ASTM D 7563 : 2010 : R2016

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel

Available format(s): Hardcopy, PDF

Superseded date: 04-08-2023

Language(s): English

Published date: 11-05-2016

Publisher: American Society for Testing and Materials

Abstract - (Show below) - (Hide below)

CONTAINED IN VOL. 05.04, 2017 Specifies a qualitative procedure to measure the ability of a specific volume of engine oil to emulsify a specific added volume of combined water and simulated Ed85 fuel upon agitation in a high-speed blender and to retain this emulsified state for at least 24 h at temperatures of both 20 degrees C to 25 degrees C and -5 degrees C to 0 degrees C.

Scope - (Show below) - (Hide below)

1.1This test method describes a qualitative procedure to measure the ability of a specific volume of engine oil to emulsify a specific added volume of combined water and simulated Ed85 fuel upon agitation in a high-speed blender and to retain this emulsified state for at least 24 h at temperatures of both 20 °C to 25 °C and –5 °C to 0 °C.

1.2Information Letters are published periodically by the ASTM Test Monitoring Center (TMC) to update this and other test methods under the jurisdiction of Subcommittee D02.B0. Copies of these letters can be obtained by writing the Center.2

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Product Information - (Show below) - (Hide below)

Committee	D 02
Document Type	Test Method
ISBN
Pages
Product Note	Reconfirmed 2016
Published
Publisher	American Society for Testing and Materials
Status	Superseded
Superseded By	ASTM D 7563 : 2023
Supersedes	ASTM D 7563 : 2010

Standards Referencing This Book - (Show below) - (Hide below)

ASTM D 5798 : 2019	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4175 : 2020	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2014	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 5798 : 2007	Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
ASTM D 4485 : 2003 : REV A	Standard Specification for Performance of Engine Oils
ASTM D 4806 : 2021	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2009 : REV A : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2008 : REV B : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4806 : 2002	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4485 : 2006	Standard Specification for Performance of Engine Oils
ASTM D 5798 : 2015	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4175 : 2005	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4806 : 2016	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 5798 : 2009 : REV A	Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
ASTM D 4485 : 2011 : REV C	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 5798 : 2020	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4175 : 2005 : EDT 2	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4806 : 2021 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4485 : 2001	Standard Specification for Performance of Engine Oils
ASTM E 1272 : 2002 : R2007	Standard Specification for Laboratory Glass Graduated Cylinders
ASTM D 4175 : 2015 : REV C	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2020 : REV B	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2017 : REV A : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4485 : 2003	Standard Specification for Performance of Engine Oils
ASTM D 4806 : 2007 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4485 : 2008	Standard Specification for Performance of Engine Oils
ASTM D 4485 : 2015	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4485 : 2005 : REV A	Standard Specification for Performance of Engine Oils
ASTM D 5798 : 2012	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4175 : 2008 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2020 : REV A	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2017 : REV B	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2009	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4485 : 2011 : REV A	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4806 : 2015	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2006 : REV B	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 5854 : 1996 : R2010	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 1193 : 1977 : R1983 : EDT 1	Standard Specification for Reagent Water
ASTM D 4175 : 2022	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4485 : 2018	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4175 : 2009 : REV A : EDT 4	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 5798 : 2010 : REV A	Standard Specification for Fuel Ethanol (Ed70-Ed85) for Automotive Spark-Ignition Engines
ASTM D 4175 : 2009 : REV A : EDT 3	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 5798 : 1999 : R2004	Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
ASTM D 4806 : 2006 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM E 1272 : 2002	Standard Specification for Laboratory Glass Graduated Cylinders
ASTM E 1272 : 1995 : R1999	Standard Specification for Laboratory Glass Graduated Cylinders
ASTM D 5854 : 2019	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4485 : 2011 : REV B	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4485 : 2016	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4175 : 2018	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4485 : 2007	Standard Specification for Performance of Engine Oils
ASTM D 4806 : 2006	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4485 : 2010	Standard Specification for Performance of Engine Oils
ASTM D 4806 : 2001	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4485 : 2001 : REV A	Standard Specification for Performance of Engine Oils
ASTM D 4175 : 2001 : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2020 : REV B : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4806 : 2014	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 5854 : 1996 : R2005	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM E 1272 : 2002 : R2019	Standard Specification for Laboratory Glass Graduated Cylinders
ASTM D 4175 : 2001	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2005 : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4806 : 2004 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2022 : REV A	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4806 : 2013	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2002	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 5798 : 2006	Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
ASTM D 4485 : 2004	Standard Specification for Performance of Engine Oils
ASTM D 4806 : 2001 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 5798 : 2017	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4806 : 2003	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM E 1272 : 2002 : R2012	Standard Specification for Laboratory Glass Graduated Cylinders
ASTM D 4175 : 2023	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4806 : 2008 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 5798 : 2018 : REV A	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4485 : 2020	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4806 : 2018 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2015	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 1193 : 2006 : R2011	Standard Specification for Reagent Water
ASTM D 4485 : 2000	Standard Specification for Performance of Engine Oils
ASTM D 4175 : 2002 : REV A : EDT 2	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4806 : 2017	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2010 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2011 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4485 : 2015 : REV A	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4175 : 2022 : REV A : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 5798 : 2009	Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
ASTM D 5798 : 2009 : REV B	Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
ASTM D 4806 : 2016 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2009 : REV A : EDT 5	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2016 : REV C	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2015 : REV B	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2015 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4485 : 2006 : REV A	Standard Specification for Performance of Engine Oils
ASTM D 4806 : 2007	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2019	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2004	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2010	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 1193 : 1991	Standard Specification for Reagent Water
ASTM D 4175 : 2009 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4806 : 2011	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2016 : REV B	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 5798 : 2013 : REV A	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4806 : 2013 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2002 : REV A : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2008	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4806 : 2019 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2002 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2000 : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2016 : REV A	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4806 : 2018	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 5854 : 1996 : R2000	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4175 : 2019 : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4485 : 2018 : REV A	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4175 : 2022 : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4806 : 2008	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4485 : 2005	Standard Specification for Performance of Engine Oils
ASTM D 4806 : 2006 : REV C	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4485 : 2014	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 5798 : 2010	Standard Specification for Fuel Ethanol (Ed70-Ed85) for Automotive Spark-Ignition Engines
ASTM D 4485 : 2002	Standard Specification for Performance of Engine Oils
ASTM D 4175 : 2017 : REV A	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4485 : 2005 : EDT 1	Standard Specification for Performance of Engine Oils
ASTM D 5798 : 2019 : REV A	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 5798 : 2018	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 5798 : 2011	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4175 : 2009 : REV A : EDT 2	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4485 : 2022	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 1193 : 1970	Standard Specification For Reagent Water
ASTM D 4806 : 2009	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2020	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 5798 : 2021	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4806 : 2012	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 1193 : 2006	Standard Specification for Reagent Water
ASTM D 4175 : 2018 : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2016	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 1193 : 1999	Standard Specification for Reagent Water
ASTM D 5854 : 2019 : REV A	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4806 : 2010 : REV B	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 5798 : 2014	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4175 : 2017	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4806 : 1999	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2019	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 1193 : 2006 : R2018	Standard Specification for Reagent Water
ASTM D 4485 : 2009	Standard Specification for Performance of Engine Oils
ASTM D 4485 : 2019	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4175 : 2015 : REV B : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4485 : 2010 : REV A	Standard Specification for Performance of Engine Oils
ASTM D 4485 : 2011	Standard Specification for Performance of Engine Oils
ASTM D 5854 : 1996 : R2015	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4175 : 2008 : REV B	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4485 : 2022 : EDT 1	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 5798 : 2019 : REV B	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 5798 : 1999	Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
ASTM D 5798 : 2013	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4485 : 2007 : REV A	Standard Specification for Performance of Engine Oils

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account

Committee	D 02
Document Type	Test Method
ISBN
Pages
Product Note	Reconfirmed 2016
Published
Publisher	American Society for Testing and Materials
Status	Superseded
Superseded By	ASTM D 7563 : 2023
Supersedes	ASTM D 7563 : 2010

Standards Referencing This Book - (Show below) - (Hide below)

ASTM D 5798 : 2019	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4175 : 2020	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2014	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 5798 : 2007	Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
ASTM D 4485 : 2003 : REV A	Standard Specification for Performance of Engine Oils
ASTM D 4806 : 2021	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2009 : REV A : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2008 : REV B : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4806 : 2002	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4485 : 2006	Standard Specification for Performance of Engine Oils
ASTM D 5798 : 2015	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4175 : 2005	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4806 : 2016	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 5798 : 2009 : REV A	Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
ASTM D 4485 : 2011 : REV C	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 5798 : 2020	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4175 : 2005 : EDT 2	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4806 : 2021 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4485 : 2001	Standard Specification for Performance of Engine Oils
ASTM E 1272 : 2002 : R2007	Standard Specification for Laboratory Glass Graduated Cylinders
ASTM D 4175 : 2015 : REV C	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2020 : REV B	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2017 : REV A : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4485 : 2003	Standard Specification for Performance of Engine Oils
ASTM D 4806 : 2007 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4485 : 2008	Standard Specification for Performance of Engine Oils
ASTM D 4485 : 2015	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4485 : 2005 : REV A	Standard Specification for Performance of Engine Oils
ASTM D 5798 : 2012	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4175 : 2008 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2020 : REV A	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2017 : REV B	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2009	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4485 : 2011 : REV A	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4806 : 2015	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2006 : REV B	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 5854 : 1996 : R2010	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 1193 : 1977 : R1983 : EDT 1	Standard Specification for Reagent Water
ASTM D 4175 : 2022	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4485 : 2018	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4175 : 2009 : REV A : EDT 4	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 5798 : 2010 : REV A	Standard Specification for Fuel Ethanol (Ed70-Ed85) for Automotive Spark-Ignition Engines
ASTM D 4175 : 2009 : REV A : EDT 3	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 5798 : 1999 : R2004	Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
ASTM D 4806 : 2006 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM E 1272 : 2002	Standard Specification for Laboratory Glass Graduated Cylinders
ASTM E 1272 : 1995 : R1999	Standard Specification for Laboratory Glass Graduated Cylinders
ASTM D 5854 : 2019	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4485 : 2011 : REV B	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4485 : 2016	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4175 : 2018	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4485 : 2007	Standard Specification for Performance of Engine Oils
ASTM D 4806 : 2006	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4485 : 2010	Standard Specification for Performance of Engine Oils
ASTM D 4806 : 2001	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4485 : 2001 : REV A	Standard Specification for Performance of Engine Oils
ASTM D 4175 : 2001 : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2020 : REV B : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4806 : 2014	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 5854 : 1996 : R2005	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM E 1272 : 2002 : R2019	Standard Specification for Laboratory Glass Graduated Cylinders
ASTM D 4175 : 2001	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2005 : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4806 : 2004 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2022 : REV A	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4806 : 2013	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2002	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 5798 : 2006	Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
ASTM D 4485 : 2004	Standard Specification for Performance of Engine Oils
ASTM D 4806 : 2001 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 5798 : 2017	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4806 : 2003	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM E 1272 : 2002 : R2012	Standard Specification for Laboratory Glass Graduated Cylinders
ASTM D 4175 : 2023	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4806 : 2008 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 5798 : 2018 : REV A	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4485 : 2020	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4806 : 2018 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2015	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 1193 : 2006 : R2011	Standard Specification for Reagent Water
ASTM D 4485 : 2000	Standard Specification for Performance of Engine Oils
ASTM D 4175 : 2002 : REV A : EDT 2	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4806 : 2017	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2010 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2011 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4485 : 2015 : REV A	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4175 : 2022 : REV A : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 5798 : 2009	Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
ASTM D 5798 : 2009 : REV B	Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
ASTM D 4806 : 2016 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2009 : REV A : EDT 5	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2016 : REV C	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2015 : REV B	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2015 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4485 : 2006 : REV A	Standard Specification for Performance of Engine Oils
ASTM D 4806 : 2007	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2019	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2004	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2010	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 1193 : 1991	Standard Specification for Reagent Water
ASTM D 4175 : 2009 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4806 : 2011	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2016 : REV B	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 5798 : 2013 : REV A	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4806 : 2013 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2002 : REV A : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2008	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4806 : 2019 : REV A	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2002 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2000 : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2016 : REV A	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4806 : 2018	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 5854 : 1996 : R2000	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4175 : 2019 : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4485 : 2018 : REV A	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4175 : 2022 : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4806 : 2008	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4485 : 2005	Standard Specification for Performance of Engine Oils
ASTM D 4806 : 2006 : REV C	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4485 : 2014	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 5798 : 2010	Standard Specification for Fuel Ethanol (Ed70-Ed85) for Automotive Spark-Ignition Engines
ASTM D 4485 : 2002	Standard Specification for Performance of Engine Oils
ASTM D 4175 : 2017 : REV A	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4485 : 2005 : EDT 1	Standard Specification for Performance of Engine Oils
ASTM D 5798 : 2019 : REV A	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 5798 : 2018	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 5798 : 2011	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4175 : 2009 : REV A : EDT 2	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4485 : 2022	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 1193 : 1970	Standard Specification For Reagent Water
ASTM D 4806 : 2009	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2020	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 5798 : 2021	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4806 : 2012	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 1193 : 2006	Standard Specification for Reagent Water
ASTM D 4175 : 2018 : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2016	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 1193 : 1999	Standard Specification for Reagent Water
ASTM D 5854 : 2019 : REV A	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4806 : 2010 : REV B	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 5798 : 2014	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4175 : 2017	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4806 : 1999	Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2019	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 1193 : 2006 : R2018	Standard Specification for Reagent Water
ASTM D 4485 : 2009	Standard Specification for Performance of Engine Oils
ASTM D 4485 : 2019	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 4175 : 2015 : REV B : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4485 : 2010 : REV A	Standard Specification for Performance of Engine Oils
ASTM D 4485 : 2011	Standard Specification for Performance of Engine Oils
ASTM D 5854 : 1996 : R2015	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4175 : 2008 : REV B	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4485 : 2022 : EDT 1	Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 5798 : 2019 : REV B	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 5798 : 1999	Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
ASTM D 5798 : 2013	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4485 : 2007 : REV A	Standard Specification for Performance of Engine Oils

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

View more information

ASTM D 7563 : 2010 : R2016

Add To Cart

Access your standards online with a subscription