ASTM D 6455 : 2011 : R2018
Current
Current
The latest, up-to-date edition.
Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGMs)
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-02-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 04.13, 2018 Gives recommendations for the selection of appropriate test methods for prefabricated bituminous sheet used in geomembrane applications to provide consistency in data reporting.
| Committee |
D 35
|
| DocumentType |
Guide
|
| Pages |
3
|
| ProductNote |
Reconfirmed 2018
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This guide provides recommendations for the selection of appropriate test methods for prefabricated bituminous sheet used in geomembrane applications to provide consistency in data reporting.
1.2This guide includes test methods for all types of prefabricated bituminous geomembranes (PBGMs).
1.3This guide is intended to aid all personnel involved in the selection, manufacture, or evaluation of prefabricated bituminous geomembranes. Field-related evaluation of PBGMs, including but not limited to seam testing, is beyond the scope of this guide.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 2643/D2643M : 2008 : R2019 | Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type) |
| ASTM D 7275 : 2007 : R2018 | Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGMs) |
| ASTM D 7274 : 2006 : REV A : R2018 : EDT 1 | Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (PBGMs) |
| ASTM D 1079 : 2018 : EDT 1 | Standard Terminology Relating to Roofing and Waterproofing |
| ASTM D 7003/D7003M : 2003 : R2021 | Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes |
| ASTM E 96/E96M : 2016 : REDLINE | Standard Test Methods for Water Vapor Transmission of Materials |
| ASTM D 471 : 2016 : REV A | Standard Test Method for Rubber Property—Effect of Liquids |
| ASTM D 4439 : 2020 | Standard Terminology for Geosynthetics |
| ASTM D 5322 : 1998 | Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
| ASTM D 1079 : 2008 : REV A | Standard Terminology Relating to Roofing and Waterproofing |
| ASTM D 696 : 2024 | Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and +30°C with a Vitreous Silica Dilatometer |
| ASTM D 5262 : 2006 | Standard Test Method for Evaluating the Unconfined Tension Creep Rupture Behavior of Geosynthetics |
| ASTM D 7274 : 2006 | Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM) |
| ASTM D 4439 : 2015 | Standard Terminology for Geosynthetics |
| ASTM D 4833/D4833M : 2007 : R2013 : EDT 1 | Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products |
| ASTM D 4354 : 2012 | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing |
| ASTM D 5884/D5884M : 2004 : REV A : R2015 : EDT 1 | Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes |
| ASTM D 1204 : 2014 : REDLINE | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 1204 : 2007 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 1079 : 2016 | Standard Terminology Relating to Roofing and Waterproofing |
| ASTM D 1079 : 2006 | Terminology Relating to Roofing and Waterproofing |
| ASTM E 154/E154M : 2008 : REV A : R2013 : EDT 1 | Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover |
| ASTM D 1434 : 1982 : R2003 | Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting |
| ASTM E 96/E96M : 2022 : REV A : EDT 1 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM D 5261 : 2010 : R2018 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
| ASTM E 96/E96M : 2022 : REV A | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM D 5199 : 2012 : R2019 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
| ASTM D 5147/D5147M : 2018 | Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material |
| ASTM D 7003/D7003M : 2003 : R2013 : EDT 1 | Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes |
| ASTM D 1204 : 2014 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 4885 : 2001 : R2006 | Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method |
| ASTM D 5617 : 2004 : R2010 | Standard Test Method for Multi-Axial Tension Test for Geosynthetics |
| ASTM D 5147/D5147M : 2018 : R2024 | Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material |
| ASTM E 96/E96M : 2021 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM D 696 : 2016 | Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer |
| ASTM D 1079 : 2020 | Standard Terminology Relating to Roofing and Waterproofing |
| ASTM D 6747 : 2015 : REDLINE | Standard Guide for Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes |
| ASTM D 5261 : 2010 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
| ASTM D 4873/D4873M : 2017 : R2021 | Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples |
| ASTM D 5262 : 2007 : R2016 | Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics |
| ASTM D 4354 : 2012 : R2020 | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products (RECPs) for Testing |
| ASTM D 4595 : 1986 : R2001 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
| ASTM E 96/E96M : 2022 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM D 5321/D5321M : 2017 : REDLINE | TEST METHOD FOR DETERMINING THE SHEAR STRENGTH OF SOIL-GEOSYNTHETIC AND GEOSYNTHETIC-GEOSYNTHETIC INTERFACES BY DIRECT SHEAR |
| ASTM D 7274 : 2006 : REV A : R2011 | Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM) |
| ASTM D 4885 : 2001 | Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method |
| ASTM D 5322 : 2017 : REDLINE | Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
| ASTM D 4885 : 2001 : R2023 | Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method |
| ASTM D 4439 : 2011 | Standard Terminology for Geosynthetics |
| ASTM D 1204 : 2008 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 6747 : 2021 | Standard Guide for Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes |
| ASTM D 5514/D5514M : 2018 | Standard Test Method for Large-Scale Hydrostatic Puncture Testing of Geosynthetics |
| ASTM D 6747 : 2002 : EDT 1 | Standard Guide for Selection of Techniques for Electrical Detection of Potential Leak Paths in Geomembrane |
| ASTM D 5262 : 2004 | Standard Test Method for Evaluating the Unconfined Tension Creep Behavior of Geosynthetics |
| ASTM D 6747 : 2004 | Standard Guide for Selection of Techniques for Electrical Detection of Potential Leak Paths in Geomembrane |
| ASTM D 5199 : 2001 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| ASTM E 96/E96M : 2023 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM D 4439 : 2015 : REV A | Standard Terminology for Geosynthetics |
| ASTM D 1079 : 2013 | Standard Terminology Relating to Roofing and Waterproofing |
| ASTM D 5321/D5321M : 2020 | Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear |
| ASTM D 1079 : 2007 : REV A | Terminology Relating to Roofing and Waterproofing |
| ASTM D 36/D36M : 2014 : EDT 1 | Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) |
| ASTM D 1079 : 2010 | Standard Terminology Relating to Roofing and Waterproofing |
| ASTM D 5884/D5884M : 2023 | Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes |
| ASTM E 96/E96M : 2024 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM D 7274 : 2006 : REV A : R2018 : EDT 1 | Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (PBGMs) |
| ASTM D 5514/D5514M : 2024 | Standard Test Methods for Large-Scale Hydrostatic Puncture Testing of Geosynthetics |
| ASTM D 1204 : 2014 : R2020 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM E 96/E96M : 2024 : REV A | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM D 4439 : 2002 | Standard Terminology for Geosynthetics |
| ASTM D 5261 : 1992 : R2003 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
| ASTM D 471 : 2016 : REV A : R2021 | Standard Test Method for Rubber Property—Effect of Liquids |
| ASTM D 4595 : 2011 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
| ASTM D 5262 : 2021 | Standard Test Method for Determining the Unconfined Tension Creep and Creep Rupture Behavior of Planar Geosynthetics Used for Reinforcement Purposes |
| ASTM D 4439 : 2024 : REV A | Standard Terminology for Geosynthetics |
| ASTM D 6747 : 2012 | Standard Guide for Selection of Techniques for Electrical Detection of Leaks in Geomembranes |
| ASTM D 1079 : 2018 | Standard Terminology Relating to Roofing and Waterproofing |
| ASTM D 5262 : 2002 : REV A | Standard Test Method for Evaluating the Unconfined Tension Creep Behavior of Geosynthetics |
| ASTM D 4885 : 2001 : R2018 | Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method |
| ASTM D 5262 : 1997 | Standard Test Method for Evaluating the Unconfined Tension Creep Behavior of Geosynthetics |
| ASTM D 4439 : 2017 | Standard Terminology for Geosynthetics |
| ASTM D 4873/D4873M : 2017 : REDLINE | Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples |
| ASTM D 5262 :2007 | Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics |
| ASTM D 5261 : 1992 : R1996 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
| ASTM D 696 : 2016 : REDLINE | Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer |
| ASTM D 4595 : 1986 : R1994 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
| ASTM D 4355/D4355M : 2021 | Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture, and Heat in a Xenon Arc-Type Apparatus |
| ASTM D 5322 : 1998 : R2009 | Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
| ASTM D 4885 : 2001 : R2011 | Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method |
| ASTM E 96/E96M : 2016 | Standard Test Methods for Water Vapor Transmission of Materials |
| ASTM D 1079 : 2005 : REV A | Terminology Relating to Roofing and Waterproofing |
| ASTM D 5321/D5321M : 2021 | Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear |
| ASTM D 7275 : 2007 | Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM) |
| ASTM D 5261 : 1992 : R2009 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
| ASTM D 4439 : 2024 : EDT 1 | Standard Terminology for Geosynthetics |
| ASTM D 5322 : 2023 | Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
| ASTM D 1079 : 2002 | Standard Terminology Relating to Roofing, Waterproofing, and Bituminous Materials |
| ASTM D 4885 : 1988 : R1995 | Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method |
| ASTM D 5262 : 2007 : R2012 | Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics |
| ASTM D 4439 : 2024 | Standard Terminology for Geosynthetics |
| ASTM D 1434 : 1982 : R2015 : EDT 1 | Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting |
| ASTM D 4439 : 2001 | Standard Terminology for Geosynthetics |
| ASTM D 4439 : 2023 : REV A | Standard Terminology for Geosynthetics |
| ASTM D 4439 : 2014 | Standard Terminology for Geosynthetics |
| ASTM D 4354 : 1999 : R2009 | Standard Practice for Sampling of Geosynthetics for Testing |
| ASTM D 1079 : 2001 | Standard Terminology Relating to Roofing, Waterproofing, and Bituminous Materials |
| ASTM D 4595 : 2017 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
| ASTM D 5199 : 2012 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
| ASTM D 4354 : 2012 : REDLINE | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing |
| ASTM D 1204 : 1994 : EDT 1 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 4439 : 2023 : REV B | Standard Terminology for Geosynthetics |
| ASTM D 1434 : 1982 : R2009 : EDT 1 | Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting |
| ASTM D 5199 : 2011 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
| ASTM D 4355/D4355M : 2014 : R2018 | Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc-Type Apparatus |
| ASTM D 1079 : 2024 | Standard Terminology Relating to Roofing and Waterproofing |
| ASTM D 4354 : 1999 | Standard Practice for Sampling of Geosynthetics for Testing |
| ASTM D 5322 : 1998 : R2003 | Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
| ASTM D 4439 : 2004 | Standard Terminology for Geosynthetics |
| ASTM D 5261 : 2010 : R2024 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
| ASTM D 4595 : 2009 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
| ASTM D 7274 : 2006 : REV A | Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM) |
| ASTM D 5322 : 2017 | Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
| ASTM D 5617 : 2004 | Standard Test Method for Multi-Axial Tension Test for Geosynthetics |
| ASTM D 6747 : 2015 | Standard Guide for Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes |
| ASTM D 4439 : 2017-08 | TERMINOLOGY FOR GEOSYNTHETICS |
| ASTM D 7275 : 2007 : R2018 | Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGMs) |
| ASTM D 1079 : 2000 : REV A | Standard Terminology Relating to Roofing, Waterproofing, and Bituminous Materials |
| ASTM D 746 : 2020 | Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
| ASTM D 7275 : 2007 : R2012 | Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM) |
| ASTM D 1434 : 2023 | Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting |
| ASTM D 5199 : 2001 : R2006 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
| ASTM D 1204 : 2002 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 4873/D4873M : 2017 | Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples |
| ASTM D 4439 : 2000 | Standard Terminology for Geosynthetics |
| ASTM D 4354 : 1999 : R2004 | Standard Practice for Sampling of Geosynthetics for Testing |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ASTM D 5617 : 2023 | Standard Test Method for Multi-Axial Elongation of Geomembranes |
| ASTM D 5617 : 2004 : R2015 | Standard Test Method for Multi-Axial Tension Test for Geosynthetics |
| ASTM D 1079 : 2013 : EDT 1 | Standard Terminology Relating to Roofing and Waterproofing |
| ASTM D 4439 : 2018 | Standard Terminology for Geosynthetics |
| ASTM D 4595 : 2005 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
| ASTM D 4595 : 2017 : REDLINE | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
| ASTM D 1079 : 2009 | Standard Terminology Relating to Roofing and Waterproofing |
| ASTM D 1434 : 1982 : R1998 | Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting |
| ASTM D 5617 : 1999 : EDT 1 | Standard Test Method for Multi-Axial Tension Test for Geosynthetics |
| ASTM D 746 : 2024 | Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
| ASTM D 7275 : 2006 | Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM) |
| ASTM D 746 : 2014 : REDLINE | Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
| ASTM D 4439 : 2023 | Standard Terminology for Geosynthetics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.