ASTM D 6943 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings
Available format(s)
Hardcopy , PDF
Superseded date
04-07-2024
Superseded by
Language(s)
English
Published date
01-06-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 01
|
| DocumentType |
Standard Practice
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice establishes procedures for the evaluation of the resistance of industrial protective coatings to immersion in chemicals.
1.2Linings are a particular type of coating intended for protection of substrates from corrosion as a result of continuous or intermittent fluid immersion.
1.3The values stated in SI units are to be regarded as the standard. The values given in parenthesis are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 6577 : 2015 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 6577 : 2015 : R2019 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 6132 : 2013 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage |
| ASTM D 2240 : 2000 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 5139 : 1990 : R2001 | Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants (Withdrawn 2010) |
| ASTM D 5162 : 2008 | Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates |
| ASTM D 2583 : 2013 : REV A | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor (Withdrawn 2022) |
| ASTM D 3359 : 2009 : EDT 2 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 3363 : 2005 : R2011 : EDT 2 | Standard Test Method for Film Hardness by Pencil Test (Withdrawn 2020) |
| ASTM D 7234 : 2005 | Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers |
| ASTM D 4138 : 1994 : R2001 : EDT 1 | Standard Test Methods for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive Means |
| ASTM D 4541 : 2009 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 4538 : 2005 : EDT 1 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM D 6132 : 1997 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Over Concrete Using an Ultrasonic Gage |
| ASTM D 5139 : 2012 | Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants |
| ASTM D 4417 : 1993 : R1999 | Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
| ASTM D 4417 : 2011 | Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
| ASTM D 4538 : 2005 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM D 6577 : 2006 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 7055 : 2009 | Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings |
| ASTM D 6577 : 2015 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 5162 : 2001 | Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates |
| ASTM D 1734 : 1993 : R2013 | Standard Practice for Making Cementitious Panels for Testing Coatings |
| ASTM D 3363 : 2000 | Standard Test Method for Film Hardness by Pencil Test |
| ASTM D 2240 : 2004 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1734 : 1993 : R2007 | Standard Practice for Making Cementitious Panels for Testing Coatings |
| ASTM D 4138 : 2007 : REV A : R2013 | Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means |
| ASTM D 2583 : 2006 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor |
| ASTM D 3359 : 1997 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 2200 : 2017 | Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces |
| ASTM D 1734 : 1993 : R1998 | Standard Practice for Making Cementitious Panels for Testing Coatings |
| ASTM D 4538 : 2015 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM D 4541 : 2009 : EDT 1 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 4417 : 2003 | Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
| ASTM D 3363 : 2005 | Standard Test Method for Film Hardness by Pencil Test |
| ASTM D 7055 : 2004 | Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings |
| ASTM D 1474 : 1998 : R2002 | Standard Test Methods for Indentation Hardness of Organic Coatings |
| ASTM D 5139 : 2019 | Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants |
| ASTM D 6577 : 2000 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 2583 : 2013 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor |
| ASTM D 2240 : 2004 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 5139 : 2010 | Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants |
| ASTM D 4541 : 2002 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 6677 : 2007 | Standard Test Method for Evaluating Adhesion by Knife |
| ASTM D 3359 : 2009 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 6577 : 2006 : R2011 : EDT 1 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 1734 : 1993 : R2003 | Standard Practice for Making Cementitious Panels for Testing Coatings |
| ASTM D 7234 : 2012 | Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers |
| ASTM D 4541 : 2017 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 2200 : 2008 | Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces |
| ASTM D 3359 : 2002 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 3359 : 2009 : EDT 1 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 3363 : 2005 : R2011 : EDT 1 | Standard Test Method for Film Hardness by Pencil Test |
| ASTM D 6132 : 2013 : R2017 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage |
| ASTM D 4138 : 1994 : R1999 | Standard Test Methods for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive Means |
| ASTM D 3359 : 2007 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 1474 : 1998 : R2008 | Standard Test Methods for Indentation Hardness of Organic Coatings |
| ASTM D 5162 : 2015 | Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates |
| ASTM D 7091 : 2013 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 2240 : 2002 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 5139 : 1990 : R1996 | Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants |
| ASTM D 6132 : 2008 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage |
| ASTM D 7055 : 2019 | Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings |
| ASTM D 2240 : 2015 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 2240 : 2003 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 6677 : 2001 | Standard Test Method for Evaluating Adhesion by Knife |
| ASTM D 6577 : 2000 : REV A | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 4538 : 2013 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM D 2240 : 2002 : REV B | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 7091 : 2012 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 6677 : 2018 | Standard Test Method for Evaluating Adhesion by Knife |
| ASTM D 6677 : 2007 : R2012 | Standard Test Method for Evaluating Adhesion by Knife |
| ASTM D 7091 : 2005 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 2240 : 2015 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 4417 : 2014 | Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
| ASTM D 3363 : 2005 : R2011 | Standard Test Method for Film Hardness by Pencil Test |
| ASTM D 4138 : 2007 : REV A : R2017 | Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means |
| ASTM D 3359 : 2008 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 2200 : 1995 | Standard Pictoral Surface Preparation Standards for Painting Steel Surfaces |
| ASTM D 2240 : 2005 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1474 : 1998 | Standard Test Methods for Indentation Hardness of Organic Coatings |
| ASTM D 4538 : 1995 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM D 2240 : 2005 : R2010 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 4541 : 1995 : EDT 1 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 7055 : 2014 | Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings |
| ASTM D 5162 : 2000 | Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates |
| ASTM D 4138 : 2007 | Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means |
| ASTM D 3359 : 2017 | Standard Test Methods for Rating Adhesion by Tape Test |
| ASTM D 2240 : 2002 : REV A | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 2583 : 2007 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor |
| ASTM D 2583 : 1995 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor |
| ASTM D 6132 : 2004 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage |
| ASTM D 2200 : 2013 | Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces |
| ASTM D 4138 : 2007 : REV A | Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.