• There are no items in your cart

ASTM D 5900 : 2023

Current

Current

The latest, up-to-date edition.

Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

30-01-2023

€56.53
Excluding VAT

Committee
D 11
DocumentType
Standard
Pages
5
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This specification covers the chemical and physical quality specifications or requirements, or both, for Industry Reference Materials (IRMs) as cited in Practice D4678 and other standards.

1.2IRMs, as evaluated and referenced in Practice D4678, are vitally important to conduct product, specification, and development testing in the rubber and carbon black industries.

1.3Before a new lot of material can be accepted as an IRM, it must comply with the specifications prescribed in this specification. However, these specifications are only part of the requirements. Other requirements as given in Practice D4678 shall be met before a candidate material can be formally accepted as an IRM.

1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D 5604 : 2021 Standard Test Methods for Precipitated Silica—Surface Area by Single Point B.E.T. Nitrogen Adsorption
ASTM D 1993 : 2022 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D 5964 : 2016 : R2021 Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil
ASTM D 4678 : 2015 : REV A : R2019 Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 471 : 2016 : REV A : R2021 Standard Test Method for Rubber Property—Effect of Liquids
ASTM D 8471 : 2022 : REV A Standard Practice for Silica—Reference Compound
ASTM D 3182 : 2021 : REV A Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets

ASTM D 1500 : 2024 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 280 : 2001 : R2019 Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments
ASTM D 6738 : 2015 : R2023 Standard Test Method for Precipitated Silica—Volatile Content
ASTM D 1519 : 1995 : R2019 Standard Test Methods for Rubber Chemicals—Determination of Melting Range
ASTM D 6738 : 2015 : R2019 Standard Test Method for Precipitated Silica—Volatile Content
ASTM D 8300 : 2019 : R2023 Standard Test Method for Silica, Precipitated, Hydrated—Electrical Conductivity
ASTM D 445 : 2021 : EDT 2 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 445 : 2017 : REV A Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 287 : 2022 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method)
ASTM D 4936 : 2010 : R2019 Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration
ASTM D 2140 : 2008 : R2017 Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin
ASTM D 1500 : 2012 : R2017 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 611 : 2012 : R2016 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
ASTM D 445 : 2019 : REV A Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 97 : 2017 : REV B Standard Test Method for Pour Point of Petroleum Products
ASTM D 8300 : 2019 Standard Test Method for Silica, Precipitated, Hydrated—Electrical Conductivity
ASTM D 4936 : 2010 : R2023 Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration
ASTM D 2140 : 2024 Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin
ASTM D 611 : 2023 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
ASTM D 287 : 2012 : REV B Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
ASTM D 1519 : 1995 : R2023 Standard Test Methods for Rubber Chemicals—Determination of Melting Range
ASTM D 445 : 2019 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 2140 : 2023 : EDT 1 Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin
ASTM D 445 : 2024 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 445 : 2021 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 280 : 2001 : R2023 Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments
ASTM D 445 : 2018 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 445 : 2021 : EDT 1 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 2140 : 2023 Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin
ASTM D 445 : 2023 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 4678 : 2015 : REV A : R2023 Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D 287 : 2012 : REV B : R2019 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.