ASTM D 7085 : 2004 : R2018
Current
The latest, up-to-date edition.
Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
Hardcopy , PDF
English
01-11-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 05.05, 2015 Specifies procedures for the quantitative chemical analysis of up to 29 elements in fluid catalytic cracking (FCC) catalyst by X-ray fluorescence spectrometry (XRF).
| Committee |
D 32
|
| DocumentType |
Guide
|
| Pages |
9
|
| ProductNote |
Reconfirmed 2004
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This guide covers several comparable procedures for the quantitative chemical analysis of up to 29 elements in fluid catalytic cracking (FCC) catalyst by X-ray fluorescence spectrometry (XRF). Additional elements may be added.
1.2This guide is applicable to fresh FCC catalyst, equilibrium FCC catalyst, spent FCC catalyst, and FCC catalyst fines.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3.1The units of ppm (mg/kg) are used instead of wt% in Tables X2.3-X2.5 for reporting concentration of certain elements because of industry convention and because most of these elements are present at trace levels.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 8088 : 2016 | Standard Practice for Determination of the Six Major Rare Earth Elements in Fluid Catalytic Cracking Catalysts, Zeolites, Additives, and Related Materials by Inductively Coupled Plasma Optical Emission Spectroscopy |
| ASTM D 1977 : 2022 | Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis |
| ASTM C 1118 : 2007 | Standard Guide for Selecting Components for Wavelength-Dispersive X-Ray Fluorescence (XRF) Systems (Withdrawn 2011) |
| ASTM D 1977 : 2016 | Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis |
| ASTM E 1621 : 2013 | Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ASTM E 1172 : 2016 | Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer |
| ASTM E 1361 : 2002 : R2021 | Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis |
| ASTM D 1977 : 2016 : REDLINE | Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis |
| ASTM E 1172 : 2022 | Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer |
| ASTM E 1621 : 2005 | Standard Guide for X-Ray Emission Spectrometric Analysis |
| ASTM E 1172 : 1987 : R2011 | Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer |
| ASTM E 1172 : 1987 : R2003 | Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer |
| ASTM D 1977 : 2003 | Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis |
| ASTM E 1361 : 1990 : R1999 | Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis |
| ASTM E 1361 : 2002 : R2007 | Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis |
| ASTM E 1621 : 2022 | Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ASTM E 1361 : 2002 | Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis |
| ASTM E 1622 : 1994 : R1999 : EDT 1 | Standard Practice for Correction of Spectral Line Overlap in Wavelength-Dispersive X-Ray Spectrometry (Withdrawn 2006) |
| ASTM E 1172 : 2016 : REDLINE | Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer |
| ASTM E 1621 : 2021 | Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ASTM E 1361 : 2002 : R2014 : EDT 1 | Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis |
| ASTM E 1172 : 1987 : R1996 | Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer |
| ASTM E 1621 : 2013 : REDLINE | Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ASTM D 1977 : 1998 | Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis |
| ASTM D 1977 : 2003 : R2008 | Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis |
| ASTM C 1118 : 1989 : R2000 | Standard Guide for Selecting Components for Wavelength-Dispersive X-Ray Fluorescence (XRF) Systems |
| ASTM E 1621 : 1994 : R1999 | Standard Guide for X-Ray Emission Spectrometric Analysis |
| ASTM E 1172 : 1987 : R2001 | Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.