ASTM D 5025 : 2012 : EDT 1
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
Available format(s)
Hardcopy , PDF
Superseded date
25-03-2020
Superseded by
Language(s)
English
Published date
01-08-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 20
|
| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers the physical dimensions and characteristics of a laboratory burner to be used as an ignition source for small-scale burning tests on plastic materials. The burner is used with methane, propane, or butane supply gases for flame heights of 20 to 125 mm.
1.2Fire testing of products and materials is inherently hazardous, and adequate safeguards for personnel and property shall be employed in conducting these tests.
1.3The burner described in this specification is suitable for use in the following ASTM standards: Specification C509, Test Method D229, Test Method D635, Test Method D876, Test Method D3014, Test Method D3801, Test Method D4804, Test Method D4986, and Test Method D5048. Safety hazards and known limitations on applicability of fire-test-response standards are addressed in the individual test methods.
Note 1:This specification is equivalent to the ignition source specified in IEC 60695-11-3, Annex A and IEC 60695-11-4, Annex A.
Note 2:This specification is equivalent to the P/PF2 ignition source specified in ISO 10093.
| ASTM D 5207 : 2014 | Standard Practice for Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials |
| ASTM D 4804 : 2019 | Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics |
| ASTM D 2633 : 2013 : REV A | Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable |
| ASTM D 5132 : 2017 | Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles |
| ASTM E 3020 : 2016 : REV A | Standard Practice for Ignition Sources |
| ASTM F 1955 : 2015 | Standard Test Method for Flammability of Sleeping Bags |
| ASTM F 1505 : 2016 | Standard Specification for Insulated and Insulating Hand Tools |
| ASTM D 4986 : 2018 | Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials |
| ASTM F 2456 : 2019 : REV A | Standard Specification for Youth-Resistant Firearms Containers (YRFCs) |
| ASTM D 3014 : 2019 : REV A | Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position |
| ASTM D 470 : 2013 | Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable |
| ASTM D 3801 : 2019 | Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position |
| ASTM D 635 : 2018 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
| ASTM E 3082 : 2017 : EDT 1 | Standard Test Methods for Determining the Effectiveness of Fire Retardant Treatments for Natural Christmas Trees |
| ASTM D 4804 : 2020 | Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics |
| ASTM D 4986 : 2020 | Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials |
| ASTM D 5048 : 2020 | Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame |
| ASTM D 5132 : 2020 | Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles |
| ASTM D 3801 : 2020 | Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position |
| ASTM D 1600 : 1999 | Standard Terminology for Abbreviated Terms Relating to Plastics |
| ASTM D 4986 : 1998 | Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials |
| ASTM D 3014 : 2018 | Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position |
| ASTM D 3801 : 2006 | Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position |
| ASTM D 3014 : 2004 : REV A | Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position |
| ASTM D 5207 : 2014 | Standard Practice for Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials |
| ASTM D 5048 : 2009 | Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame |
| ASTM D 5207 : 2009 | Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials |
| ASTM D 3801 : 2000 | Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position |
| ASTM D 3801 : 2010 | Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position |
| ASTM D 1600 : 2007 | Standard Terminology for Abbreviated Terms Relating to Plastics |
| ASTM D 1600 : 2013 | Standard Terminology for Abbreviated Terms Relating to Plastics |
| ASTM D 3801 : 2019 | Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position |
| ASTM D 1600 : 2014 | Standard Terminology for Abbreviated Terms Relating to Plastics |
| ASTM D 1600 : 2008 | Standard Terminology for Abbreviated Terms Relating to Plastics |
| ASTM D 5207 : 1998 | Standard Practice for Calibration of 20 and 125 mm Test Flames for Small-Scale Burning Tests on Plastic Materials |
| ASTM D 4804 : 2019 : REV A | Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics |
| ASTM D 4986 : 2010 | Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials |
| ASTM D 3801 : 2019 : REV A | Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position |
| ASTM D 5048 : 2003 | Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame |
| ASTM D 3014 : 2019 : REV A | Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position |
| ASTM D 4986 : 2003 | Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials |
| ASTM D 4986 : 2018 | Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials |
| ASTM D 4804 : 2019 | Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics |
| ASTM D 1600 : 2018 | Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024) |
| ASTM D 5207 : 2003 | Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials |
| ASTM D 4804 : 2003 | Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics |
| ASTM D 5048 : 2014 | Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame |
| ASTM D 3014 : 2011 | Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position |
| ASTM D 3801 : 1996 : EDT 1 | Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position |
| ASTM D 4804 : 1998 | Standard Test Methods for Determining the Flammability Characteristics of Nonrigid Solid Plastics |
| ASTM D 4804 : 2014 | Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics |
| ASTM D 5048 : 2019 | Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame |
| ASTM D 4804 : 2009 | Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics |
| ASTM D 3014 : 1999 | Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position |
| ASTM D 3014 : 2019 | Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position |
| ASTM D 3014 : 2004 | Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position |
| ASTM D 5048 : 1997 | Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.