ASTM D 6824 : 2013 : R2018
Current
The latest, up-to-date edition.
Standard Test Method for Determining Filterability of Aviation Turbine Fuel
Hardcopy , PDF
English
30-11-2018
This test method covers a procedure for determining the filterability of aviation turbine fuels (for other middle distillate fuels, see Test MethodD6426).
Committee |
D 02
|
DocumentType |
Test Method
|
Pages |
7
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
SupersededBy | |
Supersedes |
1.1This test method covers a procedure for determining the filterability of aviation turbine fuels (for other middle distillate fuels, see Test Method D6426).
Note 1:ASTM specification fuels falling within the scope of this test method are Specifications D1655 and D6615 and the military fuels covered in the military specifications listed in 2.2.
1.2This test method is not applicable to fuels that contain undissolved water.
1.3The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 4057 : 2019 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 4176 : 2021 | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
ASTM D 6300 : 2020 : REV A | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants |
ASTM D 6300 : 2013 | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 4057 : 1995 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 1655 : 2008 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 6300 : 2014 : REV A : EDT 1 | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 6426 : 1999 | Standard Test Method for Determining Filterability of Distillate Fuel Oils |
ASTM D 6615 : 2014 : REV A | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
ASTM D 4860 : 1991 : R1995 | Standard Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating) |
ASTM D 4177 : 2016 : EDT 1 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 6615 : 2001 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
ASTM D 1655 : 2011 : REV B | Standard Specification for Aviation Turbine Fuels |
ASTM D 4176 : 1993 : R1997 | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
ASTM D 1655 : 2012 | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2006 : REV B | Standard Specification for Aviation Turbine Fuels |
ASTM D 4176 : 2004 : R2019 | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
ASTM D 6300 : 2017 | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 6615 : 2015 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
ASTM D 1655 : 2006 : REV C | Standard Specification for Aviation Turbine Fuels |
ASTM D 6615 : 2010 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
ASTM D 6615 : 2011 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
ASTM D 1655 : 2021 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 4177 : 1995 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 1655 : 2018 : REV B | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2005 | Standard Specification for Aviation Turbine Fuels |
ASTM D 4860 : 2008 | Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating) |
ASTM D 1655 : 2017 | Standard Specification for Aviation Turbine Fuels |
ASTM D 6300 : 2017 : REV A | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 4057 : 2012 : R2018 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 4860 : 2022 | Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating) |
ASTM D 1655 : 2014 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2001 | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2011 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 4860 : 2014 | Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating) |
ASTM D 1655 : 2020 : REV D | Standard Specification for Aviation Turbine Fuels |
ASTM D 6615 : 2006 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
ASTM D 6300 : 2016 | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 1655 : 2022 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2006 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 4057 : 1981 : EDT 2 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 6300 : 2004 | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 1655 : 2022 | Standard Specification for Aviation Turbine Fuels |
ASTM D 6426 : 2022 | Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils |
ASTM D 6615 : 2022 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
ASTM D 1655 : 2015 : REV D | Standard Specification for Aviation Turbine Fuels |
ASTM D 6426 : 2007 | Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils |
ASTM D 1655 : 2008 | Standard Specification for Aviation Turbine Fuels |
ASTM D 6300 : 2019 | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 1655 : 2002 | Standard Specification for Aviation Turbine Fuels |
ASTM D 6426 : 2004 | Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils |
ASTM D 6615 : 2015 : REV A : R2019 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
ASTM D 1655 : 2006 | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2016 | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2010 | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2017 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2000 : REV B | Standard Specification for Aviation Turbine Fuels |
ASTM D 6300 : 2021 | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants |
ASTM D 6615 : 2004 : REV A | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
ASTM D 6300 : 2019 : REV A | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 1655 : 2015 : REV C | Standard Specification for Aviation Turbine Fuels |
ASTM D 6300 : 2020 | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants |
ASTM D 5452 : 2012 | Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
ASTM D 4860 : 1991 : R2005 | Standard Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating) |
ASTM D 5452 : 2000 | Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
ASTM D 6615 : 2011 : REV A | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
ASTM D 6615 : 2005 : REV A | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
ASTM D 4176 : 2004 : R2009 | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
ASTM D 1655 : 2015 | Standard Specification for Aviation Turbine Fuels |
ASTM D 4057 : 2006 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 1655 : 2007 | Standard Specification for Aviation Turbine Fuels |
ASTM D 4177 : 2015 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 1655 : 2015 : REV B | Standard Specification for Aviation Turbine Fuels |
ASTM D 4860 : 2021 | Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating) |
ASTM D 6615 : 2002 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
ASTM D 5452 : 2006 | Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
ASTM D 6300 : 2020 : REV B | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants |
ASTM D 4057 : 2012 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 6615 : 2015 : REV A | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
ASTM D 1655 : 2021 : REV B | Standard Specification for Aviation Turbine Fuels |
ASTM D 6300 : 2006 | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 5452 : 2005 | Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
ASTM D 1655 : 2012 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 6426 : 2013 | Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils |
ASTM D 6300 : 2014 : REV A | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 4176 : 2022 | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
ASTM D 6300 : 2015 | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 1655 : 2014 : REV B | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2015 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 6300 : 1999 | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 1655 : 1985 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2016 : REV C | Standard Specification for Aviation Turbine Fuels |
ASTM D 4177 : 2022 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 6426 : 2001 | Standard Test Method for Determining Filterability of Distillate Fuel Oils |
ASTM D 6615 : 2005 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
ASTM D 4177 : 1995 : R2010 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 1655 : 2004 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 4176 : 2021 : REV A | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
ASTM D 4177 : 1995 : R2000 | Standard Practice for Automatic Sampling of Peroleum and Petroleum Products |
ASTM D 6615 : 2000 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
ASTM D 6615 : 2014 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
ASTM D 4176 : 2004 : R2014 | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
ASTM D 5452 : 2020 | Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
ASTM D 4176 : 2020 | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
ASTM D 1655 : 2016 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 6300 : 2013 : REV A | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 1655 : 2021 | Standard Specification for Aviation Turbine Fuels |
ASTM D 6615 : 2004 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
ASTM D 4860 : 1991 : R2000 : EDT 1 | Standard Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating) |
ASTM D 1655 : 2021 : REV C | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2004 | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2014 : REV C | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2016 : REV B | Standard Specification for Aviation Turbine Fuels |
ASTM D 6300 : 2008 | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 6300 : 2003 | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 1655 : 2007 : EDT 1 | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2000 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2013 | Standard Specification for Aviation Turbine Fuels |
ASTM D 6300 : 2007 | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 1655 : 2015 : REV D : EDT 1 | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2019 | Standard Specification for Aviation Turbine Fuels |
ASTM D 4860 : 2014 : R2019 | Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating) |
ASTM D 6426 : 2002 : REV A | Standard Test Method for Determining Filterability of Distillate Fuel Oils |
ASTM D 1655 : 2006 : REV D | Standard Specification for Aviation Turbine Fuels |
ASTM D 6300 : 2002 | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 4057 : 2022 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 1655 : 2003 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2014 | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2003 | Standard Specification for Aviation Turbine Fuels |
ASTM D 4177 : 2016 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 1655 : 2009 | Standard Specification for Aviation Turbine Fuels |
ASTM D 4177 : 2020 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 4177 : 1995 : R2005 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 1655 : 2011 | Standard Specification for Aviation Turbine Fuels |
ASTM D 6426 : 2018 | Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils |
ASTM D 6300 : 2016 : REV A | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 4860 : 2013 | Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating) |
ASTM D 1655 : 2020 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2009 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2018 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2020 | Standard Specification for Aviation Turbine Fuels |
ASTM D 4057 : 1995 : R2000 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 1655 : 2018 | Standard Specification for Aviation Turbine Fuels |
ASTM D 6426 : 2002 | Standard Test Method for Determining Filterability of Distillate Fuel Oils |
ASTM D 4177 : 2015 : REV A | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 4176 : 2004 : EDT 1 | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
ASTM D 4176 : 2002 | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
ASTM D 6300 : 2014 | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
ASTM D 4057 : 2006 : R2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 5452 : 2008 | Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
ASTM D 1655 : 2019 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 1655 : 2013 : REV A | Standard Specification for Aviation Turbine Fuels |
ASTM D 4860 : 2007 | Standard Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating) |
ASTM D 4176 : 2004 | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.