• ASTM D 4483 : 2018

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries

    Available format(s):  Hardcopy, PDF

    Superseded date:  07-07-2020

    Language(s):  English

    Published date:  01-06-2018

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    This practice covers guidelines for evaluating precision and serves as the governing practice for interlaboratory test programs (ITP) used to evaluate precision for test methods as used in the rubber manufacturing and the carbon black industries.

    Scope - (Show below) - (Hide below)

    1.1This practice covers guidelines for evaluating precision and serves as the governing practice for interlaboratory test programs (ITP) used to evaluate precision for test methods as used in the rubber manufacturing and the carbon black industries. This practice uses the basic one way analysis of variance calculation algorithms of Practice E691. Although bias is not evaluated in this practice, it is an essential concept in understanding precision evaluation.

    1.2This practice applies to test methods that have test results expressed in terms of a quantitative continuous variable. Although exceptions may occur, it is in general limited to test methods that are fully developed and in routine use in a number of laboratories.

    1.3Two precision evaluation methods are given that are described as robust statistical procedures that attempt to eliminate or substantially decrease the influence of outliers. The first is a General Precision procedure intended for all test methods in the rubber manufacturing industry, and the second is a specific variation of the general precision procedure designated as Special Precision, that applies to carbon black testing. Both of these procedures use the same uniform level experimental design and the Mandel h and k statistics to review the precision database for potential outliers. However, they use slight modifications in the procedure for rejecting incompatible data values as outliers. The Special Precision procedure is specific as to the number of replicates per database cell or material-laboratory combination.

    1.4This practice is divided into the following sections:

    Section

    Scope

    1

    Referenced Documents

    2

    Terminology

    3

    Significance and Use

    4

    Precision Evaluation—General Precision and Special Precision

    5

    Steps in Organizing an Interlaboratory Test Program (ITP)

    6

    Overview of the General Precision Analysis Procedure

    7

    General Precision: Analysis Step 1

    8

     Preliminary Graphical Data Review

    8.1

     Calculation of Precision for Original Database

    8.2

     Detection of Outliers at 5 % Significance Level Using h and k Statistics

    8.3

     Generation of Revision 1 Database Using Outlier Treatment Option 1 or 2

    8.4

    General Precision: Analysis Step 2

    9

     Calculation of Precision for Revision 1 Database

    9.1

     Detection of Outliers at 2 % Significance Level Using h and k Statistics

    9.1

     Generation of Revision 2 Database Using Outlier Treatment Option 1 or 2

    9.1.2

    General Precision: Analysis Step 3

    10

     Calculation of Precision Using Revision 2 Database

    10.1

    Special Precision Analysis—Carbon Black Testing

    11

    Format for Precision Table and Clause in Test Method Standards

    12

    Preparation of Report for Precision Analysis

    13

    Definitions for Selected Terms Concerned with Precision and Testing

    Annex A1

    Statistical Model for Interlaboratory Testing Programs

    Annex A2

    Calculating the h and k Consistency Statistics for Outliers

    Annex A3

    Spreadsheet Calculation Formulas, Table Layout, and Calculation Sequence

    Annex A4

    Procedure for Calculating Replacement Values of Deleted Outliers

    Annex A5

    Example of General Precision Evaluation—Mooney Viscosity Testing

    Annex A6

    1.5Six annexes are presented; these serve as supplements to the main body of this practice. Annex A1 and Annex A2 are given mainly as background information that is important for a full understanding of precision evaluation. Annex A3 – Annex A5 contain detailed instructions and procedures needed to perform the operations as called for in various parts of the practice. The use of these annexes in this capacity avoids long sections of involved instruction in the main body of this practice. This allows for a better presentation and understanding of the central concepts involved in the evaluation of precision. Annex A6 is also important; it gives a complete example of precision evaluation that illustrates all of the procedures and options likely to be encountered in any precision evaluation, from the simple to the most complex.

    1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

    1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    General Product Information - (Show below) - (Hide below)

    Committee D 11
    Document Type Standard Practice
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 380 : 1994 : R2012 Standard Test Methods for Rubber Hose
    ASTM D 6049 : 2003 : R2017 Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
    ASTM D 6124 : 2006 : R2017 Standard Test Method for Residual Powder on Medical Gloves
    ASTM D 6284 : 2017 Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
    ASTM C 1187 : 2015 Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks In a Pool Environment
    ASTM D 4578 : 2006 : R2017 Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction
    ASTM D 4934 : 2002 : R2017 Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles
    ASTM D 6370 : 1999 : R2019 Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)
    ASTM D 4936 : 2010 : R2015 Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration
    ASTM D 3314 : 2002 : R2017 Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
    ASTM D 926 : 2017 Standard Test Method for Rubber Property—Plasticity and Recovery (Parallel Plate Method)
    ASTM D 7121 : 2005 : R2018 Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum
    ASTM D 1630 : 2016 Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader)
    ASTM D 3188 : 2006 : R2017 Standard Test Methods for Rubber—Evaluation of IIR (Isobutene-Isoprene Rubber)
    ASTM D 1508 : 2012 : R2017 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
    ASTM D 7427 : 2016 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex
    ASTM D 945 : 2016 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
    ASTM F 421 : 2015 Standard Test Method for Measuring Groove and Void Depth in Passenger Car Tires
    ASTM F 1806 : 2014 Standard Practice for Tire Testing Operations–Basic Concepts and Terminology for Reference Tire Use
    ASTM D 1514 : 2015 Standard Test Method for Carbon Black—Sieve Residue
    ASTM D 1513 : 2005 : R2017 Standard Test Method for Carbon Black, Pelleted—Pour Density
    ASTM D 5051 : 2006 : R2017 Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay
    ASTM D 3484 : 2006 : R2016 Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)
    ASTM D 5774 : 1995 : R2019 Standard Test Methods for Rubber—Chemical Analysis of Extractables
    ASTM D 4574 : 2006 : R2017 Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content
    ASTM D 1510 : 2019 Standard Test Method for Carbon Black—Iodine Adsorption Number
    ASTM D 4678 : 2015 : REV A Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
    ASTM D 5376 : 2006 : R2017 Standard Test Method for Rubber Compounding Materials—Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ
    ASTM D 3848 : 2003 : R2018 Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black
    ASTM D 750 : 2012 : R2017 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus
    ASTM D 2084 : 2019 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
    ASTM D 4986 : 2018 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
    ASTM D 5666 : 1995 : R2019 Standard Test Method for Rubber Chemical Antidegradants—Purity of p-Phenylenediamine (PPD) Antidegradants by High Performance Liquid Chromatography
    ASTM D 6845 : 2018 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
    ASTM D 2228 : 2004 : R2015 Standard Test Method for Rubber Property—Relative Abrasion Resistance by Pico Abrader Method
    ASTM D 1991 : 2015 Standard Test Method for Rubber Chemicals—2-Mercaptobenzothiazole (MBT)—Assay
    ASTM D 3568 : 2003 : R2018 Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil
    ASTM D 2240 : 2015 : EDT 1 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM D 5964 : 2016 Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil
    ASTM D 2632 : 2015 Standard Test Method for Rubber Property—Resilience by Vertical Rebound
    ASTM F 1957 : 1999 : R2017 Standard Test Method for Composite Foam Hardness-Durometer Hardness
    ASTM D 1414 : 2015 Standard Test Methods for Rubber O-Rings
    ASTM D 6515 : 2000 : R2016 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
    ASTM D 7662 : 2015 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
    ASTM D 5668 : 2009 : R2014 Standard Test Methods for Rubber From Synthetic Sources—Volatile Matter
    ASTM D 5902 : 2005 : R2015 Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
    ASTM D 471 : 2016 : REV A Standard Test Method for Rubber Property—Effect of Liquids
    ASTM D 6499 : 2018 Standard Test Method for Immunological Measurement of Antigenic Protein in Hevea Natural Rubber (HNR) and its Products
    ASTM D 1415 : 2018 Standard Test Method for Rubber Property—International Hardness
    ASTM D 7724 : 2018 Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM)
    ASTM F 623 : 2019 Standard Performance Specification for Foley Catheter
    ASTM D 1917 : 2003 : R2017 Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR)
    ASTM D 6281 : 2015 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
    ASTM D 3900 : 2017 Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
    ASTM D 7605 : 2011 : R2016 Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
    ASTM D 6204 : 2019 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
    ASTM D 1937 : 2018 Standard Test Method for Carbon Black, Pelleted—Mass Strength
    ASTM D 5963 : 2004 : R2015 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
    ASTM D 1646 : 2019 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
    ASTM D 3191 : 2010 : R2014 Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures
    ASTM D 7854 : 2018 : REV C Standard Test Method for Carbon Black-Void Volume at Mean Pressure
    ASTM D 1618 : 2018 Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract
    ASTM D 1619 : 2016 : REV A Standard Test Methods for Carbon Black—Sulfur Content
    ASTM D 4571 : 2006 : R2017 Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material
    ASTM D 623 : 2007 : R2014 Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression
    ASTM D 7558 : 2009 : R2019 Standard Test Method for Colorimetric/Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate, Thiuram, and Mercaptobenzothiazole Accelerators in Natural Rubber Latex and Nitrile Gloves
    ASTM F 414 : 2015 Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger
    ASTM D 3187 : 2006 : R2016 Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
    ASTM D 624 : 2000 : R2012 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
    ASTM D 6924 : 2003 : R2017 Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
    ASTM D 6600 : 2000 : R2017 Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods
    ASTM D 3192 : 2009 : R2019 Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)
    ASTM D 4937 : 1996 : R2017 Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography
    ASTM D 378 : 2010 : R2016 Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type
    ASTM D 5044 : 2006 : R2017 Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)
    ASTM D 3493 : 2018 : REV A Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
    ASTM D 3265 : 2019 Standard Test Method for Carbon Black—Tint Strength
    ASTM D 2632 : 2015 : R2019 Standard Test Method for Rubber Property—Resilience by Vertical Rebound
    ASTM D 572 : 2004 : R2019 Standard Test Method for Rubber—Deterioration by Heat and Oxygen
    ASTM D 6147 : 1997 : R2020 Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression
    ASTM D 7772 : 2015 : R2019 Standard Test Method for Carbon Black Extractables – Absorbance of Cyclohexane Extract
    ASTM D 297 : 2015 : R2019 Standard Test Methods for Rubber Products—Chemical Analysis
    ASTM D 3265 : 2019 : REV B Standard Test Method for Carbon Black—Tint Strength
    ASTM D 2137 : 2011 : R2018 Standard Test Methods for Rubber Property—Brittleness Point of Flexible Polymers and Coated Fabrics
    ASTM D 991 : 1989 : R2020 Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products
    ASTM D 5963 : 2004 : R2019 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
    ASTM D 6739 : 2020 Standard Test Method for Silica—pH Value
    ASTM D 6204 : 2019 : REV A Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
    ASTM D 623 : 2007 : R2019 Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression
    ASTM D 3493 : 2019 : REV A Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
    ASTM D 2084 : 2019 : REV A Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
    ASTM D 6556 : 2019 : REV A Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption
    ASTM D 813 : 2007 : R2019 Standard Test Method for Rubber Deterioration—Crack Growth
    ASTM D 4986 : 2020 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
    ASTM D 454 : 2004 : R2019 Standard Test Method for Rubber Deterioration by Heat and Air Pressure
    ASTM D 624 : 2000 : R2020 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
    ASTM D 5289 : 2019 : REV A Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
    ASTM D 2228 : 2004 : R2019 Standard Test Method for Rubber Property—Relative Abrasion Resistance by Pico Abrader Method
    ASTM D 531 : 2015 : R2019 Standard Test Method for Rubber Property—Pusey and Jones Indentation
    ASTM D 5902 : 2005 : R2019 Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
    ASTM D 1510 : 2019 : REV A Standard Test Method for Carbon Black—Iodine Adsorption Number
    ASTM D 5668 : 2019 Standard Test Methods for Rubber From Synthetic Sources—Volatile Matter
    ASTM D 380 : 1994 : R2020 Standard Test Methods for Rubber Hose
    ASTM D 573 : 2004 : R2019 Standard Test Method for Rubber—Deterioration in an Air Oven
    ASTM D 4678 : 2015 : REV A : R2019 Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
    ASTM D 2414 : 2019 Standard Test Method for Carbon Black—Oil Absorption Number (OAN)
    ASTM D 1229 : 2003 : R2019 Standard Test Method for Rubber Property—Compression Set at Low Temperatures
    ASTM D 1991 : 2015 : R2019 Standard Test Method for Rubber Chemicals—2-Mercaptobenzothiazole (MBT)—Assay
    ASTM D 4936 : 2010 : R2019 Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration
    ASTM D 3616 : 1995 : R2019 Standard Test Method for Rubber—Determination of Gel, Swelling Index, and Dilute Solution Viscosity
    ASTM D 5230 : 2014 : EDT 1 Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
    ASTM D 7679 : 2016 Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils
    ASTM D 6085 : 1997 : R2016 Standard Practice for Sampling in Rubber Testing—Terminology and Basic Concepts
    ASTM D 5297 : 1995 : R2019 Standard Test Methods for Rubber Chemical Accelerator—Purity by High Performance Liquid Chromatography
    ASTM D 412 : 2016 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
    ASTM D 573 : 2004 : R2015 Standard Test Method for Rubber—Deterioration in an Air Oven
    ASTM D 1417 : 2016 Standard Test Methods for Rubber Latices—Synthetic
    ASTM D 1506 : 2015 Standard Test Methods for Carbon Black—Ash Content
    ASTM D 3346 : 2017 Standard Test Methods for Rubber Property—Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)
    ASTM D 6915 : 2017 : EDT 1 Standard Practice for Carbon Black—Evaluation of Standard Reference Blacks
    ASTM D 2414 : 2018 : REV A Standard Test Method for Carbon Black—Oil Absorption Number (OAN)
    ASTM D 4026 : 2006 : R2017 Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
    ASTM D 4572 : 1989 : R2017 Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur
    ASTM D 3958 : 2006 : R2016 Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber)
    ASTM D 2663 : 2014 : R2019 Standard Test Methods for Carbon Black—Dispersion in Rubber
    ASTM D 297 : 2015 Standard Test Methods for Rubber Products—Chemical Analysis
    ASTM D 572 : 2004 : R2015 Standard Test Method for Rubber—Deterioration by Heat and Oxygen
    ASTM D 6601 : 2019 Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
    ASTM D 7771 : 2017 : REV A Standard Test Method for Determination of Benzo-α-Pyrene (BaP) Content in Carbon Black
    ASTM D 1229 : 2003 : R2015 Standard Test Method for Rubber Property—Compression Set at Low Temperatures
    ASTM D 1076 : 2015 Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
    ASTM D 531 : 2015 Standard Test Method for Rubber Property—Pusey and Jones Indentation
    ASTM D 1278 : 1991 : REV A : R2015 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis
    ASTM D 395 : 2018 Standard Test Methods for Rubber Property—Compression Set
    ASTM D 4569 : 2006 : R2017 Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur
    ASTM D 4482 : 2011 : R2017 Standard Test Method for Rubber Property—Extension Cycling Fatigue
    ASTM D 454 : 2004 : R2015 Standard Test Method for Rubber Deterioration by Heat and Air Pressure
    ASTM D 6556 : 2019 Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption
    ASTM D 3492 : 2016 Standard Specification for Rubber Contraceptives (Male Condoms)
    ASTM D 3186 : 2007 : R2016 Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil
    ASTM D 7772 : 2015 Standard Test Method for Carbon Black Extractables – Absorbance of Cyclohexane Extract
    ASTM D 813 : 2007 : R2014 Standard Test Method for Rubber Deterioration—Crack Growth
    ASTM D 6047 : 2017 Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
    ASTM D 4527 : 2018 Standard Test Method for Carbon Black—Solvent Extractables
    ASTM D 751 : 2019 Standard Test Methods for Coated Fabrics
    ASTM D 5099 : 2008 : R2017 Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry
    ASTM D 5712 : 2015 Standard Test Method for Analysis of Aqueous Extractable Protein in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method
    ASTM D 6147 : 1997 : R2014 Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression
    ASTM D 1511 : 2012 : R2017 Standard Test Method for Carbon Black—Pellet Size Distribution
    ASTM D 4573 : 2003 : R2018 Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur
    ASTM D 5289 : 2019 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
    ASTM D 3185 : 2006 : R2016 Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil
    ASTM D 3189 : 2006 : R2016 Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber)
    ASTM D 1329 : 2016 Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)
    ASTM D 1509 : 2018 Standard Test Methods for Carbon Black—Heating Loss
    ASTM D 4004 : 2006 : R2017 Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis
    ASTM D 991 : 1989 : R2014 Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products
    ASTM D 5670 : 1995 : R2019 Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
    ASTM D 3190 : 2006 : R2016 Standard Test Method for Rubber—Evaluation of Chloroprene Rubber (CR)
    ASTM D 3403 : 2007 : R2016 Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)
    ASTM D 5775 : 1995 : R2019 Standard Test Method for Rubber—Determination of Bound Styrene in Styrene Butadiene Rubber by Refractive Index
    ASTM D 6746 : 2015 Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds
    ASTM D 4075 : 2006 : R2017 Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals
    ASTM D 1512 : 2015 : REV B Standard Test Methods for Carbon Black—pH Value

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 1646 : 2000 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
    ASTM D 6600 : 2000 : EDT 2 Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods
    ASTM D 6600 : 2000 : R2009 Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods
    ASTM D 1646 : 2004 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
    ASTM D 6600 : 2000 Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods
    ASTM D 1646 : 1981 Standard Test Method for Rubber - Viscosity And Vulcanization Characteristics ( Mooney Viscometer)
    ASTM D 1646 : 2019 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
    ASTM D 6600 : 2000 : R2004 Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods
    ASTM D 1646 : 2003 : REV A Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
    ASTM D 6600 : 2000 : R2013 Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods
    ASTM D 1646 : 2015 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
    ASTM D 1646 : 2003 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
    ASTM D 1646 : 2006 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
    ASTM D 1646 : 2007 : R2012 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
    ASTM D 6600 : 2000 : EDT 1 Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods
    ASTM D 1646 : 2007 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
    ASTM D 1646 : 2017 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
    ASTM D 1646 : 1992 Standard Test Method for RubberÐViscosity and Vulcanization Characteristics (Mooney Viscometer)
    ASTM D 6600 : 2000 : R2017 Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective