ASTM D 4383 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Plowable, Raised Retroreflective Pavement Markers
Hardcopy , PDF
21-01-2022
English
11-04-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 04
|
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers a type of plowable, retroreflective, raised pavement marker for lane marking and delineation.
1.2Retroreflective markers are intended for nighttime visibility.
1.3The values stated in inch-pound units are to be regarded as the standard, except where noted in the document. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4The following precautionary caveat pertains only to the test methods portion, Section 10, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 1785 : 2015 : EDT 1 | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 |
| ASTM D 4280 : 2018 | Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers |
| ASTM D 5329 : 2016 | Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements |
| ASTM D 2669 : 2016 | Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts) |
| ASTM D 3111 : 1999 | Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method |
| ASTM D 2172 : 1995 | Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures |
| ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 1785 : 2021 | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 |
| ASTM D 1785 : 2015 | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 |
| ASTM D 1754 : 1997 | Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test) |
| ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 809 : 2008 : R2013 | Standard Practice for Measuring Photometric Characteristics of Retroreflectors |
| ASTM D 4402 : 1987 : R2000 : EDT 1 | Standard Test Method for Viscosity Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus |
| ASTM C 778 : 2017 | Standard Specification for Standard Sand |
| ASTM D 1785 : 2021 : REV A | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 |
| ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 1856 : 2021 | Standard Test Method for Recovery of Asphalt from Solution by Abson Method |
| ASTM D 4280 : 2000 | Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers |
| ASTM D 1856 : 1995 : REV A | Standard Test Method for Recovery of Asphalt From Solution by Abson Method |
| ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 2171 : 1994 | Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer |
| ASTM D 1856 : 2009 : R2015 | Standard Test Method for Recovery of Asphalt From Solution by Abson Method |
| ASTM E 809 : 2021 | Standard Practice for Measuring Photometric Characteristics of Retroreflectors |
| ASTM D 2669 : 1987 : R1999 | Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts) (Withdrawn 2004) |
| ASTM D 70 : 2018 : REV A | Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method) |
| ASTM D 5329 : 1996 | Standard Test Methods for Sealants and Fillers, Hot-Applied, For Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements |
| ASTM E 809 : 1994 : REV A : R2000 | Standard Practice for Measuring Photometric Characteristics of Retroreflectors |
| ASTM D 4280 : 2015 | Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers |
| ASTM E 811 : 1995 | Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions |
| ASTM D 1785 : 1999 | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 |
| ASTM D 5329 : 2015 | Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements |
| ASTM C 778 : 2021 | Standard Specification for Standard Sand |
| ASTM D 3111 : 2019 | Standard Practice for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.