• ASTM D 6461/D6461M : 2018

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Standard Specifications for Silt Fence Materials

    Available format(s):  Hardcopy, PDF

    Superseded date:  21-01-2022

    Language(s):  English

    Published date:  23-01-2019

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Scope - (Show below) - (Hide below)

    1.1This specification covers requirements and test methods for geotextile fabrics and associated components used in temporary silt fence applications. Table 1 is a material purchasing specification based on AASHTO M288. Table 2 is a specification to be used in areas of high water flow. The specification on Table 2 is a higher strength, higher flow option than Table 1. Table 2 properties can withstand more hydraulic flow than the specification listed on Table 1. The Table 2 specification should be used in sensitive applications, such as areas near regulated waters and wetlands, but also areas that are prone to high flow runoff that require increased structural stability. The design professional has the option of Table 2 where the specifications listed in Table 1 are not sufficient to meet the demand of runoff.

    1.2Both specifications are applicable to the use of a geotextile as a vertical permeable interceptor designed to remove suspended soil from overland, nonconcentrated water flow. The function of a temporary silt fence is to trap and allow settlement of soil particles from sediment laden water. The purpose is to greatly limit the transport of eroded soil from construction sites and other areas affected by water runoff.

    Note 1:It should be noted that proper installation and maintenance are critical for the effective functioning of silt fence.

    1.3The tests used to characterize the silt fence are intended to ensure good workmanship and quality and are not necessarily adequate for design purposes in view of the wide variety of possible sediments and performance objectives.

    1.4The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents, therefore each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

    Note 2:Although the Table 1 specification should be acceptable in most erosion control applications, it should be noted that an alternative silt fence specification for a higher water flow rate, listed in Table 2, may be required by the engineers in areas that are susceptible to higher water runoff; using Table 2 specification will minimize safety hazards such as hydroplaning in these areas.

    1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    General Product Information - (Show below) - (Hide below)

    Committee D 35
    Document Type Standard
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 6462 : 2019 Standard Practice for Silt Fence Installation and Maintenance

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 4759 : 2011 Standard Practice for Determining the Specification Conformance of Geosynthetics
    ASTM D 4439 : 2020 Standard Terminology for Geosynthetics
    ASTM D 4439 : 2015 Standard Terminology for Geosynthetics
    ASTM D 653 : 2007 Standard Terminology Relating to Soil, Rock, and Contained Fluids
    ASTM D 4354 : 2012 Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing
    ASTM D 4873/D4873M : 2017 : R2021 Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples
    ASTM D 4354 : 2012 : R2020 Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products (RECPs) for Testing
    ASTM D 4751 : 2021 Standard Test Methods for Determining Apparent Opening Size of a Geotextile
    ASTM D 4439 : 2011 Standard Terminology for Geosynthetics
    ASTM D 4439 : 2015 : REV A Standard Terminology for Geosynthetics
    ASTM D 4751 : 1999 : REV A Standard Test Method for Determining Apparent Opening Size of a Geotextile
    ASTM D 4491/D4491M : 2020 : EDT 1 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
    ASTM D 4751 : 2004 Standard Test Method for Determining Apparent Opening Size of a Geotextile
    ASTM D 4759 : 2011 : R2018 Standard Practice for Determining the Specification Conformance of Geosynthetics
    ASTM D 4439 : 2002 Standard Terminology for Geosynthetics
    ASTM D 653 : 2020 : EDT 1 Standard Terminology Relating to Soil, Rock, and Contained Fluids
    ASTM D 4759 : 2002 Standard Practice for Determining the Specification Conformance of Geosynthetics
    ASTM D 4439 : 2017 Standard Terminology for Geosynthetics
    ASTM D 4751 : 1999 : REV A : R2004 Standard Test Method for Determining Apparent Opening Size of a Geotextile
    ASTM D 4751 : 2021 : REV A Standard Test Methods for Determining Apparent Opening Size of a Geotextile
    ASTM D 4355/D4355M : 2021 Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture, and Heat in a Xenon Arc-Type Apparatus
    ASTM D 653 : 2021 : REV A Standard Terminology Relating to Soil, Rock, and Contained Fluids
    ASTM D 4491/D4491M : 2021 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
    ASTM D 4759 : 2002 : R2007 Standard Practice for Determining the Specification Conformance of Geosynthetics
    ASTM D 653 : 2021 Standard Terminology Relating to Soil, Rock, and Contained Fluids
    ASTM D 4751 : 2012 Standard Test Method for Determining Apparent Opening Size of a Geotextile
    ASTM D 653 : 2021 : REV B Standard Terminology Relating to Soil, Rock, and Contained Fluids
    ASTM D 4439 : 2001 Standard Terminology for Geosynthetics
    ASTM D 4439 : 2014 Standard Terminology for Geosynthetics
    ASTM D 4354 : 1999 : R2009 Standard Practice for Sampling of Geosynthetics for Testing
    ASTM D 4355/D4355M : 2014 : R2018 Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc-Type Apparatus
    ASTM D 4354 : 1999 Standard Practice for Sampling of Geosynthetics for Testing
    ASTM D 4759 : 1988 : R1996 Standard Practice for Determining the Specification Conformance of Geosynthetics
    ASTM D 4439 : 2004 Standard Terminology for Geosynthetics
    ASTM D 4751 : 2020 : REV B Standard Test Methods for Determining Apparent Opening Size of a Geotextile
    ASTM D 4751 : 2016 Standard Test Methods for Determining Apparent Opening Size of a Geotextile
    ASTM D 4873/D4873M : 2017 Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples
    ASTM D 4439 : 2000 Standard Terminology for Geosynthetics
    ASTM D 123 : 2001 Standard Terminology Relating to Textiles
    ASTM D 4354 : 1999 : R2004 Standard Practice for Sampling of Geosynthetics for Testing
    ASTM D 4439 : 2018 Standard Terminology for Geosynthetics
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective