ASTM D 5289 : 2019 : REV A
Current
The latest, up-to-date edition.
Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
Hardcopy , PDF
English
01-11-2019
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 11
|
| DocumentType |
Test Method
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This test method covers a method for the measurement of selected vulcanization characteristics of rubber compounds using unsealed and sealed torsion shear cure meters. The two types of instruments may not give the same results.
Note 1:An alternative method for the measurement of vulcanization characteristics is given in Test Method D2084.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 3182 : 2016 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 3568 : 2003 : R2018 | Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil |
| ASTM D 3848 : 2003 : R2018 | Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black |
| ASTM D 3185 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil |
| ASTM D 3186 : 2007 : R2016 | Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil |
| ASTM D 3187 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber) |
| ASTM D 3188 : 2006 : R2017 | Standard Test Methods for Rubber—Evaluation of IIR (Isobutene-Isoprene Rubber) |
| ASTM D 3189 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber) |
| ASTM D 3190 : 2006 : R2016 | Standard Test Method for Rubber—Evaluation of Chloroprene Rubber (CR) |
| ASTM D 3191 : 2010 : R2014 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures |
| ASTM D 3403 : 2007 : R2016 | Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber) |
| ASTM D 3484 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber) |
| ASTM D 3958 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber) |
| ASTM D 4620 : 2002 : R2017 | Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber |
| ASTM D 5900 : 2017 : EDT 1 | Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM) |
| ASTM D 6601 : 2019 | Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer |
| ASTM D 6204 : 2019 | Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers |
| ASTM D 1566 : 2021 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 2084 : 2019 | Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter |
| ASTM D 1349 : 2014 : R2019 | Standard Practice for Rubber—Standard Conditions for Testing |
| ASTM D 4483 : 2020 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 1566 : 2021 | Standard Terminology Relating to Rubber |
| ASTM D 2084 : 2019 : REV A | Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter |
| ASTM D 1349 : 2014 : R2024 | Standard Practice for Rubber—Standard Conditions for Testing |
| ASTM D 4483 : 2018 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 1566 : 2020 | Standard Terminology Relating to Rubber |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.