ASTM D 6572 : 2013 : EDT 2
|
Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test |
ASTM D 3282 : 2015
|
Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes |
ASTM D 2940/D2940M : 2015
|
Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports |
ASTM D 7181 : 2011
|
Method for Consolidated Drained Triaxial Compression Test for Soils |
ASTM D 2487 : 2017
|
Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
ASTM D 242/D242M : 2019
|
Standard Specification for Mineral Filler for Asphalt Mixtures |
ASTM D 7277 : 2016
|
Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow |
ASTM D 2166/D2166M : 2016
|
Standard Test Method for Unconfined Compressive Strength of Cohesive Soil |
ASTM D 4221 : 2018
|
Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer |
ASTM D 1073 : 2016
|
Standard Specification for Fine Aggregate for Asphalt Paving Mixtures |
ASTM D 7928 : 2017
|
Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis |
ASTM D 2850 : 2015
|
Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils |
ASTM D 5050 : 2008 : R2015
|
Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts |
ASTM D 5101 : 2012 : R2017
|
Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
ASTM D 6088 : 2006 : R2016
|
Standard Practice for Installation of Geocomposite Pavement Drains |
ASTM D 6460 : 2012
|
Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion |
ASTM D 2216 : 2019
|
Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
ASTM D 4223/D4223M : 2012
|
Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils |
ASTM D 3999/D3999M : 2011 : EDT 1
|
Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus (Withdrawn 2020) |
ASTM D 3080/D3080M : 2011
|
Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions (Withdrawn 2020) |
ASTM D 7830/D7830M : 2014
|
Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge |
ASTM D 4767 : 2011
|
Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils |
ASTM D 6528 : 2017
|
Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils |
ASTM D 2435/D2435M : 2011
|
Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading |
ASTM D 7608 : 2018
|
Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils |
ASTM D 5084 : 2016 : REV A
|
Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter |
ASTM E 1266 : 2012
|
Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications |
ASTM D 4943 : 2018
|
Standard Test Method for Shrinkage Factors of Cohesive Soils by the Water Submersion Method |
ASTM D 4554 : 2012
|
Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities (Withdrawn 2021) |
ASTM D 3839 : 2014
|
Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe |
ASTM D 1883 : 2016
|
Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils |
ASTM D 6467 : 2013 : EDT 1
|
Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils |
ASTM E 3163 : 2018
|
Standard Guide for Selection and Application of Analytical Methods and Procedures Used during Sediment Corrective Action |
ASTM D 653 : 2014
|
Standard Terminology Relating to Soil, Rock, and Contained Fluids |
ASTM D 4186/D4186M : 2012 : EDT 1
|
Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading |
ASTM D 1241 : 2015
|
Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses (Withdrawn 2024) |
ASTM D 8151 : 2019
|
Standard Practice for Obtaining Rainfall Runoff from Unvegetated Rolled and Hydraulic Erosion Control Products (RECPs and HECPs) for Acute Ecotoxicity Testing |
ASTM D 6913/D6913M : 2017
|
Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
ASTM D 4546 : 2014 : EDT 1
|
Standard Test Methods for One-Dimensional Swell or Collapse of Soils |
ASTM D 4647/D4647M : 2013
|
Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test |
ASTM D 5106 : 2015
|
Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures |
ASTM D 4215 : 2007 : R2013
|
Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures |
ASTM F 1962 : 2011
|
Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings (Withdrawn 2020) |
ASTM D 5311/D5311M : 2013
|
Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil (Withdrawn 2022) |
ASTM E 2060 : 2006 : R2014
|
Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes |