ASTM D 5324 : 2016 : R2022
Current
The latest, up-to-date edition.
Standard Guide for Testing Water-Borne Architectural Coatings
Hardcopy , PDF
English
20-12-2022
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 01
|
| DocumentType |
Guide
|
| Pages |
12
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This guide covers the selection and use of procedures for testing water-borne coatings to be used on exterior, interior or both types of surfaces (Note 1). The properties that can be examined or, in some cases, the relevant test procedures are listed in Table 1 and Table 2.
Note 1:The term “architectural coating” as used here combines the definition in Terminology D16 with that in the FSCT Paint/Coatings Dictionary, 2 as follows: “Organic coatings intended for on-site application to interior or exterior surfaces of residential, commercial, institutional, or industrial buildings, in contrast to industrial coatings. They are protective and decorative finishes applied at ambient temperatures. Often called Trade Sales Coatings.”
Note 2:Architectural coatings that are designed to give better performance than most conventional coatings because they are tougher and more stain and abrasion resistant are covered by Guide D3730.
1.2The types of organic coatings covered by this guide are as follows:
(1)Type 1 Interior Latex Flat Wall Paints,
(2)Type 2 Exterior Latex House Paints,
(3)Type 3 Water-Borne Floor Paints, and
(4)Type 4 Interior Latex Semigloss and Gloss Paints.
1.2.1Each is intended for application by brushing, rolling, spraying or other means to the material appropriate for its type, which may include plaster, masonry, wallboard, wood, steel, previously painted surfaces, and other architectural substrates.
1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM G 195 : 2022 | Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser |
| ASTM D 6577 : 2015 : R2019 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 3456 : 2018 | Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack |
| ASTM D 185 : 2007 : R2019 | Standard Test Methods for Coarse Particles in Pigments |
| ASTM D 7306 : 2007 : R2017 | Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation |
| ASTM D 2064 : 1991 : R2016 | Standard Test Method for Print Resistance of Architectural Paints |
| ASTM D 772 : 2018 | Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints |
| ASTM D 4958 : 2024 | Standard Test Method for Comparison of the Brush Drag of Latex Paints |
| ASTM D 4062 : 2024 | Standard Test Method for Leveling of Paints by Draw-Down Method |
| ASTM D 4213 : 2008 : R2016 | Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
| ASTM D 2244 : 2023 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 772 : 2024 | Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints |
| ASTM D 7514 : 2014 : R2022 | Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment |
| ASTM D 2805 : 2011 : R2018 | Standard Test Method for Hiding Power of Paints by Reflectometry |
| ASTM D 7190 : 2010 : R2015 | Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films |
| ASTM D 4062 : 2011 : R2016 | Standard Test Method for Leveling of Paints by Draw-Down Method |
| ASTM D 1554 : 2010 : R2023 | Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials |
| ASTM D 1296 : 2001 : R2012 | Standard Test Method for Odor of Volatile Solvents and Diluents (Withdrawn 2021) |
| ASTM E 70 : 2019 | Standard Test Method for pH of Aqueous Solutions With the Glass Electrode |
| ASTM D 185 : 2007 : R2023 | Standard Test Methods for Coarse Particles in Pigments |
| ASTM D 16 : 2019 | Standard Terminology for Paint, Related Coatings, Materials, and Applications |
| ASTM D 5150 : 2024 | Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
| ASTM D 7190 : 2010 : R2023 | Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films<!--Missing unit for values in fn 3 - KF (10/23/23)--><?Pub Caret -1?> |
| ASTM D 5150 : 1992 : R2017 | Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
| ASTM D 2369 : 2020 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 3359 : 2022 | Standard Test Methods for Rating Adhesion by Tape Test |
| ASTM D 4214 : 2023 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films |
| ASTM D 1296 : 2023 | Standard Test Method for Odor of Volatile Solvents and Diluents |
| ASTM D 562 : 2010 : R2018 | Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer |
| ASTM D 4287 : 2000 : R2019 | Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer |
| ASTM D 2574 : 2016 : R2020 : EDT 1 | Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms |
| ASTM D 16 : 2024 | Standard Terminology for Paint, Related Coatings, Materials, and Applications |
| ASTM D 4214 : 2007 : R2015 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films |
| ASTM D 2369 : 2024 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 4958 : 2010 : R2016 | Standard Test Method for Comparison of the Brush Drag of Latex Paints |
| ASTM D 7306 : 2024 | Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation |
| ASTM D 2244 : 2022 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 1554 : 2010 : R2016 | Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials |
| ASTM D 4287 : 2000 : R2023 | Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer |
| ASTM D 3359 : 2023 | Standard Test Methods for Rating Adhesion by Tape Test |
| ASTM D 4213 : 2024 | Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
| ASTM D 2805 : 2011 : R2023 | Standard Test Method for Hiding Power of Paints by Reflectometry |
| ASTM D 562 : 2010 : R2023 | Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer |
| ASTM D 7514 : 2014 | Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment |
| ASTM D 2574 : 2016 : R2024 | Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms |
| ASTM D 3456 : 2024 | Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack |
| ASTM D 2064 : 2024 | Standard Test Method for Print Resistance of Architectural Paints |
| ASTM E 70 : 2024 | Standard Test Method for pH of Aqueous Solutions With the Glass Electrode |
| ASTM D 16 : 2023 | Standard Terminology for Paint, Related Coatings, Materials, and Applications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.