ASTM D 5531 : 2017 : REDLINE
|
Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
ASTM D 3134 : 2015 : REDLINE
|
Standard Practice for Establishing Color and Gloss Tolerances |
DIN EN ISO 19712-2:2013-04
|
Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007) |
MIL-DTL-43719 Revision D:2009
|
MARKING MATERIALS AND MARKERS, ADHESIVE, ELASTOMERIC, PIGMENTED; GENERAL SPECIFICATION FOR |
MIL-PRF-32239 Revision A:2014
|
COATING SYSTEM, ADVANCED PERFORMANCE, FOR AEROSPACE APPLICATIONS |
DOD-E-18214 Revision B:1978
|
ENAMEL, INTERIOR, DECK, DARK GREEN (FORMULA NO. 19) (METRIC) |
FED-STD-595 Revision C:2008
|
COLORS USED IN GOVERNMENT PROCUREMENT |
MIL-DTL-24607 Revision B:2008
|
ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS |
SDI A250.3 : 2007(R2011)
|
TEST PROCEDURE AND ACCEPTANCE CRITERIA FOR - FACTORY APPLIED FINISH COATINGS FOR STEEL DOORS AND FRAMES |
MIL-DTL-1115 Revision E:2010
|
ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
ASTM D 2985 : 1992 : R2002 : EDT 1
|
Standard Test Method for Color of Asbestos |
DIN EN 15886 E : 2010
|
CONSERVATION OF CULTURAL PROPERTY - TEST METHODS - COLOUR MEASUREMENT OF SURFACES |
DIN EN ISO 19712-2 E : 2013
|
PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS (ISO 19712-2:2007) |
A-A-52561 Revision B:2004
|
INK, PRINTING: LITHOGRAPHIC OFFSET, WITH DRIER |
DOD E 24635 : (1)
|
ENAMEL, GRAY, SILICONE ALKYD COPOLYMER SEMIGLOSS (FOR EXTERIOR USE) (METRIC) |
TT-P-1952 Revision F:2015
|
PAINT, TRAFFIC AND AIRFIELD MARKING, WATERBORNE |
A-A-3067 Base Document:1996
|
PAINT: ALKYD, EXTERIOR, LOW VOC |
UNE-EN ISO 19712-2:2013
|
Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007) |
ASTM D 6901 : 2015
|
Standard Specification for Artists' Colored Pencils |
DOD P 24631 : (1) SUPP 1
|
PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
MIL-DTL-24631 Revision A:1997
|
PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
MIL-PRF-24763 Revision B:2009
|
ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
MIL-PRF-24712 Revision B:2014
|
COATINGS, POWDER, THERMOSETTING |
A-A-3054 Base Document:1996
|
PAINT: HEAT RESISTING (204 DEGREES C) |
MIL-PRF-29598 Base Document:1996
|
FILM, PROTECTIVE, LEADING EDGE (PRESSURE-SENSITIVE) |
MIL-PRF-22750 Revision G:2011
|
COATING, EPOXY, HIGH-SOLIDS |
ASTM E 2167 : 2001
|
Standard Guide for Selection and Use of Stone Consolidants |
A-A-3164 Revision A:2007
|
SYNTHETIC LACQUER, CAMOUFLAGE, EXTERIOR, VOC COMPLIANT |
MIL-DTL-24441 Revision D:2009
|
PAINT, EPOXY-POLYAMIDE, GENERAL SPECIFICATION FOR |
ASTM F 2035 : 2000 : R2011
|
Standard Practice for Measuring the Dark Stability of Ink Jet Prints (Withdrawn 2020) |
ASTM F 2035 : 2000 : R2006
|
Standard Practice for Measuring the Dark Stability of Ink Jet Prints |
ASTM D 2066 : 2007
|
Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions |
ASTM D 3927 : 1987
|
Guide for State and Institutional Purchasing of Paint (Withdrawn 1991) |
TT-P-24 Revision E:1985
|
PAINT, OIL (EXTERIOR CONCRETE AND MASONRY |
ASTM F 2037 : 2000 : R2006
|
Standard Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions in Typical Office Environments |
ASTM C 1510 : 2001 : R2012
|
Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry |
MIL-F-22735 Revision C:1980
|
FILM, ELASTOMERIC, FLUORESCENT, FOR WEAPONS SYSTEMS |
ASTM D 5324 : 2016 : REDLINE
|
Standard Guide for Testing Water-Borne Architectural Coatings |
ASTM D 3322 : 1982 : R2001
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM D 5382 : 2002 : R2007
|
Standard Guide to Evaluation of Optical Properties of Powder Coatings |
ASTM D 5382 : 2002
|
Standard Guide to Evaluation of Optical Properties of Powder Coatings |
ASTM D 4674 : 2002 : REV A
|
Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments |
AWWA D108 : 2010
|
ALUMINUM DOME ROOFS FOR WATER STORAGE FACILITIES |
ASTM D 3451 : 2006 : R2017
|
Standard Guide for Testing Coating Powders and Powder Coatings |
ASTM D 2745 : 2000
|
Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements |
ASTM D 2248 : 2001 : REV A : R2007
|
Standard Practice for Detergent Resistance of Organic Finishes |
ASTM D 387 : 2000 : R2017
|
Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller (Withdrawn 2023) |
ASTM F 2037 : 2000
|
Standard Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions in Typical Office Environments |
ASTM E 1331 : 2015 : REDLINE
|
Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
ASTM D 2248 : 2001 : REV A : R2018
|
Standard Practice for Detergent Resistance of Organic Finishes |
ASTM F 2589 : 2016 : REDLINE
|
Standard Specification for Ornamental Fences Employing Steel Tubular Pickets |
ASTM F 940:1999
|
Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
ASTM D 5150 : 1992 : R2017
|
Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
ASTM D 3719 : 2000
|
Standard Test Method for Quantifying Dirt Collection on Coated Exterior Panels (Withdrawn 2009) |
ASTM E 991 : 2016 : REDLINE
|
Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method |
ASTM C 1650 : 2014 : REDLINE
|
Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated |
ASTM D 5215 : 1993 : R2012
|
Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives |
ASTM D 5215 : 1993 : R1999
|
Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives |
ASTM E 1247 : 2012
|
Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry |
ASTM D 3424 : 2011 : REDLINE
|
Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter |
ASTM F 1515 : 2015 : REDLINE
|
Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change |
ASTM D 4303 : 2010 : R2016
|
Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials |
ASTM E 1347 : 2006 : R2011
|
Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
TT-E-2784 Revision A:1991
|
ENAMEL (ACRYLIC EMULSION, EXTERIOR GLOSS AND SEMIGLOSS) |
ASTM F 2292 : 2003
|
Standard Practice for Determining the Waterfastness of Images Produced by Ink Jet Printers Utilizing Four Different Test Methods—Drip, Spray, Submersion and Rub |
TT-E-527 Revision D:1988
|
ENAMEL, ALKYD, LUSTERLESS, LOW VOC CONTENT |
15/30322609 DC : 0
|
BS ISO 13655 - GRAPHIC TECHNOLOGY - SPECTRAL MEASUREMENT AND COLORIMETRIC COMPUTATION FOR GRAPHIC ARTS IMAGES |
SSPC-PAINT 38 : 2013
|
SINGLE-COMPONENT MOISTURE-CURE WEATHERABLE ALIPHATIC POLYURETHANE TOPCOAT, PERFORMANCE-BASED |
DOD E 700 : A
|
ENAMEL, DECK, INTERIOR, GRAY (FORMULA NO.20L) (METRIC) |
MIL-P-24351 Revision A:1985
|
PRIMER COATING, ALKYD, BLUE (FORMULA NO. 6N35-2) |
ASTM F 1946 : 2004
|
Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight |
SAE AMS P 21600 : 2013
|
PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION |
TT-P-001385 Base Document:1976
|
PRIMER COATING, SYNTHETIC, GRAY (FOR METAL EQUIPMENT) |
BS ISO 19712-2 : 2007
|
PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS |
MIL P 24441 : B
|
PAINT, EPOXY POLYAMIDE, GENERAL SPECIFICATION FOR |
ASTM D 3730 : 2017 : REDLINE
|
Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
ASTM F 1945 : 2005
|
Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting |
06/30147348 DC : DRAFT MAR 2006
|
ISO 19712-3 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES |
TT-E-490 Revision E:1975
|
ENAMEL, SILICONE ALKYD COPOLYMER, SEMIGLOSS (FOR EXTERIOR & INTERIOR NON RESIDENTIAL USE) |
MIL E 24635 : B
|
ENAMEL, SILICONE ALKYD COPOLYMER (METRIC) |
ASTM D 4674 : 2002
|
Standard Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight |
ASTM C 1510 :2001
|
Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry |
MIL A 8625 : F
|
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
TT-E-489 Revision J:1994
|
ENAMEL, ALKYD, GLOSS, (FOR EXTERIOR AND INTERIOR SURFACES) |
TT-P-2756 Revision A:1996
|
POLYURETHANE COATING - SELF-PRIMING TOPCOAT, LOW VOLATILE ORGANIC COMPOUND (VOC) CONTENT |
ASTM F 1206 : 1994 : R2005
|
Standard Test Method for Evaluating Color Image Output from Color Printers and Copiers |
ASTM D 7793 : 2017 : REDLINE
|
Standard Specification for Insulated Vinyl Siding |
MIL-PRF-81352 Revision C:2005
|
COATINGS, AIRCRAFT TOUCH-UP |
MIL-C-29475 Base Document:1994
|
COATING, WATER BORNE POLYURETHANE CAMOUFLAGE |
ASTM D 279 : 2002 : R2012
|
Standard Test Methods for Bleeding of Pigments |
ASTM D 279 : 2002
|
Standard Test Methods for Bleeding of Pigments |
CSA B45.8 : 2013
|
TERRAZZO, CONCRETE, AND NATURAL STONE PLUMBING FIXTURES |
ISO 13655:2017
|
Graphic technology — Spectral measurement and colorimetric computation for graphic arts images |
SAE AMS 3603 : 2002
|
PROTECTIVE FILM, HIGH PERFORMANCE, POLYMERIC PRESSURE SENSITIVE ADHESIVE, FOR AIRCRAFT EXTERIOR APPLICATIONS |
ASTM D 7270 : 2007 : R2013
|
Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings |
SSPC-PAINT 36 : 2013
|
TWO-COMPONENT WEATHERABLE ALIPHATIC POLYURETHANE TOPCOAT, PERFORMANCE-BASED |
UNI EN 15886 : 2010
|
CONSERVATION OF CULTURAL PROPERTY - TEST METHODS - COLOUR MEASUREMENT OF SURFACES |
ASTM F 2292 : 2003 : R2008
|
Standard Practice for Determining the Waterfastness of Images Produced by Ink Jet Printers Utilizing Four Different Test Methods—Drip, Spray, Submersion and Rub (Withdrawn 2016) |
ASTM D 4141/D4141M : 2014 : REDLINE
|
Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
ASTM F 2292 : 2003 : EDT 1
|
Standard Practice for Determining the Waterfastness of Images Produced by Ink Jet Printers Utilizing Four Different Test Methods-Drip, Spray, Submersion and Rub |
ASTM C 1520 : 2002 : R2010
|
Standard Guide for Paintability of Latex Sealants |
ASTM D 5319 : 2017 : REDLINE
|
Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels |
ASTM E 1347 : 2006 : R2015
|
Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
ASTM D 3322 : 1982 : R2011
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM E 805 :2012
|
Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
ASTM E 1345 : 1998
|
Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
ASTM D 4302 : 2014 : REDLINE
|
Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints |
ASTM E 1345 : 1998 : R2008
|
Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
UNI EN ISO 19712-3 : 2013
|
PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES |
ASTM F 940 : 1999 : R2009
|
Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
ASTM D 3322 : 1982 : R2005
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM C 609 : 2007 : R2014
|
Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile |
ASTM D 2248 : 2001
|
Standard Practice for Detergent Resistance of Organic Finishes |
ASTM G 178 : 2016 : REDLINE
|
Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique |
ASTM F 940 : 1999 : R2013
|
Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
ASTM D 5150 : 1992 : R2013
|
Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
ASTM F 934 : 1996 : R2017
|
Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials |
ASTM D 7990 : 2015
|
Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature Rise in Polymeric Siding |
ASTM C 744 : 2016 : REDLINE
|
Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units |
ASTM D 868 : 2010 : R2015
|
Standard Practice for Determination of Degree of Bleeding of Traffic Paint |
ASTM E 2167 : 2001 : R2008
|
Standard Guide for Selection and Use of Stone Consolidants (Withdrawn 2017) |
ASTM D 2248 : 2001 : REV A : R2013
|
Standard Practice for Detergent Resistance of Organic Finishes |
ASTM D 333 : 2001 : R2007
|
Standard Guide for Clear and Pigmented Lacquers |
ASTM F 1206 : 1994 : R2011 : EDT 1
|
Standard Test Method for Evaluating Color Image Output from Color Printers and Copiers (Withdrawn 2020) |
ASTM D 345 : 2002
|
Side bearings of the freight wagon bogies. General specifications |
DOD E 24607 : A
|
ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) |
ASTM F 934 : 1996 : R2013
|
Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials |
ASTM E 805 : 2012 : REV A
|
Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
MIL-PRF-23236 Revision D:2009
|
Coating Systems for Ship Structures |
07/30174471 DC : 0
|
BS ISO 13655 - GRAPHIC TECHNOLOGY - SPECTRAL MEASUREMENT AND COLORIMETRIC COMPUTATION FOR GRAPHIC ARTS IMAGES |
MIL C 22750 : F
|
COATING, EPOXY, VOC-COMPLIANT |
ASTM F 934 : 1996
|
Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials |
TT-S-001992 Base Document:1975
|
STAIN, LATEX, EXTERIOR FOR WOOD SURFACES |
ASTM E 842 : 1982
|
Specification for Lawn Buildings (Withdrawn 1990) |
DOD-E-18210 Revision B:1978
|
ENAMEL, INTERIOR, DECK, RED (FORMULA NO. 23) (METRIC) |
ASTM D 868 : 2010
|
Standard Practice for Determination of Degree of Bleeding of Traffic Paint |
BS EN 15886:2010
|
Conservation of cultural property. Test methods. Colour measurement of surfaces |
AASHTO M 268 : 2015
|
SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR FLAT AND VERTICAL TRAFFIC CONTROL APPLICATIONS |
MIL-PRF-85285 Revision E:2012
|
COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
MIL-DTL-15090 Revision E:2010
|
ENAMEL, EQUIPMENT, LIGHT GRAY, (NAVY FORMULA NO. 111) |
ASTM E 1345 : 1998 : R2008 : EDT 1
|
Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
ASTM D 3022 : 1984 : R2011
|
Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill (Withdrawn 2020) |
ASTM D 4712 : 1987 : REV A : R2001
|
Standard Guide for Testing Industrial Water-Reducible Coatings |
A-A-3165 Revision A:2007
|
LACQUER, GLOSS, FOR AIRCRAFT USE |
ASTM C 1649 : 2014 : REDLINE
|
Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated |
ASTM D 5326 : 1994 : REV A : R2009
|
Standard Test Method for Color Development in Tinted Latex Paints |
ASTM D 5150 : 1992 : R2009
|
Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
CSA Z107.9 : 2000 : R2004
|
STANDARD FOR CERTIFICATION OF NOISE BARRIERS |
MIL-P-15931 Revision F:1991
|
PAINT, ANTIFOULING, VINYL (FORMULAS NO. 121A, AND 129A) |
MIL-PRF-24635 Revision E:2009
|
COATING SYSTEMS, WEATHER-RESISTANT, EXTERIOR USE |
ASTM E 2808 : 2011
|
Standard Guide for Microspectrophotometry and Color Measurement in Forensic Paint Analysis |
ASTM D 6577 : 2015 : REDLINE
|
Standard Guide for Testing Industrial Protective Coatings |
SAE AMS A 8625 : 2003
|
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
ASTM D 3323 : 1980 : R1988 : EDT 1
|
Guide for Testing Interior Solvent-Thinned Flat Wall Paints (Withdrawn 1993) |
ASTM D 3679 : 2017 : REDLINE
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding |
ASTM D 387 : 2000
|
Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller |
ASTM F 2035 : 2000
|
Standard Practice for Measuring the Dark Stability of Ink Jet Prints |
ASTM F 934 : 1996 : R2008
|
Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials |
ASTM D 333 : 2001 : R2013
|
Standard Guide for Clear and Pigmented Lacquers |
ASTM D 3322 : 1982 : R1996 : EDT 1
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM D 4712 : 1987 : REV A : R1996
|
Standard Guide for Testing Industrial Water-Reducible Coatings |
ASTM D 4477 : 2016 : REDLINE
|
Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit |
ASTM E 1347 : 2006
|
Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
ASTM F 1514 : 2003 : R2013
|
Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change |
ASTM D 4973 : 1993
|
Specification for White Rigid Poly(Vinyl Chloride)(PVC) Insulating Storm Windows (Withdrawn 1999) |
ASTM F 2408 : 2016 : REDLINE
|
Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets |
ASTM D 2248 : 2001 : REV A
|
Standard Practice for Detergent Resistance of Organic Finishes |
ASTM F 1206 : 1994 : R2000
|
Standard Test Method for Evaluating Color Image Output from Color Printers and Copiers |
ONORM EN ISO 19712-3 : 2013
|
PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007) |
ASTM C 609 : 2007
|
Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile |
BS EN ISO 19712-2:2013
|
Plastics. Decorative solid surfacing materials Determination of properties. Sheet goods |
ASTM F 925 : 2013 : REDLINE
|
Standard Test Method for Resistance to Chemicals of Resilient Flooring |
ASTM D 3451 : 2006
|
Standard Guide for Testing Coating Powders and Powder Coatings |
ASTM D 2336 : 1999
|
Standard Guide for Specifying Factory Applied Wood Coatings (Withdrawn 2008) |
A-A-3185 Base Document:2001
|
PAINT, LATEX (CONTAINING POST-CONSUMER MATERIAL) |
BS ISO 13655:2017
|
Graphic technology. Spectral measurement and colorimetric computation for graphic arts images |
MIL-DTL-32000 Base Document:2003
|
Paint, Face, Camouflage |
ASTM E 1345 : 1998 : R2003
|
Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
BS ISO 19712-3 : 2007
|
PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES |
ASTM E 805 : 2012 : REV A : R2017
|
Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
MIL-P-7962 Revision D:1980
|
PRIMER COATING, CELLULOSE NITRATE MODIFIED ALKYD TYPE, CORROSION INHIBITING, FAST DRYING [FOR SPRAY APPLICATION OVER PRETREATMENT COATING |
TT P 002118 : LATEST
|
PAINT, TREE MARKING |
TT P 001952 : C
|
PAINT, TRAFFIC AND AIRFIELD MARKING, WATERBORNE |
AASHTO R 31 : 2009 : R2014
|
PRACTICE FOR EVALUATION OF PROTECTIVE COATING SYSTEMS FOR STRUCTURAL STEEL |
ASTM D 2276 : 2006 : R2014
|
Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling |
07/30137506 DC : 0
|
BS ISO 19712-1 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 1: CLASSIFICATION AND SPECIFICATIONS |
ASTM D 2985 : 1992 : R2006
|
Standard Test Method for Color of Asbestos |
ASTM F 1514 : 2003
|
Standard Test Method for Measuring Heat Stability of Resilient Vinyl Flooring by Color Change |
SAE AMS 3143 : 2016
|
POWDER COATING MATERIAL |
ASTM D 4587 : 2011 : REDLINE
|
Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
TAPPI T 1215 : 2012
|
THE DETERMINATION OF INSTRUMENTAL COLOR DIFFERENCE |
A-A-3058 Base Document:1996
|
PAINT, INTERIOR, FIRE RETARDANT |
MIL P 24647 : B
|
PAINT SYSTEM, ANTICORROSIVE & ANTIFOULING, SHIP HULL |
MIL E 24763 : A
|
ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
ASTM F 2366 : 2012 : REDLINE
|
Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus |
CSA Z107.9 : 2000
|
STANDARD FOR CERTIFICATION OF NOISE BARRIERS |
ASTM D 3451 : 2006 : R2012
|
Standard Guide for Testing Coating Powders and Powder Coatings |
AASHTO TP 103 : 2013 : R2015
|
METHOD OF TEST FOR DETECTABLE WARNING SYSTEMS |
SAE AMSSTD595A:2017
|
COLORS USED IN GOVERNMENT PROCUREMENT |
AASHTO TP 103 : 2013(R2018)
|
METHOD OF TEST FOR DETECTABLE WARNING SYSTEMS |
ASTM D 5150 : 1992 : R1997 : EDT 1
|
Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
I.S. EN ISO 19712-3:2013
|
PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007) |
ASTM D 4712 : 1987 : REV A : R2005
|
Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
ASTM F 923 : 2000
|
Standard Guide to Properties of High Visibility Materials Used to Improve Individual Safety (Withdrawn 2006) |
ASTM E 2301 : 2012 : R2017
|
Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry |
ASTM D 5326 : 1994 : REV A : R2013
|
Standard Test Method for Color Development in Tinted Latex Paints |
ASTM C 1520 : 2002
|
Standard Guide for Paintability of Latex Sealants |
ASTM E 2301 : 2012
|
Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry |
ASTM D 5382 : 2002 : R2017
|
Standard Guide to Evaluation of Optical Properties of Powder Coatings |
ASTM D 5215 : 1993
|
TEST METHOD FOR INSTRUMENTAL EVALUATION OF STAINING OF VINYL FLOORING BY ADHESIVES |
ASTM F 934 : 1996 : R2003
|
Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials |
ASTM C 1510 : 2001 : R2016
|
Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry |
ASTM D 333 : 2001
|
Standard Guide for Clear and Pigmented Lacquers |
ASTM D 6531 : 2000
|
Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement |
ASTM D 2745 : 2000 : R2017
|
Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements |
SSPC-PAINT 39 : 2015
|
TWO-COMPONENT ALIPHATIC POLYUREA TOPCOAT, FAST- OR MODERATE-DRYING, PERFORMANCE-BASED |
ASTM D 2985 : 1992 : R2002
|
Standard Test Method for Color of Asbestos |
ASTM D 7932 : 2017
|
Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments |
ASTM D 5150 : 1992 : R2003
|
Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
ASTM E 1349 : 2006
|
Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45:0 or 0:45) Geometry |
GOST 849:2018
|
Primary nickel. SpecificationsE |
ISO 19712-3:2007
|
Plastics Decorative solid surfacing materials Part 3: Determination of properties Solid surface shapes |
ISO 19712-2:2007
|
Plastics Decorative solid surfacing materials Part 2: Determination of properties Sheet goods |
EN 15886:2010
|
Conservation of cultural property - Test methods - Colour measurement of surfaces |
EN ISO 19712-2:2013
|
Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007) |
EN ISO 19712-3:2013
|
Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007) |
ASTM F 940 : 1999 : R2005
|
Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
A-A-3183 Base Document:2000
|
PAINT, LATEX, EXTERIOR, (FOR WOOD AND MASONRY) |
ASTM D 6695 : 2016 : REDLINE
|
Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
BS EN ISO 19712-3:2013
|
Plastics. Decorative solid surfacing materials Determination of properties. Solid surface shapes |
DOD-E-698 Revision C:1978
|
ENAMEL, ALKYD, DECK, BLACK (FORMULA NO. 24) |
ASTM D 279 : 2002 : R2007
|
Standard Test Methods for Bleeding of Pigments |
MIL-P-6884 Revision F:1973
|
PAINT, CAMOUFLAGE OR TEMPORARY IDENTIFICATION, SOLVENT REMOVABLE |
TT-E-529 Revision G:1988
|
ENAMEL, ALKYD, SEMIGLOSS, LOW VOC CONTENT |
DIN EN 15886:2010-12
|
Conservation of cultural property - Test methods - Colour measurement of surfaces |
ASTM C 1520 : 2002 : R2015 : EDT 1
|
Standard Guide for Paintability of Latex Sealants |
UNI EN ISO 19712-2 : 2013
|
PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS |
ASTM C 1510 : 2001 : R2007
|
Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry |
ASTM E 1345 : 1998 : R2014
|
Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
06/30137509 DC : DRAFT MAR 2006
|
ISO 19712-2 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS |
08/30191159 DC : DRAFT DEC 2008
|
BS EN 15886 - CONSERVATION OF CULTURAL PROPERTY - TEST METHODS - COLOUR MEASUREMENT OF SURFACES |
BS 2782-5:Methods 530A and 530B:1976
|
Methods of testing plastics. Optical and colour properties, weathering Determination of yellowness index. Determination of the colour of near-white or near-colourless materials |
TT-E-001384 Base Document:1979
|
ENAMEL, GLOSS, SYNTHETIC (FOR METAL EQUIPMENT) |
ASTM D 6763 : 2016 : REDLINE
|
Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
MIL-PRF-24647 Revision E:2013
|
PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL |
TT-E-1593 Revision B:1974
|
ENAMEL, SILICONE ALKYD COPOLYMER, GLOSS (FOR EXTERIOR AND INTERIOR USE) |
ASTM D 2454 : 2014-03
|
PRACTICE FOR DETERMINING THE EFFECT OF OVERBAKING ON ORGANIC COATINGS |
DIN EN ISO 19712-3:2013-09
|
PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007) |
ASTM F 1945 : 2005 : R2011
|
Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting (Withdrawn 2020) |
I.S. EN 15886:2010
|
CONSERVATION OF CULTURAL PROPERTY - TEST METHODS - COLOUR MEASUREMENT OF SURFACES |
ISO/TR 15922:2011
|
Metallic and other inorganic coatings Evaluation of properties of dark-stain phenomenon of chromated coiled or sheet product |
UNE-EN ISO 19712-3:2013
|
Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007) |
SAE J 2527 : 2017
|
PERFORMANCE BASED STANDARD FOR ACCELERATED EXPOSURE OF AUTOMOTIVE EXTERIOR MATERIALS USING A CONTROLLED IRRADIANCE XENON-ARC APPARATUS |
ASTM C 1376 : 2015 : REDLINE
|
Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
I.S. EN ISO 19712-2:2013
|
PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS (ISO 19712-2:2007) |
ASTM D 2932 : 1980 : R1988 : EDT 1
|
Guide for Testing Exterior Solvent-Based House and Trim Coatings (Withdrawn 1993) |
ASTM D 3089 : 1997 : R2008
|
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM D 2985/D2985M : 1992 : R2011 : EDT 1
|
Standard Test Method for Color of Asbestos |
ASTM E 1349 : 2006 : R2013
|
Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
ASTM D 7445 : 2018 : REDLINE
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding) |
ASTM F 2037 : 2000 : R2011
|
Standard Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions in Typical Office Environments (Withdrawn 2020) |
ASTM E 1420 : 1991
|
Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996) |
ASTM D 5326 : 1994 : REV A
|
Standard Test Method for Color Development in Tinted Latex Paints |
ASTM D 5326 : 1994 : REV A : R2002
|
Standard Test Method for Color Development in Tinted Latex Paints |
ASTM D 2066 : 2007 : R2012
|
Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions |
ASTM E 1247 : 2012 : R2017
|
Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry |
ASTM D 5215 : 1993 : R2005
|
Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives |
ASTM G 201 : 2016 : REDLINE
|
Standard Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation |
ASTM D 4674 : 2002 : REV A : R2010
|
Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments (Withdrawn 2019) |
ASTM D 3022 : 1984 : R1996 : EDT 1
|
Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill |
ASTM D 3322 : 1982 : R2017
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM D 5452 : 2012 : REDLINE
|
Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
ASTM D 5382 : 2002 : R2013
|
Standard Guide to Evaluation of Optical Properties of Powder Coatings |
ASTM F 1514 : 2003 : R2008
|
Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change |
ASTM D 4303 : 2010
|
Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials |
ASTM D 2205 : 2015 : REDLINE
|
Standard Guide for Selection of Tests for Traffic Paints |
ASTM D 7270 : 2007
|
Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings |
ASTM F 2957 : 2013
|
Standard Specification for Ornamental Aluminum Fence Systems |
ASTM D 387 : 2000 : R2008
|
Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller |
ASTM D 2276 : 2006
|
Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling |
ASTM D 6531 : 2000 : R2005
|
Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement |
ASTM D 2745 : 2000 : R2008
|
Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements |
PIP ELSSG12 : 2019
|
DESIGN AND FABRICATION OF OUTDOOR ENCLOSURES FOR MOTOR CONTROLLERS AND SWITCHGEAR |
PIP ELSSG12 : 2018
|
DESIGN AND FABRICATION OF OUTDOOR ENCLOSURES FOR MOTOR CONTROLLERS AND SWITCHGEAR |
PIP ELSSG12 : 2012
|
DESIGN AND FABRICATION OF OUTDOOR ENCLOSURES FOR MOTOR CONTROLLERS AND SWITCHGEAR |