ASTM D 454 : 2004 : R2015

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Standard Test Method for Rubber Deterioration by Heat and Air Pressure

Available format(s): Hardcopy, PDF

Superseded date: 18-02-2020

Language(s): English

Published date: 02-10-2015

Publisher: American Society for Testing and Materials

Abstract - (Show below) - (Hide below)

CONTAINED IN VOL. 09.01, 2015 Outlines a procedure to determine the influence of elevated temperature and air pressure on the physical properties of vulcanized rubber.

Scope - (Show below) - (Hide below)

1.1This test method covers a procedure to determine the influence of elevated temperature and air pressure on the physical properties of vulcanized rubber. The results of this test may not give an exact correlation with service performance since performance conditions vary widely. The test may, however, be used to evaluate rubber compounds on a laboratory comparison basis. It will be most applicable to performance under conditions of increased temperature and air pressure.

Note 1:For evaluating rubber vulcanizates under less severe conditions that more nearly approach natural aging, the use of Test Methods D573 and D865 is recommended.

1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Product Information - (Show below) - (Hide below)

Committee	D 11
Document Type	Test Method
ISBN
Pages
Product Note	Reconfirmed 2015
Published
Publisher	American Society for Testing and Materials
Status	Superseded
Superseded By	ASTM D 454 : 2004 : R2019
Supersedes	ASTM D 454 : 2004 : R2010

Standards Referencing This Book - (Show below) - (Hide below)

ASTM D 3182 : 2015	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3183 : 2010	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 3182 : 2007 : R2012	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 4483 : 1999	Standard Practice for Determining Precision for Test Method Standards in the Rubber and Carbon Black Industries
ASTM D 4483 : 2005 : REV A	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 3182 : 1989 : R2006	Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3183 : 2009	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 3183 : 201	PRACTICE FOR RUBBER - PREPARATION OF PIECES FOR TEST PURPOSES FROM PRODUCTS
ASTM D 3182 : 1989 : R2001 : EDT 1	Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3183 : 2010 : R2015	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 3183 : 2007	Standard Practice for Rubber—Preparation of Product Pieces for Test Purposes from Products
ASTM D 3182 : 2007	Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3182 : 2016 : REDLINE	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 865 : 2011	Standard Test Method for RubberDeterioration by Heating in Air (Test Tube Enclosure)
ASTM D 3183 : 1984 : R1998	Standard Practice for Rubber-Preparation of Pieces for Test Purposes from Products
ASTM D 4483 : 2005	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 3182 : 1989 : R2001	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 4483 : 2014 : REV A	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 4483 : 2014	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 4483 : 2018	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 4483 : 2005 : REV A : R2011	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 3182 : 1989 : R1994	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 4483 : 2014-02	PRACTICE FOR EVALUATING PRECISION FOR TEST METHOD STANDARDS IN THE RUBBER AND CARBON BLACK MANUFACTURING INDUSTRIES
ASTM D 3182 : 2016	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3183 : 2002	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 3182 : 2015 : REV A	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account

Committee	D 11
Document Type	Test Method
ISBN
Pages
Product Note	Reconfirmed 2015
Published
Publisher	American Society for Testing and Materials
Status	Superseded
Superseded By	ASTM D 454 : 2004 : R2019
Supersedes	ASTM D 454 : 2004 : R2010

Standards Referencing This Book - (Show below) - (Hide below)

ASTM D 3182 : 2015	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3183 : 2010	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 3182 : 2007 : R2012	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 4483 : 1999	Standard Practice for Determining Precision for Test Method Standards in the Rubber and Carbon Black Industries
ASTM D 4483 : 2005 : REV A	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 3182 : 1989 : R2006	Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3183 : 2009	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 3183 : 201	PRACTICE FOR RUBBER - PREPARATION OF PIECES FOR TEST PURPOSES FROM PRODUCTS
ASTM D 3182 : 1989 : R2001 : EDT 1	Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3183 : 2010 : R2015	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 3183 : 2007	Standard Practice for Rubber—Preparation of Product Pieces for Test Purposes from Products
ASTM D 3182 : 2007	Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3182 : 2016 : REDLINE	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 865 : 2011	Standard Test Method for RubberDeterioration by Heating in Air (Test Tube Enclosure)
ASTM D 3183 : 1984 : R1998	Standard Practice for Rubber-Preparation of Pieces for Test Purposes from Products
ASTM D 4483 : 2005	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 3182 : 1989 : R2001	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 4483 : 2014 : REV A	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 4483 : 2014	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 4483 : 2018	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 4483 : 2005 : REV A : R2011	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 3182 : 1989 : R1994	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 4483 : 2014-02	PRACTICE FOR EVALUATING PRECISION FOR TEST METHOD STANDARDS IN THE RUBBER AND CARBON BLACK MANUFACTURING INDUSTRIES
ASTM D 3182 : 2016	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3183 : 2002	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 3182 : 2015 : REV A	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

View more information

ASTM D 454 : 2004 : R2015

Add To Cart

Access your standards online with a subscription