ASTM D 653 : 2024 : REV A
Current
Current
The latest, up-to-date edition.
Standard Terminology Relating to Soil, Rock, and Contained Fluids
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
15-07-2024
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 18
|
| DocumentType |
Reference Material
|
| Pages |
50
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These definitions apply to many terms found in the Terminology section of standards of ASTM Committee D18.
1.2This terminology standard defines terms related to soil, rock, and contained fluids found in the various sections of standards under the jurisdiction of ASTM Committee D18.
1.3Definitions of terms relating to frozen soils are contained in Terminology D7099.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 7928 : 2021 : EDT 1 | Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis |
| ASTM D 7503 : 2018 | Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils |
| ASTM D 8123 : 2022 | Standard Test Methods for Measuring the Opening Size of Geohazard Nettings |
| ASTM D 8281/D8281M : 2021 | Standard Test Method for Determining the Presence of Expanding Clays in Rock for Erosion Control Using Ethylene Glycol |
| ASTM D 6724/D6724M : 2016 : R2024 : EDT 1 | Standard Guide for Installation of Direct Push Groundwater Monitoring Wells |
| ASTM D 4083 : 1989 : R2016 | Standard Practice for Description of Frozen Soils (Visual-Manual Procedure) |
| ASTM D 6031/D6031M : 2024 | Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes |
| ASTM D 5875/D5875M : 2018 | Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices |
| ASTM D 5521/D5521M : 2018 | Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers |
| ASTM D 5220/D5220M : 2021 | Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method |
| ASTM D 5850 : 2020 | Standard Practice for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells |
| ASTM D 3282 : 2024 | Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes |
| ASTM D 3966/D3966M : 2022 | Standard Test Methods for Deep Foundation Elements Under Static Lateral Load |
| ASTM D 7299 : 2020 | Standard Practice for Verifying Performance of a Vertical Inclinometer Probe |
| ASTM D 7262 : 2023 | Standard Test Methods for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids |
| ASTM D 5268 : 2023 | Standard Specification for Topsoil Used for Landscaping and Construction Purposes |
| ASTM D 6029/D6029M : 2020 | Standard Practice for (Analytical Procedures) Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method |
| ASTM D 4491/D4491M : 2022 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 4543 : 2019 | Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances |
| ASTM D 6773 : 2022 | Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester |
| ASTM D 6473/D6473M : 2024 | Standard Test Method for Specific Gravity and Absorption of Rock for Erosion Control |
| ASTM D 5978/D5978M : 2016 : R2024 | Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells |
| ASTM D 7458 : 2021 | Standard Test Method for Determination of Beryllium in Soil and Sediment Using Ammonium Bifluoride Extraction and Fluorescence Detection |
| ASTM D 3385 : 2018 | Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer |
| ASTM D 4611 : 2016 | Standard Test Method for Specific Heat of Rock and Soil |
| ASTM D 6725/D6725M : 2016 : R2024 : EDT 1 | Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers |
| ASTM D 6285 : 1999 : R2016 | Standard Guide for Locating Abandoned Wells |
| ASTM D 6572 : 2021 | Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test |
| ASTM D 2435/D2435M : 2011 : R2020 | Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading |
| ASTM D 7986 : 2017 : REV A | Standard Practice for Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing |
| ASTM D 8460 : 2022 | Standard Test Method for Quantification of Volatile Organic Compounds Using Proton Transfer Reaction Mass Spectrometry |
| ASTM D 6820 : 2020 | Standard Guide for Use of the Time Domain Electromagnetic Method for Geophysical Subsurface Site Investigation |
| ASTM D 5447 : 2017 | Standard Guide for Application of a Numerical Groundwater Flow Model to a Site-Specific Problem |
| ASTM D 6028/D6028M : 2020 | Standard Practice for (Analytical Procedure) Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method |
| ASTM D 5473/D5473M : 2020 | Standard Practice for (Analytical Procedures) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer |
| ASTM D 5549 : 2019 | Standard Guide for Contents of Geostatistical Site Investigation Report |
| ASTM D 5778 : 2020 | Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils |
| ASTM D 5195 : 2021 | Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods |
| ASTM D 7351/D7351M : 2021 | Standard Test Method for Determination of Sediment Retention Device (SRD) Effectiveness in Sheet Flow Applications |
| ASTM D 5745 : 2023 | Standard Guide for Developing and Implementing Interim and Early Actions for Waste Contamination Site Remediation |
| ASTM D 2976 : 2022 : REV A | Standard Test Method for pH of Peat Materials |
| ASTM D 6146 : 1997 : R2018 | Standard Guide for Monitoring Aqueous Nutrients in Watersheds |
| ASTM D 558/D558M : 2019 | Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures |
| ASTM D 7759/D7759M : 2021 | Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration |
| ASTM D 7382 : 2020 | Standard Test Methods for Determination of Maximum Dry Unit Weight of Granular Soils Using a Vibrating Hammer |
| ASTM D 5102/D5102M : 2024 | Standard Test Methods for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures |
| ASTM D 4452/D4452M : 2022 | Standard Practice for X-Ray Radiography of Soil Samples |
| ASTM D 6462 : 2019 | Standard Practice for Silt Fence Installation and Maintenance |
| ASTM D 6598 : 2019 | Standard Guide for Installing and Operating Settlement Points for Monitoring Vertical Deformations |
| ASTM D 6771 : 2021 | Standard Practice for Low-Flow Purging and Sampling Used for Groundwater Monitoring |
| ASTM D 7383 : 2019 | Standard Test Methods for Axial Rapid Load (Compressive Force Pulse) Testing of Deep Foundations |
| ASTM D 5609 : 2016 | Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling |
| ASTM D 3213 : 2019 | Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil |
| ASTM D 5782 : 2018 | Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices |
| ASTM D 7758 : 2017 | Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations |
| ASTM D 5240/D5240M : 2020 | Standard Test Method for Evaluation of the Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate |
| ASTM D 2216 : 2019 | Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
| ASTM D 4971 : 2016 | Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack |
| ASTM D 6517 : 2018 : R2023 | Standard Guide for Field Preservation of Ground Water Samples |
| ASTM D 8199 : 2020 | Standard Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control |
| ASTM D 4043 : 2017 | Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques |
| ASTM D 4553 : 2018 | Standard Test Method for Determining In Situ Creep Characteristics of Rock |
| ASTM D 6910/D6910M : 2019 | Standard Test Method for Marsh Funnel Viscosity of Construction Slurries |
| ASTM D 4542 : 2022 | Standard Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer |
| ASTM D 8082 : 2018 : R2024 : EDT 1 | Standard Specification for Elemental Impurity Limits in Erosion Control Products used for Land Application |
| ASTM D 5088 : 2020 | Standard Practice for Decontamination of Field Equipment Used at Waste Sites |
| ASTM F 2747 : 2019 | Standard Guide for Construction of Sand-based Rootzones for Golf Putting Greens and Tees |
| ASTM D 7608 : 2018 : EDT 1 | Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils |
| ASTM D 1997 : 2020 | Standard Test Method for Laboratory Determination of the Fiber Content of Peat and Organic Soils by Dry Mass |
| ASTM D 2434 : 2022 | Standard Test Methods for Measurement of Hydraulic Conductivity of Coarse-Grained Soils |
| ASTM D 8328 : 2024 | Standard Test Method for Dynamic Testing of Powders Using the Freeman Technology FT4 Powder Rheometer |
| ASTM D 7276 : 2016 : R2023 | Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow |
| ASTM D 7014 : 2022 | Standard Practice for Installation of Double-Twisted Wire Mesh Gabions and Revet Mattresses |
| ASTM D 7481 : 2018 | Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder |
| ASTM D 5493 : 2023 | Standard Test Method for Permittivity of Geotextiles Under Load |
| ASTM F 480 : 2014 : R2022 | Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 |
| ASTM D 7048 : 2016 | Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs |
| ASTM D 5121 : 2022 | Standard Practice for Preparation of Rock Slabs for Durability Testing |
| ASTM D 6459 : 2019 | Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion |
| ASTM D 8295 : 2019 | Standard Test Method for Determination of Shear Wave Velocity and Initial Shear Modulus in Soil Specimens using Bender Elements |
| ASTM D 4394 : 2017 | Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method |
| ASTM D 7099 : 2004 : R2018 | Standard Terminology Relating to Frozen Soil and Rock |
| ASTM D 4050 : 2020 | Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems |
| ASTM D 4531 : 2023 | Standard Test Methods for Bulk and Dry Density of Peat and Peat Products |
| ASTM D 5981/D5981M : 2018 | Standard Guide for Calibrating a Groundwater Flow Model Application |
| ASTM D 5299/D5299M : 2018 | Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities |
| ASTM D 4719 : 2020 | Standard Test Methods for Prebored Pressuremeter Testing in Soils |
| ASTM D 4753 : 2024 | Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing |
| ASTM D 6170 : 2017 | Standard Guide for Selecting a Groundwater Modeling Code |
| ASTM D 5321/D5321M : 2021 | Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear |
| ASTM D 5874 : 2024 | Standard Test Methods for Determination of the Impact Value (IV) of a Soil |
| ASTM D 6102 : 2023 | Standard Guide for Installation of Geosynthetic Clay Liners |
| ASTM D 5334 : 2022 : REV A : EDT 1 | Standard Test Method for Determination of Thermal Conductivity of Soil and Rock by Thermal Needle Probe Procedure |
| ASTM D 8459 : 2023 | Standard Test Methods for Detecting Water Soluble Sulfates in Construction Soils |
| ASTM D 4647/D4647M : 2013:R2020 | Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test |
| ASTM D 6027/D6027M : 2024 | Standard Practice for Calibration/Verification of Linear Displacement Transducers for Geotechnical Purposes |
| ASTM D 4404 : 2018 | Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry |
| ASTM D 4793 : 2009 : R2023 | Standard Test Method for Sequential Batch Extraction of Waste with Water |
| ASTM D 7338 : 2014 : R2023 | Standard Guide for Assessment Of Fungal Growth in Buildings |
| ASTM D 5141 : 2023 | Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device |
| ASTM D 6312 : 2017 | Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs at Waste Disposal Facilities |
| ASTM D 1143/D1143M : 2020 : EDT 1 | Standard Test Methods for Deep Foundation Elements Under Static Axial Compressive Load |
| ASTM D 7626 : 2019 : EDT 1 | Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay |
| ASTM D 5312/D5312M : 2021 | Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions |
| ASTM D 4648/D4648M : 2024 | Standard Test Methods for Laboratory Miniature Vane Shear Test for Saturated Fine-Grained Soil |
| ASTM D 7762 : 2018 : EDT 1 | Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash |
| ASTM D 5879/D5879M : 2018 | Standard Practice for Surface Site Characterization for On-Site Septic Systems |
| ASTM D 7322/D7322M : 2023 | Standard Test Method for Determination of Erosion Control Product (ECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions |
| ASTM D 5716/D5716M : 2020 | Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir |
| ASTM D 8381/D8381M : 2021 | Standard Test Methods for Measuring the Depth of Deep Foundations by Parallel Seismic Logging |
| ASTM D 5783 : 2018 | Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices |
| ASTM D 7702/D7702M : 2014 : R2021 | Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics |
| ASTM D 4254 : 2016 | Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density |
| ASTM D 6092 : 2021 | Standard Practice for Specifying Standard Sizes of Stone for Erosion Control |
| ASTM D 8038 : 2016 : R2022 : EDT 1 | Standard Practice for Reclamation of Recycled Aggregate Base (RAB) Material |
| ASTM D 5270/D5270M : 2020 | Standard Practice for (Analytical Procedures) Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers |
| ASTM D 4219 : 2022 | Standard Test Method for Short-Term Unconfined Compressive Strength Index of Chemically Grouted Soils |
| ASTM D 7070 : 2016 | Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature |
| ASTM D 6067/D6067M : 2017 | Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization and Estimation of Hydraulic Conductivity |
| ASTM D 2488 : 2017 : EDT 1 | Standard Practice for Description and Identification of Soils (Visual-Manual Procedures) |
| ASTM D 7765 : 2018 : REV A | Standard Practice for Use of Foundry Sand in Structural Fill and Embankments |
| ASTM D 6232 : 2021 | Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities |
| ASTM D 5979 : 1996 : R2019 : EDT 1 | Standard Guide for Conceptualization and Characterization of Groundwater Systems |
| ASTM D 4729 : 2019 | Standard Test Method for In Situ Stress and Modulus of Deformation Using the Flat Jack Method |
| ASTM D 5785/D5785M : 2020 | Standard Practice for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test) |
| ASTM D 8167/D8167M : 2023 : EDT 1 | Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth) |
| ASTM D 6431 : 2018 | Standard Guide for Using the Direct Current Resistivity Method for Subsurface Site Characterization |
| ASTM D 4623 : 2016 | Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge |
| ASTM F 2107 : 2008 : R2020 | Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields |
| ASTM D 6023 : 2016 | Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM) |
| ASTM D 7069 : 2024 | Standard Guide for Field Quality Assurance in a Groundwater Sampling Event |
| ASTM D 5731 : 2016 | Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications |
| ASTM D 8202 : 2018 : R2024 | Standard Specification for Hydraulically Applied 100% Wheat Straw Fiber Mulches |
| ASTM D 5779/D5779M : 2024 | Standard Test Method for Field Determination of Rapid Specific Gravity of Rock and Manmade Materials for Erosion Control |
| ASTM D 8151 : 2019 : EDT 1 | Standard Practice for Obtaining Rainfall Runoff from Unvegetated Rolled and Hydraulic Erosion Control Products (RECPs and HECPs) for Acute Ecotoxicity Testing |
| ASTM D 6683 : 2019 | Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress |
| ASTM D 5787 : 2020 | Standard Practice for Monitoring Well Protection At or Near Land Surface |
| ASTM D 7499/D7499M : 2009 : R2023 | Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness |
| ASTM F 1759 : 1997 : R2018 | Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications |
| ASTM D 8170 : 2020 | Standard Guide for Using Disposable Handheld Soil Core Samplers for the Collection and Storage of Soil for Volatile Organic Analysis |
| ASTM D 6836 : 2016 | Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge |
| ASTM D 7400/D7400M : 2019 | Standard Test Methods for Downhole Seismic Testing |
| ASTM D 2980 : 2017 : EDT 1 | Standard Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials |
| ASTM D 6032/D6032M : 2017 | Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core |
| ASTM D 4546 : 2021 | Standard Test Methods for One-Dimensional Swell or Collapse of Soils |
| ASTM D 8037/D8037M : 2016 | Standard Practice for Direct Push Hydraulic Logging for Profiling Variations of Permeability in Soils |
| ASTM D 5876/D5876M : 2017 : R2024 | Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices |
| ASTM D 4959 : 2024 | Standard Test Method for Determination of Water Content of Soil By Direct Heating |
| ASTM D 6274 : 2018 | Standard Guide for Conducting Borehole Geophysical Logging - Gamma |
| ASTM D 6429 : 2023 | Standard Guide for Selecting Surface Geophysical Methods |
| ASTM D 6243/D6243M : 2020 | Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method |
| ASTM D 4223/D4223M : 2020 | Standard Practices for Preparation of Test Specimens of Asphalt-Stabilized Soils |
| ASTM D 5924 : 2018 : REDLINE | Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations |
| ASTM E 2278 : 2013 : R2019 | Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage |
| ASTM D 3441 : 2016 | Standard Test Method for Mechanical Cone Penetration Testing of Soils |
| ASTM E 3183 : 2024 | Standard Guide for Harvesting Coal Combustion Products Stored in Active and Inactive Storage Areas for Beneficial Use |
| ASTM D 4914/D4914M : 2016 | Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit |
| ASTM D 4506 : 2021 | Standard Test Method for Determining In Situ Modulus of Deformation of a Rock Mass Using the Radial Jacking Test |
| ASTM D 1632 : 2017 : EDT 1 | Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory |
| ASTM D 2487 : 2017 : EDT 1 | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM D 5030/D5030M : 2021 | Standard Test Methods for Density of In-Place Soil and Rock Materials by the Water Replacement Method in a Test Pit |
| ASTM D 5202/D5202M : 2016 | Standard Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils |
| ASTM D 5780 : 2018 | Standard Test Methods for Individual Piles in Permafrost Under Static Axial Compressive Load |
| ASTM D 5995 : 2018 | Standard Guide for Environmental Site Investigation in Cold Regions |
| ASTM D 1452/D1452M : 2024 | Standard Practice for Soil Exploration and Sampling by Auger Borings |
| ASTM D 5550 : 2023 | Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer |
| ASTM D 8215 : 2021 | Standard Practice for Statistical Modeling of Uncertainty in Assessment of In-place Coal Resources |
| ASTM D 5313/D5313M : 2021 | Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions |
| ASTM D 7699/D7699M : 2020 | Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites |
| ASTM D 4403 : 2020 | Standard Practice for Extensometers Used in Rock |
| ASTM D 7698 : 2021 | Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method |
| ASTM D 5912 : 2020 | Standard Practice for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug) |
| ASTM D 8200 : 2022 | Standard Practice for Creating a Correlation to Compare Particle Size Distribution Results of Proppants by Dynamic Imaging Analyzers and Sieves |
| ASTM D 698 : 2012 : R2021 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>)) |
| ASTM D 8327 : 2024 | Standard Test Method for Measuring the Permeability of Powders as a Function of Consolidation Using the Freeman Technology FT4 Powder Rheometer |
| ASTM D 1633 : 2017 | Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders |
| ASTM D 6467 : 2021 : EDT 1 | Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Fine-Grained Soils |
| ASTM D 5744 : 2018 : R2024 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
| ASTM D 6564/D6564M : 2017 : R2024 | Standard Guide for Field Filtration of Groundwater Samples |
| ASTM D 6760 : 2016 | Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing |
| ASTM D 5753 : 2018 | Standard Guide for Planning and Conducting Geotechnical Borehole Geophysical Logging |
| ASTM D 5092/D5092M : 2016 : R2024 | Standard Practice for Design and Installation of Groundwater Monitoring Wells |
| ASTM D 6169/D6169M : 2021 | Standard Guide for Selection of Subsurface Soil and Rock Sampling Devices for Environmental and Geotechnical Investigations |
| ASTM D 6914/D6914M : 2016 : R2024 | Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices |
| ASTM D 7664 : 2010 : R2018 : EDT 1 | Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils |
| ASTM D 5882 : 2016 | Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations |
| ASTM D 4105/D4105M : 2020 | Standard Practice for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method |
| ASTM D 4644 : 2016 | Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks |
| ASTM D 2166/D2166M : 2024 | Standard Test Method for Unconfined Compressive Strength of Cohesive Soil |
| ASTM D 2978 : 2023 | Standard Test Method for Volume of Peat and Peat-Based Growing Media |
| ASTM D 5520 : 2018 | Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression |
| ASTM D 5786 : 2017 | Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems |
| ASTM D 7181 : 2020 | Standard Test Method for Consolidated Drained Triaxial Compression Test for Soils |
| ASTM D 4696 : 2018 | Standard Guide for Pore-Liquid Sampling from the Vadose Zone |
| ASTM D 7208 : 2023 | Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion |
| ASTM D 6766 : 2020 : REV A | Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions |
| ASTM D 4630 : 2019 | Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test |
| ASTM E 3355 : 2023 | Standard Guide for Characterization of Coal Combustion Products (CCPs) in Storage Area(s) for Beneficial Use |
| ASTM D 7560 : 2022 | Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs) |
| ASTM D 7929 : 2020 | Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells |
| ASTM D 7100 : 2011 : R2020 | Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions |
| ASTM D 7880/D7880M : 2022 | Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag |
| ASTM D 4015 : 2021 | Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices |
| ASTM D 7367/D7367M : 2022 | Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting |
| ASTM D 6167 : 2019 | Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper |
| ASTM D 4380 : 2020 | Standard Test Method for Determining Density of Construction Slurries |
| ASTM D 6640 : 2021 | Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations |
| ASTM D 8262 : 2022 | Standard Test Method for Determining the pH of Granular Material for Use in Embankments, Subgrades, and Retaining Wall Backfil |
| ASTM D 6276 : 2019 | Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization |
| ASTM D 4395 : 2017 | Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method |
| ASTM D 5887/D5887M : 2023 | Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter |
| ASTM D 6026 : 2021 | Standard Practice for Using Significant Digits and Data Records in Geotechnical Data |
| ASTM D 6391 : 2011 : R2020 | Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration |
| ASTM D 5922 : 2018 | Standard Guide for Analysis, Interpretation, and Modeling of Spatial Variation in Geostatistical Site Investigations |
| ASTM D 8512 : 2023 | Standard Practice for Preliminary Karst Terrain Assessment for Site Development |
| ASTM D 1140 : 2017 | Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing |
| ASTM D 4092 : 2021 | Standard Terminology for Plastics: Dynamic Mechanical Properties |
| ASTM D 8012 : 2018 | Standard Practice for Reclamation of Scrap and Waste Asphalt Shingles to Produce Reclaimed Asphalt Shingles (RAS) for Use in Transportation Applications |
| ASTM D 559/D559M : 2015 : R2023 | Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures |
| ASTM D 4318 : 2017 : EDT 1 | Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils |
| ASTM D 7352 : 2018 | Standard Practice for Volatile Contaminant Logging Using a Membrane Interface Probe (MIP) in Unconsolidated Formations with Direct Push Methods |
| ASTM D 6938 : 2023 | Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) |
| ASTM D 4612 : 2016 | Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil |
| ASTM D 7015/D7015M : 2018 | Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils |
| ASTM D 6393/D6393M : 2021 | Standard Test Method for Bulk Solids Characterization by Carr Indices |
| ASTM D 7045 : 2017 | Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for Waste Disposal Facilities |
| ASTM F 2536 : 2017 : R2022 | Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs |
| ASTM D 8122 : 2021 | Standard Test Method for Determining Mass per Unit Area of Geohazard Nettings |
| ASTM E 2531 : 2006 : R2020 | Standard Guide for Development of Conceptual Site Models and Remediation Strategies for Light Nonaqueous-Phase Liquids Released to the Subsurface |
| ASTM D 4427 : 2023 | Standard Classification of Peat Samples by Laboratory Testing |
| ASTM D 3551 : 2017 | Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer |
| ASTM D 2573/D2573M : 2018 | Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils |
| ASTM D 7012 : 2023 | Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures |
| ASTM D 4373 : 2021 | Standard Test Method for Rapid Determination of Carbonate Content of Soils |
| ASTM D 2974 : 2020 : EDT 1 | Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils |
| ASTM D 8198 : 2018 : R2024 | Standard Specification for Hydraulically Applied 100 % Wood Fiber Mulches |
| ASTM E 2856 : 2013 : R2021 | Standard Guide for Estimation of LNAPL Transmissivity |
| ASTM D 2850 : 2024 | Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils |
| ASTM D 4832/D4832M : 2023 | Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Cylindrical Test Specimens |
| ASTM D 5255 : 2015 : R2023 | Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock |
| ASTM D 4535 : 2021 | Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer |
| ASTM D 7663 : 2012 : R2024 | Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations |
| ASTM D 4943 : 2018 : R2024 | Standard Test Method for Shrinkage Factors of Cohesive Soils by the Water Submersion Method |
| ASTM D 6711/D6711M : 2022 | Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses |
| ASTM E 2277 : 2014(R2019) | Standard Guide for Design and Construction of Coal Ash Structural Fills |
| ASTM D 7760 : 2018 | Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter |
| ASTM D 7780 : 2020 | Standard Practice for Minimum Geospatial Data for Representing Coal Mining Features |
| ASTM D 5878 : 2019 | Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes |
| ASTM D 806 : 2019 | Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures |
| ASTM D 7858 : 2013 : R2018 | Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry |
| ASTM D 5567 : 1994 : R2018 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 586 : 2023 | Standard Test Method for Ash and Organic Matter Content of Degradable Erosion Control Products |
| ASTM D 7128 : 2018 | Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation |
| ASTM D 2944 : 2022 | Standard Practice of Sampling Processed Peat Materials for Horticultural Purposes |
| ASTM D 7277 : 2016 : R2023 | Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow |
| ASTM D 6088 : 2006 : R2022 | Standard Practice for Installation of Geocomposite Pavement Drains |
| ASTM D 8153 : 2022 | Standard Test Method for Determination of Soil Water Contents Using a Dielectric Permittivity Probe |
| ASTM D 5101 : 2023 | Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
| ASTM D 7243 : 2011 : R2020 | Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges |
| ASTM D 4186/D4186M : 2020 : EDT 2 | Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading |
| ASTM D 8006 : 2024 | Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations |
| ASTM D 5472/D5472M : 2020 | Standard Practice for Determining Specific Capacity and Estimating Transmissivity at the Control Well |
| ASTM D 8232 : 2018 | Standard Test Procedures for Measuring the Inclination of Deep Foundations |
| ASTM D 854 : 2023 | Standard Test Methods for Specific Gravity of Soil Solids by the Water Displacement Method |
| ASTM D 8299 : 2019 | Standard Guide for Using Metal Ratios in Soils to Distinguish Between Anthropogenic and Natural Beryllium |
| ASTM D 6519/D6519M : 2023 | Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler |
| ASTM D 1634 : 2017 | Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method) |
| ASTM D 2844/D2844M : 2018 : EDT 1 | Standard Test Method for Resistance <emph type="bdit">R</emph>-Value and Expansion Pressure of Compacted Soils |
| ASTM D 4829 : 2021 | Standard Test Method for Expansion Index of Soils |
| ASTM D 8404 : 2021 | Standard Practice for Preparation of Soil Samples by Ammonium Bifluoride-Nitric Acid Digestion for Subsequent Analysis for Metals and Metalloids |
| ASTM D 6103/D6103M : 2017 : EDT 1 | Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM) |
| ASTM D 7272 : 2006 : R2023 | Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Premanufactured Taped Methods |
| ASTM D 6825 : 2021 | Standard Guide for Placement of Riprap Revetments |
| ASTM D 4381 : 2022 | Standard Test Method for Sand Content by Volume of Construction Slurries |
| ASTM D 6940/D6940M : 2020 | Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids |
| ASTM D 3689/D3689M : 2022 | Standard Test Methods for Deep Foundation Elements Under Static Axial Tensile Load |
| ASTM D 7830/D7830M : 2014 : R2021 : EDT 1 | Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge |
| ASTM D 6758 : 2018 : EDT 1 | Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method |
| ASTM D 5855/D5855M : 2020 | Standard Practice for (Analytical Procedure) Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well |
| ASTM D 7891 : 2024 | Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell |
| ASTM D 4944 : 2018 | Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester |
| ASTM D 6727/D6727M : 2016 | Standard Guide for Conducting Borehole Geophysical Logging—Neutron |
| ASTM D 5284 : 2009 : R2023 | Standard Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid |
| ASTM D 8408/D8408M : 2021 | Standard Guide for Development of Long-Term Monitoring Plans for Vapor Mitigation Systems |
| ASTM D 6475 : 2017 | Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets |
| ASTM D 3740 : 2023 | Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
| ASTM D 6639 : 2018 | Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Site Characterizations |
| ASTM D 560/D560M : 2016 | Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures |
| ASTM D 5298 : 2016 | Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper |
| ASTM D 1635/D1635M : 2019 | Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading |
| ASTM D 5872/D5872M : 2018 | Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices |
| ASTM D 6024/D6024M : 2016 | Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application |
| ASTM D 5233 : 1992 : R2023 | Standard Test Method for Single Batch Extraction Method for Wastes |
| ASTM D 5126 : 2016 : EDT 1 | Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone |
| ASTM D 6430 : 2018 | Standard Guide for Using the Gravity Method for Subsurface Site Characterization |
| ASTM D 8297/D8297M : 2023 | Standard Test Method for Determination of Erosion Control Products (ECP) Performance in Protecting Slopes from Sequential Rainfall-Induced Erosion Using a Tilted Bed Slope |
| ASTM F 1668 : 2016 : R2022 | Standard Guide for Construction Procedures for Buried Plastic Pipe |
| ASTM D 6128 : 2022 | Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester |
| ASTM D 2936 : 2020 | Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens |
| ASTM D 6001/D6001M : 2020 | Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization |
| ASTM D 4544 : 2020 : R2024 | Standard Practice for Estimating Peat Deposit Thickness |
| ASTM D 4520 : 2018 | Standard Practice for Determining Water Injectivity Through the Use of On-Site Floods |
| ASTM D 5607 : 2016 | Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force |
| ASTM D 6234 : 2013 : R2020 | Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure |
| ASTM D 4633 : 2016 | Standard Test Method for Energy Measurement for Dynamic Penetrometers |
| ASTM D 5881 : 2020 | Standard Practice for (Analytical Procedures) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug) |
| ASTM D 8359 : 2021 | Standard Test Method for Determining the In Situ Rock Deformation Modulus and Other Associated Rock Properties Using a Flexible Volumetric Dilatometer |
| ASTM D 6706 : 2001 : R2021 | Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil |
| ASTM D 7013/D7013M : 2023 | Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges |
| ASTM D 5923 : 2018 | Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations |
| ASTM D 5971/D5971M : 2016 | Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material |
| ASTM D 2419 : 2022 | Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
| ASTM D 6141 : 2018 : R2022 | Standard Guide for Screening Clay Portion and Index Flux of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids |
| ASTM D 4631 : 2018 | Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique |
| ASTM D 7047 : 2023 | Standard Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium) |
| ASTM D 6941 : 2019 | Standard Practice for Measuring Fluidization Segregation Tendencies of Powders |
| ASTM D 7764 : 2020 | Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers |
| ASTM D 5777 : 2018 | Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation |
| ASTM D 4643 : 2017 | Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating |
| ASTM D 8296 : 2019 | Standard Test Method for Consolidated Undrained Cyclic Direct Simple Shear Test under Constant Volume with Load Control or Displacement Control |
| ASTM D 6780/D6780M : 2019 | Standard Test Methods for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR) |
| ASTM D 8571 : 2024 | Standard Practice for Detection of Hydrocarbon Liquids in Soils by Fluorescence with an Optical Imaging Profiler Using Direct Push Methods |
| ASTM D 4767 : 2011 : R2020 | Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils |
| ASTM D 4253 : 2016 : EDT 1 | Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
| ASTM D 6286/D6286M : 2020 | Standard Guide for Selection of Drilling and Direct Push Methods for Geotechnical and Environmental Subsurface Site Characterization |
| ASTM E 1676 : 2012 : R2021 | Standard Guide for Conducting Laboratory Soil Toxicity or Bioaccumulation Tests with the Lumbricid Earthworm <emph type="ital">Eisenia Fetida</emph > and the Enchytraeid Potworm <emph type="ital">Enchytraeus albidus</emph > |
| ASTM D 1586/D1586M : 2018 : EDT 1 | Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils |
| ASTM D 3080/D3080M : 2023 | Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions |
| ASTM D 4748 : 2010 : R2020 | Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar |
| ASTM D 6913/D6913M : 2017 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 7625 : 2022 | Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Abrasiveness Index Method |
| ASTM F 1953 : 2010 : R2018 | Standard Guide for Construction and Maintenance of Grass Tennis Courts |
| ASTM D 8081 : 2017 : R2021 : EDT 1 | Standard Guide for Theory and Principles for Obtaining Reliable and Accurate Bulk Solids Flow Data Using a Direct Shear Cell |
| ASTM D 6033 : 2016 | Standard Guide for Describing the Functionality of a Groundwater Modeling Code |
| ASTM D 5608 : 2016 | Standard Practices for Decontamination of Sampling and Non Sample Contacting Equipment Used at Low Level Radioactive Waste Sites |
| ASTM D 5080 : 2020 | Standard Test Method for Rapid Determination of Percent Compaction |
| ASTM D 8169/D8169M : 2018 | Standard Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load |
| ASTM D 6452 : 2018 : R2023 | Standard Guide for Purging Methods for Wells Used for Ground Water Quality Investigations |
| ASTM D 420 : 2018 | Standard Guide for Site Characterization for Engineering Design and Construction Purposes |
| ASTM D 5920/D5920M : 2020 | Standard Practice for (Analytical Procedure) Tests of Anisotropic Unconfined Aquifers by Neuman Method |
| ASTM D 3839 : 2014 : R2019 | Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe |
| ASTM D 1557 : 2012 : R2021 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 3550/D3550M : 2017 | Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils |
| ASTM D 8249 : 2019 : R2024 | Standard Practice for Use of Rotary Kiln Produced Porous Ceramic as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes |
| ASTM D 5084 : 2016 : REV A | Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter |
| ASTM E 2993 : 2023 | Standard Guide for Evaluating Potential Hazard in Buildings as a Result of Methane in the Vadose Zone |
| ASTM D 6826 : 2023 | Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills |
| ASTM D 4106 : 2020 | Standard Practice for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method |
| ASTM D 4511 : 2011 : R2020 | Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat |
| ASTM C 1127/C1127M : 2015 : R2023 | Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface |
| ASTM D 8053 : 2018 | Standard Guide for Data Management and Reporting Associated with Oil and Gas Development Involving Hydraulic Fracturing |
| ASTM D 5980 : 2016 : R2024 | Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring |
| ASTM D 5715 : 2023 | Standard Practice for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method) |
| ASTM D 4104/D4104M : 2020 | Standard Practice for (Analytical Procedures) Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests) |
| ASTM D 6235 : 2018 | Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites |
| ASTM D 8263/D8263M : 2023 | Standard Test Method for Determining the Change in Mass of Rolled Erosion Control Products When Submerged in Water |
| ASTM D 4992 : 2022 | Standard Practice for Evaluation of Rock to be Used for Erosion Control |
| ASTM D 6528 : 2024 | Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine-Grained Soils |
| ASTM D 2321 : 2020 | Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications |
| ASTM D 4221 : 2018 | Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer |
| ASTM D 8152 : 2018 | Standard Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test |
| ASTM D 8121/D8121M : 2023 | Standard Test Method for Approximating the Shear Strength of Cohesive Soils by the Handheld Vane Shear Device |
| ASTM D 6432 : 2019 | Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation |
| ASTM D 8107 : 2018 | Standard Practice for Determining Sediment Pond Skimmer Flow Rate |
| ASTM D 4945 : 2017 | Standard Test Method for High-Strain Dynamic Testing of Deep Foundations |
| ASTM D 8438/D8438M : 2023 | Standard Test Methods for Use of Hyperspectral Sensors for Soil Nutrient Analysis of Ground Based Samples |
| ASTM D 6684 : 2018 | Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Systems |
| ASTM D 5737/D5737M : 2019 | Standard Guide for Methods for Measuring Well Discharge |
| ASTM D 5858 : 1996 : R2020 | Standard Guide for Calculating <emph type="ital">In Situ</emph> Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory |
| ASTM D 1883 : 2021 | Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils |
| ASTM D 6230 : 2021 : EDT 1 | Standard Practices for Monitoring Earth or Structural Movement Using Inclinometers |
| ASTM D 7263 : 2021 | Standard Test Methods for Laboratory Determination of Density and Unit Weight of Soil Specimens |
| ASTM D 2977 : 2022 | Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes |
| ASTM D 3967 : 2023 | Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens with Flat Loading Platens |
| ASTM D 8298/D8298M : 2023 | Standard Test Method for Determination of Erosion Control Products (ECP) Performance in Protecting Slopes from Continuous Rainfall-Induced Erosion Using a Tilted Bed Slope |
| ASTM D 5611 : 1994 : R2016 | Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application |
| ASTM D 7300 : 2018 | Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain |
| ASTM D 8106 : 2017 | Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay |
| ASTM E 2243 : 2013 : R2019 | Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation |
| ASTM D 4718/D4718M : 2015 : R2023 | Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
| ASTM D 2973 : 2023 | Standard Test Method for Total Nitrogen in Peat Materials |
| ASTM D 8326 : 2021 | Standard Practice for Measurement of the Kinetic Energy of Simulated Rainfall |
| ASTM D 5084 : 2024 | Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.