ASTM D 7365 : 2009 : REV A : R2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
Available format(s)
Hardcopy , PDF
Superseded date
18-06-2022
Superseded by
Language(s)
English
Published date
05-08-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 11.02, 2015 Specifies the collection and preservation of water samples for the analysis of cyanide.
| Committee |
D 19
|
| DocumentType |
Standard Practice
|
| Pages |
11
|
| ProductNote |
Reconfirmed 2015
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice is applicable for the collection and preservation of water samples for the analysis of cyanide. This practice addresses the mitigation of known interferences prior to the analysis of cyanide. Responsibilities of field sampling personnel and the laboratory are indicated.
1.2The sampling, preservation and mitigation of interference procedures described in this practice are recommended for the analysis of total cyanide, available cyanide, weak acid dissociable cyanide, and free cyanide by Test Methods D2036, D4282, D4374, D6888, D6994, D7237, D7284, and D7511. The information supplied in this practice can also be applied to other analytical methods for cyanide, for example, EPA Method 335.4.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 4193 : 2008 : R2013 : EDT 1 | Standard Test Method for Thiocyanate in Water |
| ASTM E 800 : 2014 | Standard Guide for Measurement of Gases Present or Generated During Fires |
| ASTM D 2036 : 2009 : R2015 | Standard Test Methods for Cyanides in Water |
| ASTM D 6888 : 2016 | Standard Test Method for Available Cyanides with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM D 7572 : 2015 | Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil |
| ASTM D 7284 : 2013 : R2017 | Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection |
| ASTM D 7511 : 2012 : R2017 : EDT 1 | Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection |
| ASTM D 7237 : 2018 | Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM D 7728 : 2018 | Standard Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance |
| ASTM D 7295 : 2018 | Standard Practice for Sampling Combustion Effluents and Other Stationary Sources for the Subsequent Determination of Hydrogen Cyanide |
| ASTM D 2036 : 2009 : R2022 | Standard Test Methods for Cyanides in Water |
| ASTM D 7572 : 2015 : R2022 | Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil |
| ASTM D 7284 : 2020 | Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection |
| ASTM D 4193 : 2008 : R2020 : EDT 1 | Standard Test Method for Thiocyanate in Water |
| ASTM E 800 : 2020 | Standard Guide for Measurement of Gases Present or Generated During Fires |
| ASTM D 4840 : 1999 : R2018 : EDT 1 | Standard Guide for Sample Chain-of-Custody Procedures |
| ASTM D 6994 : 2010 | Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection |
| ASTM D 4282 : 2002 | Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion |
| ASTM D 3694 : 1996 : R2011 | Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents |
| ASTM D 4841 : 1988 : R2008 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 3370 : 1995 : REV A : R2003 : EDT 1 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 4840 : 1999 | Standard Guide for Sampling Chain-of-Custody Procedures |
| ASTM D 4411 : 2003 : R2014 : EDT 1 | Standard Guide for Sampling Fluvial Sediment in Motion |
| ASTM D 1129 : 2013 : REDLINE | Standard Terminology Relating to Water |
| ASTM D 1129 : 2003 | Standard Terminology Relating to Water |
| ASTM D 4282 : 2002 : R2010 | Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion |
| ASTM D 4841 : 1988 : R2018 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 1129 : 2013 | Standard Terminology Relating to Water |
| ASTM D 7511 : 2009 | Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection |
| ASTM D 7237 : 2018 | Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM D 1129 : 2013 : R2020 | Standard Terminology Relating to Water |
| ASTM D 2036 : 1991 | Standard Test Methods for Cyanides in Water |
| ASTM D 5847 : 1999 : REV A : EDT 1 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 3694 : 1996 | Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents |
| ASTM D 6888 : 2003 | Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM D 6696 : 2016 : REDLINE | Standard Guide for Understanding Cyanide Species |
| ASTM D 7284 : 2013 | Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection |
| ASTM D 6994 : 2004 | Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection |
| ASTM D 6696 : 2016 | Standard Guide for Understanding Cyanide Species |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM D 4841 : 1988 : R1998 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 5847 : 2002 : R2007 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 4282 : 1995 | Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion |
| ASTM D 6888 : 2016 | Standard Test Method for Available Cyanides with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM D 6696 : 2010 | Standard Guide for Understanding Cyanide Species |
| ASTM D 1129 : 2006 | Standard Terminology Relating to Water |
| ASTM D 6696 : 2014 | Standard Guide for Understanding Cyanide Species |
| ASTM D 4841 : 1988 : R2003 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 3370 : 2010 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 6994 : 2015 : REDLINE | Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection |
| ASTM D 4282 : 2015 : REDLINE | Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion |
| ASTM D 4841 : 1988 : R2013 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 6696 : 2005 : EDT 1 | Standard Guide for Understanding Cyanide Species |
| ASTM D 4282 : 2015 | Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion |
| ASTM D 5847 : 2002 : R2012 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 4374 : 2006 | Standard Test Methods for Cyanides in Water-Automated Methods for Total Cyanide, Weak Acid Dissociable Cyanide, and Thiocyanate (Withdrawn 2013) |
| ASTM D 3694 : 1996 : R2017 | Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents |
| ASTM D 2036 : 2009 : R2015 | Standard Test Methods for Cyanides in Water |
| ASTM D 3370 : 2008 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 1129 : 1999 : REV A | Standard Terminology Relating to Water |
| ASTM D 2036 : 1998 | Standard Test Methods for Cyanides in Water |
| ASTM D 6888 : 2009 | Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM D 3856 : 2011 | Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water |
| ASTM D 1129 : 2006 : REV A | Standard Terminology Relating to Water |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM D 6888 : 2004 | Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM D 5847 : 2002 : R2020 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 1129 : 2003 : REV A | Standard Terminology Relating to Water |
| ASTM D 3694 : 1996 : R2004 | Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents |
| ASTM D 1129 : 2002 | Standard Terminology Relating to Water |
| ASTM D 6696 : 2005 | Standard Guide for Understanding Cyanide Species |
| ASTM D 7511 : 2009 : EDT 1 | Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection |
| ASTM D 7511 : 2012 : R2017 : EDT 1 | Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection |
| ASTM D 7511 : 2012 | Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection |
| ASTM D 4411 : 1998 | Standard Guide for Sampling Fluvial Sediment in Motion |
| ASTM D 2036 : 2009 | Standard Test Methods for Cyanides in Water |
| ASTM D 7284 : 2008 | Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection |
| ASTM D 7284 : 2008 : EDT 1 | Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection |
| ASTM D 7237 : 2010 | Standard Test Method for Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM D 4411 : 2003 : R2019 | Standard Guide for Sampling Fluvial Sediment in Motion |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| ASTM D 7237 : 2015 : REV A | Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM D 7237 : 2006 | Standard Test Method for Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM D 3856 : 1995 : R2006 | Standard Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water |
| ASTM D 1129 : 2004 | Standard Terminology Relating to Water |
| ASTM D 7284 : 2013 : R2017 | Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection |
| ASTM D 3856 : 2011 : R2015 | Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water (Withdrawn 2024) |
| ASTM D 3856 : 1995 : R2000 | Standard Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water |
| ASTM D 3370 : 2018 | Standard Practices for Sampling Water from Flowing Process Streams |
| ASTM D 6696 : 2001 | Standard Guide for Understanding Cyanide Species |
| ASTM D 1129 : 2002 : REV A | Standard Terminology Relating to Water |
| ASTM D 5847 : 2002 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 3370 : 1976 | Standard Practices for Sampling Water |
| ASTM D 4374 : 2000 | Standard Test Methods for Cyanides in Water--Automated Methods for Total Cyanide, Acid dissociable Cyanide, and Thiocyanate |
| ASTM D 4282 : 1995 : R2001 | Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM D 4841 : 1988 : R2013 : EDT 1 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM D 3370 : 1995 : REV A : R1999 : EDT 1 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM D 1129 : 2010 | Standard Terminology Relating to Water |
| ASTM D 3370 : 2007 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 2036 : 2006 | Standard Test Methods for Cyanides in Water |
| ASTM D 4411 : 2003 : R2008 | Standard Guide for Sampling Fluvial Sediment in Motion |
| ASTM D 1129 : 2006 : REV A : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 7511 : 2009 : EDT 2 | Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection |
| ASTM D 1129 : 2001 | Standard Terminology Relating to Water |
| ASTM D 7237 : 2015 | Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM D 6994 : 2015 | Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection (Withdrawn 2024) |
| ASTM D 1129 : 2004 : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
| ASTM D 6888 : 2016 : REDLINE | Standard Test Method for Available Cyanides with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM D 4282 : 2002 : R2015 | Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion |
| ASTM D 4411 : 2003 : R2014 | Standard Guide for Sampling Fluvial Sediment in Motion |
| ASTM D 4411 : 2003 | Standard Guide for Sampling Fluvial Sediment in Motion |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.