ASTM D 4378 : 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
Available format(s)
Hardcopy , PDF
Superseded date
11-09-2020
Superseded by
Language(s)
English
Published date
01-10-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.This practice covers the requirements for the effective monitoring of mineral turbine oils in service in steam and gas turbines, as individual or combined cycle turbines, used for power generation.
| Committee |
D 02
|
| DocumentType |
Standard Practice
|
| Pages |
18
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice covers the requirements for the effective monitoring of mineral turbine oils in service in steam and gas turbines, as individual or combined cycle turbines, used for power generation. This practice includes sampling and testing schedules to validate the condition of the lubricant through its life cycle and by ensuring required improvements to bring the present condition of the lubricant within the acceptable targets. This practice is not intended for condition monitoring of lubricants for auxiliary equipment; it is recommended that the appropriate practice be consulted (see Practice D6224).
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 6971 : 2009 : R2014 | Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 8185 : 2018 | Standard Guide for In-Service Lubricant Viscosity Measurement |
| ASTM D 6810 : 2013 | Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 7720 : 2011 : R2017 | Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination |
| ASTM D 8112 : 2017 | Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid |
| ASTM D 6439 : 2011 : R2017 | Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems |
| ASTM D 7843 : 2018 | Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry |
| ASTM D 6224 : 2016 | Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
| ASTM D 7590 : 2009 : R2014 | Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry |
| ASTM D 4898 : 1990 : R2010 : EDT 1 | Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis |
| ASTM D 6439 : 2005 | Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems |
| ASTM D 4057 : 2019 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 6439 : 2011 : R2017 | Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems |
| ASTM D 4057 : 1995 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4898 : 1990 : R2010 | Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis |
| ASTM D 2273 : 1997 : R2002 : EDT 1 | Standard Test Method for Trace Sediment in Lubricating Oils |
| ASTM D 1401 : 2019 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 4898 : 2016 | Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis |
| ASTM D 7669 : 2011 | Standard Guide for Practical Lubricant Condition Data Trend Analysis |
| ASTM D 7720:2011 | Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination |
| ASTM D 7155 : 2006 | Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils |
| ASTM D 3427 : 2003 | Standard Test Method for Air Release Properties of Petroleum Oils |
| ASTM D 5185 : 1997 | Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 2668 : 2002 : EDT 1 | Standard Test Method for 2,6-<i>di-tert</i>-Butyl-<i> p</i>-Cresol and 2,6-<ital>di-tert</ital>-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption |
| ASTM D 2422 : 1997 : R2007 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| ASTM D 3427 : 2015 | Standard Test Method for Air Release Properties of Hydrocarbon Based Oils |
| ASTM D 4057 : 2012 : R2018 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 2422 : 1997 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| ASTM D 2273 : 1997 : R2002 : EDT 2 | Standard Test Method for Trace Sediment in Lubricating Oils |
| ASTM D 6304:2016 | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration |
| ASTM D 6224 : 2016 | Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
| ASTM D 1401 : 2018 : REV B | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 3427 : 2014 : REV A | Standard Test Method for Air Release Properties of Petroleum Oils |
| ASTM D 2668 : 2007 : R2013 | Standard Test Method for 2,6-<i>di-tert</i>-Butyl-<i> p</i>-Cresol and 2,6-<ital>di-tert</ital>-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption |
| ASTM D 2422 : 1997 : R2018 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| ASTM D 6971 : 2009 : R2014 | Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 6304 : 2004 : REV A : EDT 1 | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration |
| ASTM D 2273 : 1997 | Standard Test Method for Trace Sediment in Lubricating Oils |
| ASTM D 6224 : 1998 | Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
| ASTM D 1401 : 2018 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 5185 : 2005 | Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 1500 : 2004 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 1401 : 2009 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 4057 : 1981 : EDT 2 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 5185 : 2002 | Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 1401 : 1998 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 6810 : 2002 | Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in HL Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 2668 : 2007 | Standard Test Method for 2,6-<i>di-tert</i>-Butyl-<i> p</i>-Cresol and 2,6-<ital>di-tert</ital>-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption |
| ASTM D 6971 : 2009 | Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 6304 : 2007 | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration (Withdrawn 2016) |
| ASTM D 6304 : 2004 | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration |
| ASTM D 5185 : 2018 | Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 1500 : 2012 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 6810 : 2013 | Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 6304 : 2016 : EDT 1 | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration |
| ASTM D 3427 : 2002 | Standard Test Method for Air Release Properties of Petroleum Oils |
| ASTM D 5185 : 2013 : EDT 1 | Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 6304 : 2004 : REV A | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration |
| ASTM D 6439 : 2011 | Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems |
| ASTM D 6304 : 2004 : EDT 1 | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration |
| ASTM D 6224 : 2002 | Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
| ASTM D 7155 : 2011 | Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils |
| ASTM D 4057 : 2006 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 1500 : 2003 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 7647 : 2010 : R2018 | Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction |
| ASTM D 1500 : 1982 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 6304 : 2000 | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration |
| ASTM D 4057 : 2012 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 3427 : 2014 : REV A : EDT 1 | Standard Test Method for Air Release Properties of Petroleum Oils |
| ASTM D 5185 : 2013 | Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 1500 : 2002 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 7669 : 2015 | Standard Guide for Practical Lubricant Condition Data Trend Analysis |
| ASTM D 7647 : 2010 | Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction |
| ASTM D 2272 : 1998 | Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
| ASTM D 1500 : 1998 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 1500 : 2012 : R2017 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 6439 : 1999 | Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems |
| ASTM D 1401 : 2002 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 2273 : 2008 | Standard Test Method for Trace Sediment in Lubricating Oils |
| ASTM D 7155 : 2020 | Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils |
| ASTM D 2668 : 2002 | Standard Test Method for 2,6-<i>di-tert</i>-Butyl-<i> p</i>-Cresol and 2,6-<ital>di-tert</ital>-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption |
| ASTM D 4898 : 1990 : R2000 : EDT 1 | Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis |
| ASTM D 6810 : 2007 | Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 6224 : 2009 | Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
| ASTM D 2272 : 2014 : REV A | Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
| ASTM D 6304 : 2003 | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration |
| ASTM D 2668 : 1996 | Standard Test Method for 2,6-Ditertiary-Butyl Para Cresol and 2,6-Ditertiary-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption |
| ASTM D 2272 : 2009 | Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
| ASTM D 7155 : 2018 | Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils |
| ASTM D 5185 : 2009 | Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 2272 : 2014 | Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
| ASTM D 1401 : 2012 : EDT 1 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 2273 : 2008 : R2012 | Standard Test Method for Trace Sediment in Lubricating Oils |
| ASTM D 6971 : 2004 | Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 3427 : 2006 | Standard Test Method for Air Release Properties of Petroleum Oils |
| ASTM D 2422 : 1997 : R2013 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| ASTM D 2273 : 2005 | Standard Test Method for Trace Sediment in Lubricating Oils |
| ASTM D 3427 : 2007 | Standard Test Method for Air Release Properties of Petroleum Oils |
| ASTM D 5185 : 2002 : EDT 1 | Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 2272 : 2002 | Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
| ASTM D 3427 : 2019 | Standard Test Method for Air Release Properties of Hydrocarbon Based Oils |
| ASTM D 7720 : 2011 : R2017 | Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination |
| ASTM D 2422 : 1997 : R2002 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| ASTM D 5185 : 2002 : EDT 2 | Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 1401 : 2018 : REV A | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 1500 : 2004 : REV A | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 3427 : 2012 | Standard Test Method for Air Release Properties of Petroleum Oils |
| ASTM D 1500 : 2007 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 1401 : 2012 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 4057 : 1995 : R2000 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 2272 : 2011 | Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
| ASTM D 3427 : 2014 | Standard Test Method for Air Release Properties of Petroleum Oils |
| ASTM D 1401 : 2010 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 4057 : 2006 : R2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 2273 : 2008 : R2016 | Standard Test Method for Trace Sediment in Lubricating Oils (Withdrawn 2023) |
| ASTM D 3427 : 1999 | Standard Test Method for Air Release Properties of Petroleum Oils |
| ASTM D 4898 : 1990 : R2005 | Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.