ASTM D 5268 : 2019 : EDT 1
|
Standard Specification for Topsoil Used for Landscaping and Construction Purposes |
ASTM D 4700 : 2015
|
Standard Guide for Soil Sampling from the Vadose Zone (Withdrawn 2024) |
ASTM D 2973 : 2016
|
Standard Test Method for Total Nitrogen in Peat Materials |
ASTM F 1759 : 1997 : R2018
|
Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications |
ASTM D 4427 : 2018
|
Standard Classification of Peat Samples by Laboratory Testing |
ASTM D 6836 : 2016
|
Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge |
ASTM D 7400/D7400M : 2019
|
Standard Test Methods for Downhole Seismic Testing |
ASTM D 2980 : 2017 : EDT 1
|
Standard Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials |
ASTM D 6032/D6032M : 2017
|
Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core |
ASTM D 8037/D8037M : 2016
|
Standard Practice for Direct Push Hydraulic Logging for Profiling Variations of Permeability in Soils |
ASTM D 4546 : 2021
|
Standard Test Methods for One-Dimensional Swell or Collapse of Soils |
ASTM D 4452 : 2014
|
Standard Practice for X-Ray Radiography of Soil Samples |
ASTM D 7208 : 2014 : EDT 1
|
Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion |
ASTM D 8081 : 2017
|
Standard Guide for Theory and Principles for Obtaining Reliable and Accurate Bulk Solids Flow Data Using a Direct Shear Cell |
ASTM D 6564/D6564M : 2017
|
Standard Guide for Field Filtration of Groundwater Samples |
ASTM D 4647/D4647M : 2013:R2020
|
Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test |
ASTM D 4404 : 2018
|
Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry |
ASTM D 7338 : 2014
|
Standard Guide for Assessment Of Fungal Growth in Buildings |
ASTM D 8064 : 2016
|
Standard Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams |
ASTM D 6312 : 2017
|
Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs at Waste Disposal Facilities |
ASTM D 7626 : 2019 : EDT 1
|
Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay |
ASTM D 7762 : 2018 : EDT 1
|
Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash |
ASTM E 3183 : 2019
|
Standard Guide for Harvesting Coal Combustion Products Stored in Active and Inactive Storage Areas for Beneficial Use |
ASTM D 6102 : 2020
|
Standard Guide for Installation of Geosynthetic Clay Liners |
ASTM D 5550 : 2014
|
Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer |
ASTM D 5879/D5879M : 2018
|
Standard Practice for Surface Site Characterization for On-Site Septic Systems |
ASTM D 5716/D5716M : 2020
|
Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir |
ASTM D 5783 : 2018
|
Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices |
ASTM D 7702/D7702M : 2014 : R2021
|
Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics |
ASTM D 4254 : 2016
|
Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density |
ASTM D 5121 : 2015
|
Standard Practice for Preparation of Rock Slabs for Durability Testing |
ASTM D 2113 : 2014
|
Standard Practice for Rock Core Drilling and Sampling of Rock for Site Exploration (Withdrawn 2023) |
ASTM D 4436 : 2013 : EDT 1
|
Standard Test Method for Rock Bolt Long-Term Load Retention Test (Withdrawn 2022) |
ASTM D 7070 : 2016
|
Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature |
ASTM D 8167/D8167M : 2018 : REV A
|
Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth) |
ASTM D 6067/D6067M : 2017
|
Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization and Estimation of Hydraulic Conductivity |
ASTM D 1140 : 2017
|
Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing |
ASTM D 4793 : 2009 : R2017
|
Standard Test Method for Sequential Batch Extraction of Waste with Water |
ASTM D 8012 : 2018
|
Standard Practice for Reclamation of Scrap and Waste Asphalt Shingles to Produce Reclaimed Asphalt Shingles (RAS) for Use in Transportation Applications |
ASTM D 4318 : 2017 : EDT 1
|
Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils |
ASTM D 7012 : 2014 : EDT 1
|
Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures |
ASTM D 7481 : 2018
|
Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder |
ASTM D 7048 : 2016
|
Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs |
ASTM D 6459 : 2019
|
Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion |
ASTM D 5519 : 2015
|
Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials (Withdrawn 2024) |
ASTM D 5284 : 2009 : R2017
|
Standard Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid |
ASTM D 4394 : 2017
|
Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method |
ASTM D 6274 : 2018
|
Standard Guide for Conducting Borehole Geophysical Logging - Gamma |
ASTM D 1452/D1452M : 2016
|
Standard Practice for Soil Exploration and Sampling by Auger Borings |
ASTM D 1586/D1586M : 2018
|
Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils |
ASTM D 6243/D6243M : 2020
|
Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method |
ASTM D 4223/D4223M : 2020
|
Standard Practices for Preparation of Test Specimens of Asphalt-Stabilized Soils |
ASTM D 5924 : 2018 : REDLINE
|
Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations |
ASTM E 2278 : 2013 : R2019
|
Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage |
ASTM D 3441 : 2016
|
Standard Test Method for Mechanical Cone Penetration Testing of Soils |
ASTM D 4914/D4914M : 2016
|
Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit |
ASTM D 1632 : 2017 : EDT 1
|
Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory |
ASTM D 5093 : 2015 : EDT 1
|
Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring (Withdrawn 2024) |
ASTM D 2487 : 2017 : EDT 1
|
Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
ASTM D 5786 : 2017
|
Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems |
ASTM D 6519 : 2015
|
Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler |
ASTM D 7181 : 2020
|
Standard Test Method for Consolidated Drained Triaxial Compression Test for Soils |
ASTM D 4696 : 2018
|
Standard Guide for Pore-Liquid Sampling from the Vadose Zone |
ASTM D 6766 : 2020 : REV A
|
Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions |
ASTM D 3282 : 2015
|
Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes |
ASTM D 4630 : 2019
|
Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test |
ASTM D 2419 : 2014
|
Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
ASTM D 7929 : 2020
|
Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells |
ASTM D 7100 : 2011 : R2020
|
Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions |
ASTM D 3967 : 2016
|
Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens |
ASTM D 6539 : 2013
|
Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air (Withdrawn 2022) |
ASTM D 5030/D5030M : 2021
|
Standard Test Methods for Density of In-Place Soil and Rock Materials by the Water Replacement Method in a Test Pit |
ASTM D 5202/D5202M : 2016
|
Standard Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils |
ASTM D 5780 : 2018
|
Standard Test Methods for Individual Piles in Permafrost Under Static Axial Compressive Load |
ASTM D 5995 : 2018
|
Standard Guide for Environmental Site Investigation in Cold Regions |
ASTM D 7047 : 2015 : EDT 1
|
Standard Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium) |
ASTM D 7013/D7013M : 2015
|
Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges |
ASTM D 5313/D5313M : 2021
|
Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions |
ASTM D 7699/D7699M : 2020
|
Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites |
ASTM D 5195 : 2014 : EDT 1
|
Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods |
ASTM D 7380 : 2015
|
Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer |
ASTM E 2993 : 2016
|
Standard Guide for Evaluating Potential Hazard as a Result of Methane in the Vadose Zone |
ASTM D 7648/D7648M : 2018
|
Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment |
ASTM D 8121/D8121M : 2019
|
Standard Test Method for Approximating the Shear Strength of Cohesive Soils by the Handheld Vane Shear Device |
ASTM D 7352 : 2018
|
Standard Practice for Volatile Contaminant Logging Using a Membrane Interface Probe (MIP) in Unconsolidated Formations with Direct Push Methods |
ASTM D 4016 : 2014
|
Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer (Laboratory Method) (Withdrawn 2023) |
ASTM D 4832 : 2016 : EDT 1
|
Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders |
ASTM D 6167 : 2019
|
Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper |
ASTM D 6036 : 1996 : R2014
|
Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements—Use of Maps (Withdrawn 2023) |
ASTM D 4729 : 2019
|
Standard Test Method for In Situ Stress and Modulus of Deformation Using the Flat Jack Method |
ASTM D 5785/D5785M : 2020
|
Standard Practice for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test) |
ASTM D 6431 : 2018
|
Standard Guide for Using the Direct Current Resistivity Method for Subsurface Site Characterization |
ASTM D 5876/D5876M : 2017
|
Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices |
ASTM D 4623 : 2016
|
Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge |
ASTM F 2107 : 2008 : R2020
|
Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields |
ASTM D 6023 : 2016
|
Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM) |
ASTM D 5731 : 2016
|
Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications |
ASTM D 6128 : 2016
|
Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester |
ASTM D 8151 : 2019 : EDT 1
|
Standard Practice for Obtaining Rainfall Runoff from Unvegetated Rolled and Hydraulic Erosion Control Products (RECPs and HECPs) for Acute Ecotoxicity Testing |
ASTM D 3689/D3689M : 2007 : R2013 : EDT 1
|
Standard Test Methods for Deep Foundations Under Static Axial Tensile Load |
ASTM D 6683 : 2019
|
Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress |
ASTM D 5787 : 2020
|
Standard Practice for Monitoring Well Protection At or Near Land Surface |
ASTM D 7069 : 2004 : R2015
|
Standard Guide for Field Quality Assurance in a Groundwater Sampling Event |
ASTM D 4220/D4220M : 2014
|
Standard Practices for Preserving and Transporting Soil Samples (Withdrawn 2023) |
ASTM F 1668 : 2016
|
Standard Guide for Construction Procedures for Buried Plastic Pipe |
ASTM D 5607 : 2016
|
Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force |
ASTM D 4520 : 2018
|
Standard Practice for Determining Water Injectivity Through the Use of On-Site Floods |
ASTM D 6234 : 2013 : R2020
|
Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure |
ASTM D 5881 : 2020
|
Standard Practice for (Analytical Procedures) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug) |
ASTM D 6938 : 2017 : REV A : EDT 1
|
Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) |
ASTM D 8359 : 2021
|
Standard Test Method for Determining the In Situ Rock Deformation Modulus and Other Associated Rock Properties Using a Flexible Volumetric Dilatometer |
ASTM D 6706 : 2001 : R2021
|
Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil |
ASTM D 4972 : 2019
|
Standard Test Methods for pH of Soils |
ASTM D 4403 : 2020
|
Standard Practice for Extensometers Used in Rock |
ASTM D 7698 : 2021
|
Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method |
ASTM D 5912 : 2020
|
Standard Practice for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug) |
ASTM D 698 : 2012 : R2021
|
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3)) |
ASTM D 5101 : 2012 : R2017
|
Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
ASTM D 1633 : 2017
|
Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders |
ASTM D 4718/D4718M : 2015
|
Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
ASTM D 6911 : 2015
|
Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis |
ASTM D 6141 : 2018
|
Standard Guide for Screening Clay Portion and Index Flux of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids |
ASTM D 5141 : 2011 : R2018
|
Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device |
ASTM D 1241 : 2015
|
Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses (Withdrawn 2024) |
ASTM D 5753 : 2018
|
Standard Guide for Planning and Conducting Geotechnical Borehole Geophysical Logging |
ASTM D 6001/D6001M : 2020
|
Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization |
ASTM D 5887/D5887M : 2020
|
Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter |
ASTM D 5092/D5092M : 2016
|
Standard Practice for Design and Installation of Groundwater Monitoring Wells |
ASTM D 2977 : 2014
|
Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes |
ASTM D 6724/D6724M : 2016
|
Standard Guide for Installation of Direct Push Groundwater Monitoring Wells |
ASTM D 4633 : 2016
|
Standard Test Method for Energy Measurement for Dynamic Penetrometers |
ASTM D 5777 : 2018
|
Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation |
ASTM D 4643 : 2017
|
Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating |
ASTM D 7277 : 2016
|
Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow |
ASTM D 2937 : 2017 : EDT 2
|
Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method |
ASTM D 7949 : 2014
|
Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations (Withdrawn 2023) |
ASTM D 6780/D6780M : 2019
|
Standard Test Methods for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR) |
ASTM D 6030 : 2015
|
Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability (Withdrawn 2024) |
ASTM D 4435 : 2013 : EDT 1
|
Standard Test Method for Rock Bolt Anchor Pull Test (Withdrawn 2022) |
ASTM D 2978 : 2015 : EDT 1
|
Standard Test Methods for Volume of Processed Peat Materials |
ASTM E 2060 : 2006 : R2014
|
Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes |
ASTM D 4253 : 2016 : EDT 1
|
Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
ASTM D 4767 : 2011 : R2020
|
Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils |
ASTM D 6825 : 2014 : EDT 1
|
Standard Guide for Placement of Riprap Revetments |
ASTM E 1676 : 2012 : R2021
|
Standard Guide for Conducting Laboratory Soil Toxicity or Bioaccumulation Tests with the Lumbricid Earthworm Eisenia Fetida and the Enchytraeid Potworm Enchytraeus albidus |
ASTM D 4186/D4186M : 2020 : EDT 1
|
Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading |
ASTM D 6913/D6913M : 2017
|
Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
ASTM D 4373 : 2021
|
Standard Test Method for Rapid Determination of Carbonate Content of Soils |
ASTM D 2974 : 2020 : EDT 1
|
Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils |
ASTM C 1127/C1127M : 2015
|
Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface |
ASTM D 2321 : 2020
|
Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications |
ASTM D 4221 : 2018
|
Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer |
ASTM D 8152 : 2018
|
Standard Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test |
ASTM D 6771 : 2018
|
Standard Practice for Low-Flow Purging and Sampling for Wells and Devices Used for Ground-Water Quality Investigations |
ASTM D 3839 : 2014 : R2019
|
Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe |
ASTM D 1587/D1587M : 2015
|
Standard Practice for Thin-Walled Tube Sampling of Fine-Grained Soils for Geotechnical Purposes (Withdrawn 2024) |
ASTM D 2850 : 2015
|
Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils |
ASTM D 6432 : 2019
|
Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation |
ASTM D 8107 : 2018
|
Standard Practice for Determining Sediment Pond Skimmer Flow Rate |
ASTM D 4945 : 2017
|
Standard Test Method for High-Strain Dynamic Testing of Deep Foundations |
ASTM D 6684 : 2018
|
Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Systems |
ASTM D 5737/D5737M : 2019
|
Standard Guide for Methods for Measuring Well Discharge |
ASTM D 5143 : 2006 : R2015 : EDT 1
|
Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography (Withdrawn 2023) |
ASTM D 6092 : 2014 : EDT 1
|
Standard Practice for Specifying Standard Sizes of Stone for Erosion Control |
ASTM D 5858 : 1996 : R2020
|
Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory |
ASTM D 7608 : 2018
|
Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils |
ASTM D 6230 : 2021 : EDT 1
|
Standard Practices for Monitoring Earth or Structural Movement Using Inclinometers |
ASTM D 7263 : 2021
|
Standard Test Methods for Laboratory Determination of Density and Unit Weight of Soil Specimens |
ASTM D 5719 : 2013
|
Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes (Withdrawn 2022) |
ASTM D 5611 : 1994 : R2016
|
Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application |
ASTM D 6151/D6151M : 2015
|
Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling (Withdrawn 2024) |
ASTM D 6725/D6725M : 2016
|
Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers |
ASTM D 8106 : 2017
|
Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay |
ASTM D 7300 : 2018
|
Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain |
ASTM E 2243 : 2013 : R2019
|
Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation |
ASTM D 5126 : 2016 : EDT 1
|
Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone |
ASTM D 6430 : 2018
|
Standard Guide for Using the Gravity Method for Subsurface Site Characterization |
ASTM D 5978/D5978M : 2016
|
Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells |
ASTM D 2936 : 2020
|
Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens |
ASTM D 6914/D6914M : 2016
|
Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices |
ASTM D 5923 : 2018
|
Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations |
ASTM D 4648/D4648M : 2016
|
Standard Test Methods for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil |
ASTM D 6000/D6000M : 2015 : EDT 1
|
Standard Guide for Presentation of Water-Level Information from Groundwater Sites (Withdrawn 2024) |
ASTM D 7758 : 2017
|
Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations |
ASTM D 6282/D6282M : 2014
|
Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations (Withdrawn 2023) |
ASTM D 5240/D5240M : 2020
|
Standard Test Method for Evaluation of the Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate |
ASTM D 2216 : 2019
|
Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
ASTM D 4971 : 2016
|
Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack |
ASTM D 8199 : 2020
|
Standard Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control |
ASTM D 5873 : 2014
|
Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method (Withdrawn 2023) |
ASTM D 4943 : 2018
|
Standard Test Method for Shrinkage Factors of Cohesive Soils by the Water Submersion Method |
ASTM D 4043 : 2017
|
Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques |
ASTM D 5779/D5779M : 2014
|
Standard Test Method for Field Determination of Rapid Specific Gravity of Rock and Manmade Materials for Erosion Control (Withdrawn 2023) |
ASTM D 4553 : 2018
|
Standard Test Method for Determining In Situ Creep Characteristics of Rock |
ASTM D 8249 : 2019
|
Standard Practice for Use of Rotary Kiln Produced Porous Ceramic as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes |
ASTM D 6910/D6910M : 2019
|
Standard Test Method for Marsh Funnel Viscosity of Construction Slurries |
ASTM D 5088 : 2020
|
Standard Practice for Decontamination of Field Equipment Used at Waste Sites |
ASTM F 2747 : 2019
|
Standard Guide for Construction of Sand-based Rootzones for Golf Putting Greens and Tees |
ASTM D 1997 : 2020
|
Standard Test Method for Laboratory Determination of the Fiber Content of Peat and Organic Soils by Dry Mass |
ASTM D 8038 : 2016
|
Standard Practice for Reclamation of Recycled Aggregate Base (RAB) Material |
ASTM D 6760 : 2016
|
Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing |
ASTM D 3404 : 2015
|
Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers (Withdrawn 2024) |
ASTM D 5918 : 2013 : EDT 1
|
Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils (Withdrawn 2022) |
ASTM D 7664 : 2010 : R2018 : EDT 1
|
Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils |
ASTM D 5882 : 2016
|
Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations |
ASTM D 4105/D4105M : 2020
|
Standard Practice for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method |
ASTM D 4644 : 2016
|
Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks |
ASTM D 5269 : 2015
|
Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method (Withdrawn 2024) |
ASTM D 5520 : 2018
|
Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression |
ASTM D 4944 : 2018
|
Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester |
ASTM D 5744 : 2018
|
Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
ASTM D 6727/D6727M : 2016
|
Standard Guide for Conducting Borehole Geophysical Logging—Neutron |
ASTM D 5490 : 1993 : R2014 : EDT 1
|
Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information (Withdrawn 2023) |
ASTM D 1634 : 2017
|
Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method) |
ASTM D 7262 : 2010 : R2016 : EDT 1
|
Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids |
ASTM D 6475 : 2017
|
Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets |
ASTM D 6452 : 2018
|
Standard Guide for Purging Methods for Wells Used for Ground Water Quality Investigations |
ASTM D 5980 : 2016
|
Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring |
ASTM D 2167 : 2015
|
Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method (Withdrawn 2024) |
ASTM D 5971/D5971M : 2016
|
Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material |
ASTM D 4044/D4044M : 2015
|
Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers (Withdrawn 2024) |
ASTM D 7014 : 2018 : EDT 1
|
Standard Practice for Installation of Double-Twisted Wire Mesh Gabions and Revet Mattresses |
ASTM D 4631 : 2018
|
Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique |
ASTM D 586 : 2019
|
Standard Test Method for Ash and Organic Matter Content of Degradable Erosion Control Products |
ASTM D 7663 : 2012 : R2018 : EDT 1
|
Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations |
ASTM D 7242/D7242M : 2006 : R2013 : EDT 1
|
Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers (Withdrawn 2022) |
ASTM D 8326 : 2021
|
Standard Practice for Measurement of the Kinetic Energy of Simulated Rainfall |
ASTM D 7928 : 2021 : EDT 1
|
Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis |
ASTM D 6088 : 2006 : R2016
|
Standard Practice for Installation of Geocomposite Pavement Drains |
ASTM D 7503 : 2018
|
Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils |
ASTM D 8281/D8281M : 2021
|
Standard Test Method for Determining the Presence of Expanding Clays in Rock for Erosion Control Using Ethylene Glycol |
ASTM D 4992 : 2014 : EDT 2
|
Standard Practice for Evaluation of Rock to be Used for Erosion Control |
ASTM D 3740 : 2019
|
Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
ASTM D 4083 : 1989 : R2016
|
Standard Practice for Description of Frozen Soils (Visual-Manual Procedure) |
ASTM D 5521/D5521M : 2018
|
Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers |
ASTM D 5875/D5875M : 2018
|
Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices |
ASTM D 5850 : 2020
|
Standard Practice for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells |
ASTM D 5220/D5220M : 2021
|
Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method |
ASTM D 7299 : 2020
|
Standard Practice for Verifying Performance of a Vertical Inclinometer Probe |
ASTM D 7499/D7499M : 2009 : R2014
|
Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness |
ASTM D 4543 : 2019
|
Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances |
ASTM D 3385 : 2018
|
Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer |
ASTM D 4611 : 2016
|
Standard Test Method for Specific Heat of Rock and Soil |
ASTM D 6285 : 1999 : R2016
|
Standard Guide for Locating Abandoned Wells |
ASTM D 6572 : 2021
|
Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test |
ASTM D 2435/D2435M : 2011 : R2020
|
Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading |
ASTM D 7891 : 2015
|
Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell |
ASTM D 4531 : 2015
|
Standard Test Methods for Bulk and Dry Density of Peat and Peat Products |
ASTM D 7276 : 2016
|
Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow |
ASTM D 7986 : 2017 : REV A
|
Standard Practice for Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing |
ASTM D 5778 : 2020
|
Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils |
ASTM D 6467 : 2013 : EDT 1
|
Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils |
ASTM D 8082 : 2018
|
Standard Specification for Elemental Impurity Limits in Erosion Control Products used for Land Application |
ASTM D 7351/D7351M : 2021
|
Standard Test Method for Determination of Sediment Retention Device (SRD) Effectiveness in Sheet Flow Applications |
ASTM D 5856 : 2015
|
Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter (Withdrawn 2024) |
ASTM D 3966/D3966M : 2007 : R2013 : EDT 1
|
Standard Test Methods for Deep Foundations Under Lateral Load |
ASTM D 6146 : 1997 : R2018
|
Standard Guide for Monitoring Aqueous Nutrients in Watersheds |
ASTM D 6473 : 2015
|
Standard Test Method For Specific Gravity And Absorption of Rock For Erosion Control |
ASTM D 7382 : 2020
|
Standard Test Methods for Determination of Maximum Dry Unit Weight of Granular Soils Using a Vibrating Hammer |
ASTM D 7759/D7759M : 2021
|
Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration |
ASTM D 7101 : 2013 : EDT 1
|
Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions (Withdrawn 2022) |
ASTM D 6640 : 2001 : R2015
|
Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations |
ASTM D 5718 : 2013
|
Standard Guide for Documenting a Groundwater Flow Model Application (Withdrawn 2022) |
ASTM D 6462 : 2019
|
Standard Practice for Silt Fence Installation and Maintenance |
ASTM D 6598 : 2019
|
Standard Guide for Installing and Operating Settlement Points for Monitoring Vertical Deformations |
ASTM D 2976 : 2015
|
Standard Test Method for pH of Peat Materials |
ASTM D 6820 : 2020
|
Standard Guide for Use of the Time Domain Electromagnetic Method for Geophysical Subsurface Site Investigation |
ASTM D 5447 : 2017
|
Standard Guide for Application of a Numerical Groundwater Flow Model to a Site-Specific Problem |
ASTM D 7458 : 2014
|
Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection |
ASTM D 5473/D5473M : 2020
|
Standard Practice for (Analytical Procedures) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer |
ASTM D 7383 : 2019
|
Standard Test Methods for Axial Rapid Load (Compressive Force Pulse) Testing of Deep Foundations |
ASTM D 5549 : 2019
|
Standard Guide for Contents of Geostatistical Site Investigation Report |
ASTM D 5609 : 2016
|
Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling |
ASTM D 3213 : 2019
|
Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil |
ASTM D 5782 : 2018
|
Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices |
ASTM E 2277 : 2014(R2019)
|
Standard Guide for Design and Construction of Coal Ash Structural Fills |
ASTM D 7760 : 2018
|
Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter |
ASTM D 7780 : 2020
|
Standard Practice for Minimum Geospatial Data for Representing Coal Mining Features |
ASTM D 7560 : 2016 : EDT 1
|
Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs) |
ASTM D 5878 : 2019
|
Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes |
ASTM D 806 : 2019
|
Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures |
ASTM D 7858 : 2013 : R2018
|
Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry |
ASTM D 6517 : 2018
|
Standard Guide for Field Preservation of Ground Water Samples |
ASTM D 5567 : 1994 : R2018
|
Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
ASTM D 7128 : 2018
|
Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation |
ASTM D 5312/D5312M : 2012 : R2013
|
Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions |
ASTM D 7272 : 2006 : R2018
|
Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Premanufactured Taped Methods |
ASTM D 7243 : 2011 : R2020
|
Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges |
ASTM D 5472/D5472M : 2020
|
Standard Practice for Determining Specific Capacity and Estimating Transmissivity at the Control Well |
ASTM D 5233 : 1992 : R2017
|
Standard Test Method for Single Batch Extraction Method for Wastes |
ASTM D 8232 : 2018
|
Standard Test Procedures for Measuring the Inclination of Deep Foundations |
ASTM D 4753 : 2015
|
Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing |
ASTM D 559/D559M : 2015
|
Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures |
ASTM D 5334 : 2014
|
Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure |
ASTM D 6103/D6103M : 2017 : EDT 1
|
Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM) |
ASTM D 4525 : 2013 : EDT 2
|
Standard Test Method for Permeability of Rocks by Flowing Air (Withdrawn 2022) |
ASTM D 5311/D5311M : 2013
|
Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil (Withdrawn 2022) |
ASTM D 7830/D7830M : 2014 : R2021 : EDT 1
|
Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge |
ASTM D 6758 : 2018 : EDT 1
|
Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method |
ASTM D 5855/D5855M : 2020
|
Standard Practice for (Analytical Procedure) Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well |
ASTM D 2944 : 2014
|
Standard Practice of Sampling Processed Peat Materials |
ASTM D 4829 : 2021
|
Standard Test Method for Expansion Index of Soils |
ASTM D 4015 : 2015 : EDT 1
|
Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices |
ASTM F 480 : 2014
|
Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 |
ASTM D 1143/D1143M : 2020
|
Standard Test Methods for Deep Foundation Elements Under Static Axial Compressive Load |
ASTM D 6639 : 2018
|
Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Site Characterizations |
ASTM D 6726 : 2015
|
Standard Guide for Conducting Borehole Geophysical Logging—Electromagnetic Induction (Withdrawn 2024) |
ASTM D 560/D560M : 2016
|
Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures |
ASTM D 5298 : 2016
|
Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper |
ASTM D 1635/D1635M : 2019
|
Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading |
ASTM D 6024/D6024M : 2016
|
Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application |
ASTM D 5872/D5872M : 2018
|
Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices |
ASTM D 6773 : 2016
|
Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester |
ASTM D 4612 : 2016
|
Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil |
ASTM D 5255 : 2015
|
Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock |
ASTM D 2166/D2166M : 2016
|
Standard Test Method for Unconfined Compressive Strength of Cohesive Soil |
ASTM D 5335 : 2014
|
Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges (Withdrawn 2023) |
ASTM D 7015/D7015M : 2018
|
Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils |
ASTM D 6393/D6393M : 2021
|
Standard Test Method for Bulk Solids Characterization by Carr Indices |
ASTM D 7045 : 2017
|
Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for Waste Disposal Facilities |
ASTM D 4544 : 2020
|
Standard Practice for Estimating Peat Deposit Thickness |
ASTM D 8122 : 2021
|
Standard Test Method for Determining Mass per Unit Area of Geohazard Nettings |
ASTM D 6429 : 2020
|
Standard Guide for Selecting Surface Geophysical Methods |
ASTM E 2531 : 2006 : R2020
|
Standard Guide for Development of Conceptual Site Models and Remediation Strategies for Light Nonaqueous-Phase Liquids Released to the Subsurface |
ASTM D 1556/D1556M : 2015 : EDT 1
|
Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method (Withdrawn 2024) |
ASTM D 3551 : 2017
|
Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer |
ASTM D 2573/D2573M : 2018
|
Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils |
ASTM D 1883 : 2016
|
Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils |
ASTM D 6635 : 2015
|
Standard Test Method for Performing the Flat Plate Dilatometer (Withdrawn 2024) |
ASTM D 6941 : 2019
|
Standard Practice for Measuring Fluidization Segregation Tendencies of Powders |
ASTM D 6461/D6461M : 2018
|
Standard Specifications for Silt Fence Materials |
ASTM D 7764 : 2020
|
Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers |
ASTM D 4748 : 2010 : R2020
|
Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar |
ASTM F 1953 : 2010 : R2018
|
Standard Guide for Construction and Maintenance of Grass Tennis Courts |
ASTM D 8169/D8169M : 2018
|
Standard Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load |
ASTM D 420 : 2018
|
Standard Guide for Site Characterization for Engineering Design and Construction Purposes |
ASTM D 8198 : 2018
|
Standard Specification for Hydraulically Applied 100 % Wood Fiber Mulches |
ASTM D 1557 : 2012 : R2021
|
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) |
ASTM D 6033 : 2016
|
Standard Guide for Describing the Functionality of a Groundwater Modeling Code |
ASTM D 5608 : 2016
|
Standard Practices for Decontamination of Sampling and Non Sample Contacting Equipment Used at Low Level Radioactive Waste Sites |
ASTM D 5874 : 2016
|
Standard Test Methods for Determination of the Impact Value (IV) of a Soil |
ASTM D 5080 : 2020
|
Standard Test Method for Rapid Determination of Percent Compaction |
ASTM D 3550/D3550M : 2017
|
Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils |
ASTM D 6027/D6027M : 2015
|
Standard Practice for Calibrating Linear Displacement Transducers for Geotechnical Purposes |
ASTM D 6169/D6169M : 2013
|
Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations |
ASTM D 5084 : 2016 : REV A
|
Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter |
ASTM D 4106 : 2020
|
Standard Practice for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method |
ASTM D 4511 : 2011 : R2020
|
Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat |
ASTM D 6235 : 2018
|
Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites |
ASTM D 5610 : 1994 : R2014
|
Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling (Withdrawn 2023) |
ASTM D 8053 : 2018
|
Standard Guide for Data Management and Reporting Associated with Oil and Gas Development Involving Hydraulic Fracturing |
ASTM D 7367 : 2019 : EDT 2
|
Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting |
ASTM E 2856 : 2013 : R2021
|
Standard Guide for Estimation of LNAPL Transmissivity |
ASTM D 425 : 2017
|
Standard Test Method for Centrifuge Moisture Equivalent of Soils |
ASTM D 4535 : 2021
|
Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer |
ASTM D 8006 : 2016
|
Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations |
ASTM D 5715 : 2014
|
Standard Practice for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method) |
ASTM F 2536 : 2017
|
Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs |
ASTM D 4491/D4491M : 2021
|
Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
ASTM D 4506 : 2013 : EDT 1
|
Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test |
ASTM D 6528 : 2017
|
Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils |
ASTM D 4395 : 2017
|
Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method |
ASTM D 5982 : 2015
|
Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method) (Withdrawn 2024) |
ASTM D 6391 : 2011 : R2020
|
Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration |
ASTM D 6026 : 2021
|
Standard Practice for Using Significant Digits and Data Records in Geotechnical Data |
ASTM D 5922 : 2018
|
Standard Guide for Analysis, Interpretation, and Modeling of Spatial Variation in Geostatistical Site Investigations |
ASTM D 4092 : 2007 : R2013
|
Standard Terminology for Plastics: Dynamic Mechanical Properties |
ASTM D 4380 : 2020
|
Standard Test Method for Determining Density of Construction Slurries |
ASTM D 6276 : 2019
|
Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization |
ASTM D 7099 : 2004 : R2018
|
Standard Terminology Relating to Frozen Soil and Rock |
ASTM D 4050 : 2020
|
Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems |
ASTM D 5981/D5981M : 2018
|
Standard Guide for Calibrating a Groundwater Flow Model Application |
ASTM D 5299/D5299M : 2018
|
Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities |
ASTM D 4719 : 2020
|
Standard Test Methods for Prebored Pressuremeter Testing in Soils |
ASTM D 7322/D7322M : 2017
|
Standard Test Method for Determination of Erosion Control Product (ECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions |
ASTM D 6170 : 2017
|
Standard Guide for Selecting a Groundwater Modeling Code |
ASTM D 4542 : 2015
|
Standard Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer |
ASTM D 6634/D6634M : 2014
|
Standard Guide for the Selection of Purging and Sampling Devices for Groundwater Monitoring Wells (Withdrawn 2023) |
ASTM D 5321/D5321M : 2021
|
Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear |
ASTM D 8215 : 2020
|
Standard Practice for Statistical Modeling of Uncertainty in Assessment of In-place Coal Resources |
ASTM D 4428/D4428M : 2014
|
Standard Test Methods for Crosshole Seismic Testing (Withdrawn 2023) |
ASTM D 854 : 2014
|
Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023) |
ASTM D 2488 : 2017 : EDT 1
|
Standard Practice for Description and Identification of Soils (Visual-Manual Procedures) |
ASTM D 7765 : 2018 : REV A
|
Standard Practice for Use of Foundry Sand in Structural Fill and Embankments |
ASTM D 4959 : 2016
|
Standard Test Method for Determination of Water Content of Soil By Direct Heating |
ASTM D 2844/D2844M : 2018
|
Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils |
ASTM D 5979 : 1996 : R2019 : EDT 1
|
Standard Guide for Conceptualization and Characterization of Groundwater Systems |
ASTM D 7880/D7880M : 2013
|
Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag (Withdrawn 2022) |
ASTM D 5493 : 2006 : R2016
|
Standard Test Method for Permittivity of Geotextiles Under Load |
ASTM D 8404 : 2021
|
Standard Practice for Preparation of Soil Samples by Ammonium Bifluoride-Nitric Acid Digestion for Subsequent Analysis for Metals and Metalloids |
ASTM D 8408/D8408M : 2021
|
Standard Guide for Development of Long-Term Monitoring Plans for Vapor Mitigation Systems |
ASTM D 6232 : 2021
|
Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities |
ASTM D 4506 : 2021
|
Standard Test Method for Determining In Situ Modulus of Deformation of a Rock Mass Using the Radial Jacking Test |
ASTM D 8215 : 2021
|
Standard Practice for Statistical Modeling of Uncertainty in Assessment of In-place Coal Resources |
ASTM D 6640 : 2021
|
Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations |
ASTM D 4092 : 2021
|
Standard Terminology for Plastics: Dynamic Mechanical Properties |
ASTM D 6467 : 2021
|
Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Fine-Grained Soils |
ASTM D 5195 : 2021
|
Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods |