| ASTM E 1349 : 2006 : R2022 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
| ASTM E 1348:2002 | Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM D 4302 : 2014 : REDLINE | Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints |
| ASTM D 2244 : 2009 : REV A | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2244 : 1993 : R2000 | Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates |
| ASTM D 5098 : 2016 : R2021 | Standard Specification for Artists' Acrylic Dispersion Paints |
| ASTM D 5098 : 2016 | Standard Specification for Artists' Acrylic Dispersion Paints |
| ASTM D 4674 : 2002 | Standard Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight |
| ASTM E 1349 : 2006 : R2018 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
| ASTM E 284 : 2017 | Standard Terminology of Appearance |
| ASTM G 113 : 2022 | Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials |
| ASTM D 4302 : 2014 | Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints |
| ASTM G 24 : 2013 : REDLINE | Standard Practice for Conducting Exposures to Daylight Filtered Through Glass |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.