ASTM D 562 : 2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
01-07-2010
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 06.01, 2017 Describes the measurement of Krebs Unit (KU) viscosity to evaluate the consistency of paints and related coatings using the Stormer-type viscometer.
| Committee |
D 01
|
| DocumentType |
Test Method
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This test method covers the measurement of Krebs Unit (KU) viscosity to evaluate the consistency of paints and related coatings using the Stormer-type viscometer.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Standards | Relationship |
| UNE 48076:1992 | Identical |
| UNE 104281-5-6:1987 | Identical |
| MIL P 52977 : 0 | PRIMER COATING, ALKYD, ANTICORROSIVE, LEAD AND CHROMATE FREE |
| MIL-PRF-24596 Revision B:2009 | COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT |
| A-A-3127 Base Document:1998 | COATING SYSTEM: ALUMINUM EPOXY MASTIC FOR MINIMALLY PREPARED ATMOSPHERIC STEEL |
| ASTM D 6083 : 2005 : EDT 1 | Standard Specification for Liquid Applied Acrylic Coating Used in Roofing (Withdrawn 2014) |
| MIL-DTL-24607 Revision B:2008 | ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS |
| SSPC-PAINT 44 : 2013 | LIQUID-APPLIED ORGANIC POLYMERIC COATINGS AND LININGS FOR CONCRETE STRUCTURES IN MUNICIPAL WASTEWATER FACILITIES, PERFORMANCE-BASED |
| MIL-DTL-1115 Revision E:2010 | ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
| A-A-3161 Base Document:1998 | PRIMER COATING, CONDITIONER FOR CHALKING EXTERIOR SURFACES |
| DOD-E-1265 Revision D:1977 | ENAMEL, EXTERIOR, ALKYD, OCEAN GRAY No.17 (FORMULA No 5.0) METRIC |
| DOD-P-15328 Revision D:1978 | PRIMER (WASH), PRETREATMENT (FORMULA NO. 117 FOR METALS) (METRIC) |
| MIL-E-52891 Revision B:1988 | ENAMEL, LUSTERLESS, ZINC PHOSPHATE, STYRENATED ALKYD TYPE |
| ASTM D 2243 : 1995 | Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings |
| ASTM D 7377 : 2009 | Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet |
| DOD E 24635 : (1) | ENAMEL, GRAY, SILICONE ALKYD COPOLYMER SEMIGLOSS (FOR EXTERIOR USE) (METRIC) |
| A-A-3067 Base Document:1996 | PAINT: ALKYD, EXTERIOR, LOW VOC |
| TT-P-1952 Revision F:2015 | PAINT, TRAFFIC AND AIRFIELD MARKING, WATERBORNE |
| A-A-3132 Revision A:2003 | COATING SYSTEM: EPOXY PRIMER/URETHANE TOPCOAT FOR MINIMALLY PREPARED ATMOSPHERIC STEEL |
| A-A-3126 Base Document:1972 | COATING SYSTEM: TILE-LIKE HIGH PERFORMANCE ARCHITECTURAL |
| MIL-P-15930 Revision C:1981 | PRIMER COATING, SHIPBOARD, VINYL-ZINC CHROMATE (FORMULA NO. 120 - FOR HOT SPRAY) |
| TT-P-664 Revision D:1988 | PRIMER, COATING, ALKYD, CORROSION INHIBITING, LEAD AND CHROMATE FREE, VOC COMPLIANT |
| A-A-3121 Revision A:2004 | PAINT, RUBBER-BASE: FOR INTERIOR USE (CONCRETE AND MASONRY FLOORS) |
| DOD C 22325 : A | COLOR, TINTING, FOR INTERIOR NONFLAMING (DRY) PAINTS (METRIC) |
| A-A-3120 Base Document:1997 | PAINT: FOR SWIMMING POOLS |
| DOD P 24631 : (1) SUPP 1 | PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
| MIL-DTL-24631 Revision A:1997 | PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
| MIL-PRF-24763 Revision B:2009 | ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
| MIL A 3316 : C | ADHESIVE, FIRE RESISTANT, THERMAL INSULATION |
| ASTM D 2876 : 2000 : R2016 | Standard Test Method for Water-Soluble Matter of Vegetable-Tanned Leather |
| DOD-P-15144 Revision B:1977 | PAINT, FORMULA NO. 34 (BINDER FOR ANTI SWEAT COATINGS) (METRIC) |
| A-A-3054 Base Document:1996 | PAINT: HEAT RESISTING (204 DEGREES C) |
| MIL-DTL-700 Revision B:1998 | ENAMEL, DECK, INTERIOR, GRAY, (FORMULA NO. 20L) (METRIC) |
| ASTM D 8008 : 2015 | Standard Practice for Representative Field Sampling of Traffic Paints |
| MIL-C-46168 Revision D:1987 | COATING, ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| MIL-DTL-11414 Revision F:2013 | Primer Alkyd, Fast Dry, Corrosion Inhibiting, Lead and Chromate Free |
| MIL-L-46159 Revision A:1976 | LACQUER, ACRYLIC, LOW REFLECTIVE, OLIVE DRAB |
| MIL-DTL-24441 Revision D:2009 | PAINT, EPOXY-POLYAMIDE, GENERAL SPECIFICATION FOR |
| MIL-C-83286 Revision B:1973 | COATING URETHANE, ALIPHATIC ISOCYANATE, FOR AEROSPACE APPLICATIONS |
| ASTM D 1084 : 2016 : REDLINE | Standard Test Methods for Viscosity of Adhesives |
| TT-P-24 Revision E:1985 | PAINT, OIL (EXTERIOR CONCRETE AND MASONRY |
| A-A-3059 Base Document:1997 | PAINT: PHOTOLUMINESCENT, NONRADIOACTIVE, INTERIOR |
| MIL-PRF-32171 Revision B:2009 | DECK COATINGS, HIGH DURABILITY |
| ASTM D 211 : 1967 : R1996 : EDT 1 | Standard Specification for Chrome Yellow and Chrome Orange Pigments |
| TT-S-179 Revision B:1975 | SEALER SURFACE, PIGMENTED OIL, FOR PLASTER AND WALLBOARD |
| MIL-PRF-4556 Revision F:1998 | COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS |
| ASTM D 211 : 1967 : R2002 | Standard Specification for Chrome Yellow and Chrome Orange Pigments |
| TT-C-00542 Revision F:1995 | COATING, POLYURETHANE, OIL-FREE, MOISTURE CURING |
| TT-P-641 Revision G:1976 | PRIMER, PAINT, ZINC DUST-ZINC OXIDE (FOR GALVANIZED SURFACES) |
| ASTM D 2243 : 1995 : R2014 | Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings |
| ASTM D 6577 : 2015 : REDLINE | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 6947 : 2007 | Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System |
| ASTM F 940 : 1999 : R2013 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
| ASTM F 940:1999 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
| ASTM C 647 : 2008 | Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
| ASTM D 6083 : 2005 | Standard Specification for Liquid Applied Acrylic Coating Used in Roofing |
| TT-E-2784 Revision A:1991 | ENAMEL (ACRYLIC EMULSION, EXTERIOR GLOSS AND SEMIGLOSS) |
| TT-P-29 Revision K:1991 | PAINT, LATEX |
| TT-E-527 Revision D:1988 | ENAMEL, ALKYD, LUSTERLESS, LOW VOC CONTENT |
| DOD-E-18214 Revision B:1978 | ENAMEL, INTERIOR, DECK, DARK GREEN (FORMULA NO. 19) (METRIC) |
| MIL P 11414 : E | PRIMER COATING, LACQUER, RUST INHIBITING |
| SSPC-PAINT 38 : 2013 | SINGLE-COMPONENT MOISTURE-CURE WEATHERABLE ALIPHATIC POLYURETHANE TOPCOAT, PERFORMANCE-BASED |
| MIL P 53022 : B | PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE |
| MIL E 15090 : C | ENAMEL, EQUIPMENT, LIGHT GRAY (FORMULA NO. 111) |
| DOD E 700 : A | ENAMEL, DECK, INTERIOR, GRAY (FORMULA NO.20L) (METRIC) |
| MIL-P-24351 Revision A:1985 | PRIMER COATING, ALKYD, BLUE (FORMULA NO. 6N35-2) |
| MIL C 53039 : A | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| MIL-E-52929 Base Document:1977 | ENAMEL, ALKYD, CAMOUFLAGE, FLASH DRY |
| SSPC-PAINT 29 : 2014 | ZINC DUST PIGMENTED PRIMER, PERFORMANCE-BASED |
| TT-P-001957 Base Document:1984 | PAINT, LATEX (BACTERIOSTATIC AND FUNGISTATIC) |
| MIL-S-15191 Revision C:1986 | SILICA, DIATOMACEOUS, UNCALCINED |
| ASTM D 7377 : 2009 : R2013 | Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet |
| TT-P-47 Revision G:1984 | PAINT, OIL (NONPENETRATING - FLAT, READY-MIXED TINTS AND WHITE) |
| TT-P-001385 Base Document:1976 | PRIMER COATING, SYNTHETIC, GRAY (FOR METAL EQUIPMENT) |
| DOD-P-24555 Base Document:1977 | PAINT, ALUMINUM, HEAT-RESISTING (650 DEGREE C), LOW-EMISSIVITY (0.40 OR LESS) (METRIC) |
| MIL P 24441 : B | PAINT, EPOXY POLYAMIDE, GENERAL SPECIFICATION FOR |
| MIL P 52995 : 0 | PRIMER COATING, SYNTHETIC, CORROSION INHIBITING, LACQUER RESISTING, LEAD AND CHROMATE FREE |
| TT-P-1565 Revision B:1978 | PAINT, BOOT TOPPING BLACK |
| TT C 2114 : 0 | COATING, OBLITERATING |
| TT-E-490 Revision E:1975 | ENAMEL, SILICONE ALKYD COPOLYMER, SEMIGLOSS (FOR EXTERIOR & INTERIOR NON RESIDENTIAL USE) |
| SSPC-PAINT 24 : 2016 | LATEX EXTERIOR FINISH COAT FOR STEEL SURFACES, PERFORMANCE-BASED |
| MIL E 24635 : B | ENAMEL, SILICONE ALKYD COPOLYMER (METRIC) |
| MIL E 11195 : E | ENAMEL, LUSTERLESS, FAST DRY, VOC COMPLAINT |
| AASHTO M 300 : 2003 | SPECIFICATION FOR INORGANIC ZINC-RICH PRIMER |
| DOD-P-24655 Base Document:1985 | PAINT, UNDERWATER HULL, ANTICORROSION (METRIC) |
| DOD E 1115 : C | ENAMEL, INTERIOR, ALKYD, WHITE [FORMULA NO.30] METRIC |
| ASTM D 1849 : 1995 : R2008 | Standard Test Method for Package Stability of Paint |
| TT-L-201 Revision A:1978 | LINSEED OIL, HEAT POLYMERIZED |
| MIL-P-22298 Revision A:1985 | PAINT, BLACK, POLYISOBUTYLENE (FORMULA NO. 133) |
| MIL-PRF-26915 Revision D:1997 | PRIMER COATING, FOR STEEL SURFACES |
| TT-P-650 Revision D:1988 | PRIMER COATING, LATEX BASE, INTERIOR, WHITE (FOR GYPSUM WALLBOARD, OR PLASTER) |
| MIL-DTL-53022 Revision C Interim Revision:2007 | PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE |
| TT-E-489 Revision J:1994 | ENAMEL, ALKYD, GLOSS, (FOR EXTERIOR AND INTERIOR SURFACES) |
| ASTM D 3927 : 1987 | Guide for State and Institutional Purchasing of Paint (Withdrawn 1991) |
| AASHTO MP 24 : 2015(R2018) | SPECIFICATION FOR WATERBORNE WHITE AND YELLOW TRAFFIC PAINTS |
| MIL-DTL-53022 Revision E:2012 | PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE |
| TT-P-645 Revision C:2013 | PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
| MIL-C-29475 Base Document:1994 | COATING, WATER BORNE POLYURETHANE CAMOUFLAGE |
| ASTM F 940 : 1999 : R2009 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
| ASTM C 647 : 2008 : R2013 | Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
| SSPC-PAINT 36 : 2013 | TWO-COMPONENT WEATHERABLE ALIPHATIC POLYURETHANE TOPCOAT, PERFORMANCE-BASED |
| ASTM D 1849 : 1995 : R2003 | Standard Test Method for Package Stability of Paint |
| ASTM D 3730 : 2017 : REDLINE | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
| ASTM D 2243 : 1995 : R2008 | Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings |
| ASTM D 50 : 1990 : R2005 | Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese |
| ASTM F 940 : 1999 : R2005 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
| L-C-530 Revision C:1987 | COATING, PIPE, THERMOPLASTIC RESIN |
| MIL-P-53032 Base Document:1983 | PRIMER COATING, WATER REDUCIBLE, EPOXY ESTER LATEX TYPE, LEAD AND CHROMATE FREE |
| ASTM D 1849 : 1995 | Standard Test Method for Package Stability of Paint |
| TT-P-002119 Base Document:1980 | PAINT, LATEX BASE, HIGH TRAFFIC AREA, FLAT AND EGGSHELL FINISH (LOW LUSTRE), (FOR INTERIOR USE) |
| ASTM D 2875 : 2000 : R2010 | Standard Test Method for Insoluble Ash of Vegetable-Tanned Leather |
| MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
| A-A-2994 Base Document:1996 | PRIMER COATING, INTERIOR, FOR WALLS AND WOOD |
| TT-S-001992 Base Document:1975 | STAIN, LATEX, EXTERIOR FOR WOOD SURFACES |
| DOD-E-18210 Revision B:1978 | ENAMEL, INTERIOR, DECK, RED (FORMULA NO. 23) (METRIC) |
| MIL-P-22299 Revision B:1985 | PAINT, ANTIFOULING, POLYISOBUTYLENE (FORMULA NO. 134) |
| TT-E-508 Revision C:1977 | ENAMEL, INTERIOR SEMIGLOSS, TINTS AND WHITES |
| ASTM D 2823 : 2005 | Standard Specification for Asphalt Roof Coatings, Asbestos Containing |
| SSPC-PAINT 23 : 2013 | LATEX PRIMER FOR STEEL SURFACES, PERFORMANCE-BASED |
| MIL-DTL-15090 Revision E:2010 | ENAMEL, EQUIPMENT, LIGHT GRAY, (NAVY FORMULA NO. 111) |
| ASTM D 6947/D6947M : 2016 : REDLINE | Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System |
| TT-C-498 Revision C:1980 | COATING COMPOUND, BITUMINOUS, FILLERS, SOLVENT TYPE, ALUMINUM PIGMENTED |
| ASTM D 605 : 1982 : R2007 | Standard Specification for Magnesium Silicate Pigment (Talc) |
| MIL-E-52798 Revision A:1976 | ENAMEL, ALKYD CAMOUFLAGE |
| MIL-P-15931 Revision F:1991 | PAINT, ANTIFOULING, VINYL (FORMULAS NO. 121A, AND 129A) |
| MIL-PRF-24635 Revision E:2009 | COATING SYSTEMS, WEATHER-RESISTANT, EXTERIOR USE |
| ASTM D 2337 : 2001 : R2010 | Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers |
| SSPC-PS 26.00 : 2016 | Aluminum-Pigmented Epoxy Coating System Materials Standard, Performance-Based; Type I for Use Over Blast Cleaned Steel; Type II for Use Over Hand-Cleaned Steel |
| ASTM D 3323 : 1980 : R1988 : EDT 1 | Guide for Testing Interior Solvent-Thinned Flat Wall Paints (Withdrawn 1993) |
| ASTM D 4213 : 2008 | Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
| ASTM D 2337 : 200 | Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers |
| ASTM D 4213 : 2008 : R2012 | Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
| SSPC-PAINT 46 : 2015 | ELASTOMERIC, WATER BASED, HIGH BUILD, FLAT, PERFORMANCE-BASED COATING FOR MASONRY AND CONCRETE |
| ASTM D 4712 : 1987 : REV A : R1996 | Standard Guide for Testing Industrial Water-Reducible Coatings |
| ASTM D 605 : 1982 : R1996 : EDT 1 | Standard Specification for Magnesium Silicate Pigment (Talc) |
| ASTM D 2875 : 2000 | Standard Test Method for Insoluble Ash of Vegetable-Tanned Leather |
| ASTM D 2336 : 1999 | Standard Guide for Specifying Factory Applied Wood Coatings (Withdrawn 2008) |
| A-A-3185 Base Document:2001 | PAINT, LATEX (CONTAINING POST-CONSUMER MATERIAL) |
| TT-E-505 Revision B:1985 | ENAMEL, (ODORLESS, ALKYD, INTERIOR, HIGH GLOSS) |
| MIL L 52962 : 0 | LACQUER, CHLOROSULFONATED POLYETHYLENE, CAMOUFLAGE, LUSTERLESS |
| TT P 002118 : LATEST | PAINT, TREE MARKING |
| TT P 001952 : C | PAINT, TRAFFIC AND AIRFIELD MARKING, WATERBORNE |
| MMM-A-002048 Base Document:1978 | ADHESIVE FIRE RESISTANT THERMAL INSULATION |
| SAE AMS 3117 : 2011 | PRIMER ZINC MOLYBDATE |
| TT-E-506 Revision K:1977 | ENAMEL, ALKYD, GLOSS, TINTS AND WHITE (FOR INTERIOR USE) |
| MIL C 22750 : F | COATING, EPOXY, VOC-COMPLIANT |
| TT-C-530 Revision C:1995 | COATING COMPOUND, RUST INHIBITIVE, FISH OIL BASE |
| MIL-PRF-32550 Base Document:2016 | METAL-RICH PRIMER |
| MIL-P-20088 Revision C:1986 | PRESERVATION SOLUTION CONCENTRATE, SONAR SEA CHEST |
| MIL-C-22325 Revision B:1988 | COLOR, TINTING, FOR INTERIOR NONFLAMING (DRY) PAINTS (METRIC) |
| MIL-PRF-14105 Revision E:2011 | PAINT, HEAT-RESISTING (FOR STEEL SURFACES) |
| TT-E-545 Revision C:1986 | PRIMER (ENAMEL - UNDERCOAT, ALKYD, ODORLESS, INTERIOR, FLAT, TINTS & WHITE) |
| MIL P 15183 : B NOTICE 1 | PAINT, EXTERIOR, ALKYD, GRAY, NO. 11 (FORMULA NO 109) (METRIC) |
| A-A-3058 Base Document:1996 | PAINT, INTERIOR, FIRE RETARDANT |
| MIL P 24647 : B | PAINT SYSTEM, ANTICORROSIVE & ANTIFOULING, SHIP HULL |
| ASTM D 2876 : 2000 : R2010 | Standard Test Method for Water-Soluble Matter of Vegetable-Tanned Leather |
| ASTM D 7538 : 2009 : R2013 | Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device |
| ASTM D 50 : 1990 : R2011 | Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese |
| MIL E 24763 : A | ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
| MIL-DTL-64159 Revision B:2011 | CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| TT-P-1511 Revision B:1981 | PAINT, LATEX (GLOSS & SEMIGLOSS, TINTS & WHITE) (FOR INTERIOR USE) |
| MIL C 4556 : E | COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS |
| MIL R 46073 : B | REMOVER, PAINT; ORGANIC, SOLVENT TYPE |
| ASTM D 7538 : 2009 | Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device |
| ASTM D 211 : 1967 : R2019 | Standard Specification for Chrome Yellow and Chrome Orange Pigments |
| ASTM D 6763 : 2016 : REDLINE | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
| ASTM D 4712 : 1987 : REV A : R2001 | Standard Guide for Testing Industrial Water-Reducible Coatings |
| TT-P-28 Revision H:2007 | PAINT, ALUMINUM, HEAT RESISTING |
| SSPC-PAINT 39 : 2015 | TWO-COMPONENT ALIPHATIC POLYUREA TOPCOAT, FAST- OR MODERATE-DRYING, PERFORMANCE-BASED |
| ASTM D 2243 : 1995 : R2003 | Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings |
| ASTM D 5324 : 2016 : REDLINE | Standard Guide for Testing Water-Borne Architectural Coatings |
| DOD-C-24654 Base Document:1985 | COATINGS, EPOXY, PORTABLE WATER TANKS (METRIC) |
| ASTM D 211 : 1967 : R2006 | Standard Specification for Chrome Yellow and Chrome Orange Pigments |
| A-A-3183 Base Document:2000 | PAINT, LATEX, EXTERIOR, (FOR WOOD AND MASONRY) |
| ASTM D 211 : 1967 : R2012 | Standard Specification for Chrome Yellow and Chrome Orange Pigments |
| MIL-A-10840 Revision D:1982 | ARSENIC TRIOXIDE, TECHNICAL |
| DOD-E-699 Revision D:1978 | ENAMEL, EXTERIOR, DECK, GRAY (FORMULA NO.20) (METRIC) |
| DOD-E-698 Revision C:1978 | ENAMEL, ALKYD, DECK, BLACK (FORMULA NO. 24) |
| AASHTO R 31 : 2009 : R2014 | PRACTICE FOR EVALUATION OF PROTECTIVE COATING SYSTEMS FOR STRUCTURAL STEEL |
| TT-E-529 Revision G:1988 | ENAMEL, ALKYD, SEMIGLOSS, LOW VOC CONTENT |
| MIL-DTL-11195 Revision H:2011 | Enamel, Lusterless, Fast Dry, VOC Compliant, (for use on Ammunition and Other Metals) |
| DOD-P-15146 Revision B:1977 | PAINT, EXTERIOR, DULL BLACK (FORMULA NO. 104) (METRIC) |
| MIL-DTL-53039 Revision E:2013 | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| A-A-3108 Revision B:2004 | TINTING MEDIUM, ENAMEL: UNIVERSAL COLORANTS |
| MIL E 15145 : C | ENAMEL, ZINC DUST PIGMENTED, FRESH WATER TANK PROTECTIVE, FORMULA NO. 102 |
| ASTM D 605 : 1982 : R2003 | Standard Specification for Magnesium Silicate Pigment (Talc) |
| ASTM D 6848 : 2002 | Standard Specification for Aluminum Pigmented Emulsified Asphalt Used as a Protective Coating for Roofing (Withdrawn 2011) |
| TT-P-001984 Base Document:1975 | PRIMER COATING, LATEX BASE, EXTERIOR, UNDERCOAT FOR WOOD, WHITE AND TINTS |
| TT-E-001384 Base Document:1979 | ENAMEL, GLOSS, SYNTHETIC (FOR METAL EQUIPMENT) |
| MIL-PRF-24647 Revision E:2013 | PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL |
| ASTM D 2932 : 1980 : R1988 : EDT 1 | Guide for Testing Exterior Solvent-Based House and Trim Coatings (Withdrawn 1993) |
| CSA O112 SERIES : 0 | CSA STANDARDS FOR WOOD ADHESIVES |
| ASTM D 6947 : 2007 : R2013 | Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 50 : 1990 : R1999 | Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese |
| ASTM D 605 : 1982 : R2012 | Standard Specification for Magnesium Silicate Pigment (Talc) |
| ASTM D 3450 : 2015 : REDLINE | Standard Test Method for Washability Properties of Interior Architectural Coatings |
| ASTM D 6511/D6511M : 2011-07 | TEST METHODS FOR SOLVENT BEARING BITUMINOUS COMPOUNDS |
| ASTM D 2205 : 2015 : REDLINE | Standard Guide for Selection of Tests for Traffic Paints |
| ASTM D 4712 : 1987 : REV A : R2005 | Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
| ASTM D 2337 : 2001 : R2014 | Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers (Withdrawn 2019) |
| ASTM D 4143 : 2016 : REDLINE | Standard Guide for Testing Latex Vehicles |
| ASTM D 2337 : 2001 : R2005 | Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers |
| SSPC-PAINT 43 : 2012 | DIRECT-TO-METAL ALIPHATIC POLYUREA COATING, PERFORMANCE-BASED |
| ASTM E 1 : 2014 : REDLINE | Standard Specification for ASTM Liquid-in-Glass Thermometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.