ASTM D 7236 : 2016 : REV A
|
Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method) |
ASTM D 7945 : 2016
|
Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer |
ASTM D 3831 : 2012 : R2017
|
Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy |
ASTM D 7751 : 2016
|
Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis |
ASTM D 86 : 2018
|
Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure |
ASTM D 7039 : 2015 : REV A
|
Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry |
ASTM D 445 : 2019
|
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
ASTM D 1266 : 2018
|
Standard Test Method for Sulfur in Petroleum Products (Lamp Method) |
ASTM D 7875 : 2014
|
Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography |
ASTM E 2056 : 2004 : R2016
|
Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures |
ASTM D 6890 : 2018
|
Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber |
ASTM D 6708 : 2019
|
Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material |
ASTM D 7757 : 2017
|
Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry |
ASTM D 7344 : 2017 : REV A
|
Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method) |
ASTM D 97 : 2017 : REV B
|
Standard Test Method for Pour Point of Petroleum Products |
ASTM D 2068 : 2017
|
Standard Test Method for Determining Filter Blocking Tendency |
ASTM D 2266 : 2001 : R2015
|
Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) |
ASTM D 7756 : 2019
|
Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection |
ASTM E 1655 : 2017
|
Standard Practices for Infrared Multivariate Quantitative Analysis |
ASTM D 8183 : 2018
|
Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method |
ASTM D 7220 : 2012 : R2017
|
Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry |
ASTM D 7483 : 2013 : REV A : R2017
|
Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer |
ASTM D 7501 : 2018 : REV A
|
Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT) |
ASTM D 7798 : 2015
|
Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538 °C by Ultra Fast Gas Chromatography (UF GC) |
ASTM D 2887 : 2019
|
Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography |
ASTM D 8150 : 2017
|
Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography |
ASTM D 8243 : 2019
|
Standard Test Method for Determination of APS Reductase to Estimate Sulfate Reducing Bacterial Bioburdens in Water – Enzyme-Linked Immunosorbent Assay Method |
ASTM D 8206 : 2018
|
Standard Test Method for Oxidation Stability of Lubricating Greases—Rapid Small-Scale Oxidation Test (RSSOT) |
ASTM D 7423 : 2017
|
Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection |
ASTM D 7620 : 2010 : R2015
|
Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection |
ASTM D 7623 : 2010 : R2015
|
Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method |
ASTM D 7060 : 2012 : R2014
|
Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method) |
ASTM D 7042 : 2016 : EDT 3
|
Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity) |
ASTM D 7463 : 2018
|
Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water |
ASTM D 7416 : 2009 : R2015
|
Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscometer) Integrated Tester |
ASTM D 2892 : 2018 : REV A
|
Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column) |
ASTM D 7622 : 2010 : R2015
|
Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction |
ASTM D 8148 : 2017
|
Standard Test Method for Spectroscopic Determination of Haze in Fuels |
ASTM D 1552 : 2016 : EDT 1
|
Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD) |
ASTM D 7619 : 2017
|
Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter |
ASTM D 7525 : 2014
|
Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT) |
ASTM D 7797 : 2018
|
Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method |
ASTM D 6259 : 2015 : R2019
|
Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method |
ASTM D 2532 : 2017
|
Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants |
ASTM D 7043 : 2017
|
Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump |
ASTM D 7170 : 2016
|
Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method (Withdrawn 2019) |
ASTM D 7279 : 2018
|
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer |
ASTM D 7419 : 2018
|
Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection |
ASTM D 7621 : 2016
|
Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction |
ASTM D 8146 : 2018
|
Standard Guide for Evaluating Test Method Capability and Fitness for Use |
ASTM D 8126 : 2017
|
Standard Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration |
ASTM D 2885 : 2019 : REV A
|
Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique |
ASTM D 7261 : 2017
|
Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer |
ASTM D 8267 : 2019
|
Standard Test Method for Determination of Saturated Hydrocarbon, Aromatic, and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV) |
ASTM D 7576 : 2016
|
Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography (Withdrawn 2022) |
ASTM D 6822 : 2012 : REV B : R2017
|
Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method |
ASTM D 6824 : 2013 : R2018
|
Standard Test Method for Determining Filterability of Aviation Turbine Fuel |
ASTM D 7861 : 2014 : R2019
|
Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy |
ASTM D 7687 : 2017
|
Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration |
ASTM D 7847 : 2017
|
Standard Guide for Interlaboratory Studies for Microbiological Test Methods |
ASTM D 6792 : 2017
|
Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories |
ASTM D 4683 : 2017
|
Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C |
ASTM D 7807 : 2012
|
Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection |
ASTM D 5481 : 2013
|
Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer |
ASTM D 7346 : 2015
|
Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels |
ASTM D 7778 : 2015
|
Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 8098 : 2017
|
Standard Test Method for Permanent Gases in C2 and C3 Hydrocarbon Products by Gas Chromatography and Pulse Discharge Helium Ionization Detector |
ASTM D 4741 : 2018
|
Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer |
ASTM D 7212 : 2013 : R2018
|
Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter |
ASTM D 8184 : 2018 : EDT 1
|
Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument |
ASTM D 6299 : 2018
|
Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 3244 : 2018
|
Standard Practice for Utilization of Test Data to Determine Conformance with Specifications |
ASTM D 7963 : 2019 : EDT 1
|
Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method |
ASTM D 7345 : 2017
|
Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method) |
ASTM D 7096 : 2019
|
Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography |
ASTM D 1218 : 2012 : R2016
|
Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids |
ASTM D 130 : 2019
|
Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test |
ASTM D 8166 : 2017
|
Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters |
ASTM D 1160 : 2018
|
Standard Test Method for Distillation of Petroleum Products at Reduced Pressure |
ASTM D 8071 : 2017
|
Standard Test Method for Determination of Hydrocarbon Group Types and Select Hydrocarbon and Oxygenate Compounds in Automotive Spark-Ignition Engine Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV) |
ASTM D 56 : 2016 : REV A
|
Standard Test Method for Flash Point by Tag Closed Cup Tester |
ASTM D 2500 : 2017 : REV A
|
Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels |
ASTM D 6450 : 2016 : REV A
|
Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester |
ASTM D 4929 : 2017
|
Standard Test Method for Determination of Organic Chloride Content in Crude Oil |
ASTM D 6378 : 2018 : REV A
|
Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method) |
ASTM D 7373 : 2012
|
Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model (Withdrawn 2021) |
ASTM D 2425 : 2019
|
Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry |
ASTM D 4012 : 2015
|
Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water |