ASTM D 5261 : 2010 : R2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Measuring Mass per Unit Area of Geotextiles
Hardcopy , PDF
12-11-2024
English
01-07-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 35
|
| DocumentType |
Test Method
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers and can be used as an index to the determination of mass per unit area of all geotextiles.
1.2The values stated in SI units or other units shall be regarded separately as standard. The values stated in parentheses are provided for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 6455 : 2011 : R2018 | Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGMs) |
| ASTM D 6685 : 2001 : R2015 | Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC) (Withdrawn 2024) |
| ASTM D 7406 : 2007 : R2012 | Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products |
| ASTM D 7178 : 2016 : EDT 1 | Standard Practice for Determining the Number of Constrictions “<emph type="bdit" >m</emph>” of Non-Woven Geotextiles as a Complementary Filtration Property |
| ASTM D 2643/D2643M : 2008 : R2019 | Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type) |
| ASTM D 6389 : 2017 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids |
| ASTM D 6475 : 2017 | Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets |
| ASTM D 5514/D5514M : 2018 | Standard Test Method for Large-Scale Hydrostatic Puncture Testing of Geosynthetics |
| ASTM D 5889/D5889M : 2018 | Standard Practice for Quality Control of Geosynthetic Clay Liners |
| ASTM D 8102 : 2017 | Standard Practice for Manufacturing Quality Control of Geotextiles |
| ASTM D 5889/D5889M : 2018 : R2022 | Standard Practice for Quality Control of Geosynthetic Clay Liners |
| ASTM D 2643/D2643M : 2021 | Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type) |
| ASTM D 7239 : 2013 : R2023 | Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications |
| ASTM D 7406 : 2020 | Standard Test Method for Time-Dependent Compressive Deformation Under Constant Pressure for Geosynthetic Drainage Products |
| ASTM D 6389 : 2023 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids |
| ASTM D 7351/D7351M : 2021 | Standard Test Method for Determination of Sediment Retention Device (SRD) Effectiveness in Sheet Flow Applications |
| ASTM D 7178 : 2022 | Standard Practice for Determining the Number of Constrictions “<emph type="ital" >m</emph>” of Non-Woven Geotextiles |
| ASTM D 5514/D5514M : 2024 | Standard Test Methods for Large-Scale Hydrostatic Puncture Testing of Geosynthetics |
| ASTM D 4439 : 2020 | Standard Terminology for Geosynthetics |
| ASTM D 4439 : 2015 | Standard Terminology for Geosynthetics |
| ASTM D 1776/D1776M : 2020 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 4439 : 2015 : REV A | Standard Terminology for Geosynthetics |
| ASTM D 123 : 2019 | Standard Terminology Relating to Textiles |
| ASTM D 4439 : 2024 : REV A | Standard Terminology for Geosynthetics |
| ASTM D 4439 : 2017 | Standard Terminology for Geosynthetics |
| ASTM D 4439 : 2024 : EDT 1 | Standard Terminology for Geosynthetics |
| ASTM D 4439 : 2024 | Standard Terminology for Geosynthetics |
| ASTM D 1776/D1776M : 2020 : R2024 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 4439 : 2023 : REV A | Standard Terminology for Geosynthetics |
| ASTM D 4439 : 2023 : REV B | Standard Terminology for Geosynthetics |
| ASTM D 4354 : 1999 | Standard Practice for Sampling of Geosynthetics for Testing |
| ASTM D 123 : 2023 | Standard Terminology Relating to Textiles |
| ASTM D 4439 : 2000 | Standard Terminology for Geosynthetics |
| ASTM D 123 : 2001 | Standard Terminology Relating to Textiles |
| ASTM D 4439 : 2018 | Standard Terminology for Geosynthetics |
| ASTM D 4439 : 2023 | Standard Terminology for Geosynthetics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.