![header thumbnail](/images/publishers\astm_cover.gif)
ASTM D 6204 : 2019
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
Hardcopy , PDF
19-02-2020
English
01-05-2019
This test method covers the use of a rotorless oscillating shear rheometer for the measurement of the flow properties of raw rubber and unvulcanized rubber compounds.
Committee |
D 11
|
DocumentType |
Test Method
|
Pages |
12
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This test method covers the use of a rotorless oscillating shear rheometer for the measurement of the flow properties of raw rubber and unvulcanized rubber compounds. These flow properties are related to factory processing.
1.2The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 7050 : 2004 : R2019 | Standard Practice for Rubber from Natural Sources—Sampling and Sorting Bales Based on Predicted Processing Properties |
ASTM D 3848 : 2003 : R2018 | Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black |
ASTM D 3568 : 2003 : R2018 | Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil |
ASTM D 3186 : 2007 : R2016 | Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil |
ASTM D 3187 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber) |
ASTM D 3182 : 2016 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
ASTM F 2789 : 2010 : R2015 | Standard Guide for Mechanical and Functional Characterization of Nucleus Devices |
ASTM D 3188 : 2006 : R2017 | Standard Test Methods for Rubber—Evaluation of IIR (Isobutene-Isoprene Rubber) |
ASTM D 1417 : 2016 | Standard Test Methods for Rubber Latices—Synthetic |
ASTM D 3484 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber) |
ASTM D 3958 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber) |
ASTM D 3185 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil |
ASTM D 3189 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber) |
ASTM D 3190 : 2006 : R2016 | Standard Test Method for Rubber—Evaluation of Chloroprene Rubber (CR) |
ASTM D 3403 : 2007 : R2016 | Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber) |
ASTM D 1646 : 2000 | Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
ASTM D 1646 : 2004 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
ASTM D 1485 : 2007 : R2015 | Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation |
ASTM D 1485 : 1986 : R2002 | Standard Test Methods for Rubber from Natural Sources-Sampling and Sample Preparation |
ASTM D 1485 : 2007 : R2011 | Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation |
ASTM D 1646 : 1981 | Standard Test Method for Rubber - Viscosity And Vulcanization Characteristics ( Mooney Viscometer) |
ASTM D 5289 : 2006 | Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters |
ASTM D 4483 : 1999 | Standard Practice for Determining Precision for Test Method Standards in the Rubber and Carbon Black Industries |
ASTM D 5289 : 2007 | Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters |
ASTM D 5289 : 2017 | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
ASTM D 5289 : 2007 : REV A | Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters |
ASTM D 4483 : 2005 : REV A | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
ASTM D 1485 : 2007 | Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation |
ASTM D 1646 : 2019 : REV A | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
ASTM D 1646 : 2019 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
ASTM D 5289 : 2019 : REV A | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
ASTM D 5289 : 2019 | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
ASTM D 3896 : 2007 : R2011 | Standard Practice for Rubber From Synthetic Sources—Sampling |
ASTM D 1646 : 2003 : REV A | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
ASTM D 3896 : 1985 : R2001 | Standard Practice for Rubber From Synthetic Sources-Sampling |
ASTM D 6601 : 2012 | Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer |
ASTM D 1646 : 2015 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
ASTM D 1646 : 2003 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
ASTM D 3896 : 2007 : R2016 | Standard Practice for Rubber From Synthetic Sources—Sampling |
ASTM D 6601 : 2002 | Standard Test Method for Rubber Properties-Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer |
ASTM D 5289 : 1995 | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
ASTM D 6601 : 2002 : R2008 | Standard Test Method for Rubber Properties<span class='unicode'>—</span>Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer |
ASTM D 5289 : 2012 | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
ASTM D 6601 : 2015 | Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer |
ASTM D 1646 : 2006 | Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
ASTM D 1646 : 2007 : R2012 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
ASTM D 6601 : 2019 | Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer |
ASTM D 3896 : 2007 | Standard Practice for Rubber From Synthetic Sources—Sampling |
ASTM D 4483 : 2005 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
ASTM D 1646 : 2007 | Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
ASTM D 1646 : 2017 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
ASTM D 4483 : 2014 : REV A | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
ASTM D 4483 : 2014 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
ASTM D 6601 : 2000 | Standard Test Method for Rubber Properties-Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer |
ASTM D 4483 : 2018 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
ASTM D 4483 : 2005 : REV A : R2011 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
ASTM D 1646 : 1992 | Standard Test Method for RubberÐViscosity and Vulcanization Characteristics (Mooney Viscometer) |
ASTM D 3896 : 1985 : R1995 : EDT 1 | Standard Practice for Rubber From Synthetic Sources-Sampling |
ASTM D 1485 : 1986 : R1997 : EDT 1 | Standard Test Methods for Rubber from Natural Sources-Sampling and Sample Preparation |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.