|
ASTM D 7423 : 2017
|
Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection |
|
ASTM D 7623 : 2010 : R2015
|
Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method |
|
ASTM D 7920 : 2015 : EDT 1
|
Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography |
|
ASTM D 2782 : 2017
|
Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method) |
|
ASTM D 5983 : 2018
|
Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Blending With Gasolines for Use as Automotive Spark-Ignition Engine Fuel |
|
ASTM D 1831 : 2019
|
Standard Test Method for Roll Stability of Lubricating Grease |
|
ASTM D 7622 : 2010 : R2015
|
Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction |
|
ASTM D 5966 : 2013
|
Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine (Withdrawn 2022) |
|
ASTM D 2983 : 2019
|
Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer |
|
ASTM D 7528 : 2017 : REV A
|
Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus |
|
ASTM D 2649 : 2004 : R2014
|
Standard Test Method for Corrosion Characteristics of Solid Film Lubricants |
|
ASTM D 217 : 2019 : REV A
|
Standard Test Methods for Cone Penetration of Lubricating Grease |
|
ASTM D 6074 : 2015
|
Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils |
|
ASTM D 5598 : 2018
|
Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling |
|
ASTM D 7684 : 2011 : R2016
|
Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants |
|
ASTM D 4998 : 2013
|
Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids |
|
ASTM D 8183 : 2018
|
Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method |
|
ASTM D 7112 : 2019
|
Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection) |
|
ASTM D 6557 : 2018
|
Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils |
|
ASTM D 2700 : 2019
|
Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
|
ASTM D 8181 : 2019
|
Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils |
|
ASTM D 7794 : 2018 : REV A
|
Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines |
|
ASTM D 6923 : 2018
|
Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure |
|
ASTM D 7421 : 2016
|
Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine |
|
ASTM D 4950 : 2014
|
Standard Classification and Specification for Automotive Service Greases |
|
ASTM D 5706 : 2016
|
Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
|
ASTM D 7170 : 2016
|
Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method (Withdrawn 2019) |
|
ASTM D 8074 : 2018
|
Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine |
|
ASTM D 7156 : 2017
|
Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine |
|
ASTM D 2982 : 2007 : R2013
|
Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils |
|
ASTM D 7217 : 2016
|
Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
|
ASTM D 2881 : 2019
|
Standard Classification for Metalworking Fluids and Related Materials |
|
ASTM D 7862 : 2019
|
Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel |
|
ASTM D 7666 : 2012
|
Standard Specification for Triglyceride Burner Fuel |
|
ASTM D 322 : 1997 : R2016
|
Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation (Withdrawn 2022) |
|
ASTM D 7546 : 2015
|
Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor |
|
ASTM D 8256 : 2019
|
Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions |
|
ASTM D 7594 : 2016
|
Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
|
ASTM D 6974 : 2016
|
Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures |
|
ASTM D 189 : 2006 : R2014
|
Standard Test Method for Conradson Carbon Residue of Petroleum Products |
|
ASTM D 7422 : 2017 : REV A
|
Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine |
|
ASTM D 974 : 2014 : EDT 2
|
Standard Test Method for Acid and Base Number by Color-Indicator Titration |
|
ASTM D 5797 : 2018
|
Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines |
|
ASTM D 7579 : 2009 : R2019
|
Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol |
|
ASTM D 5501 : 2012 : R2016
|
Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography |
|
ASTM D 6425 : 2017
|
Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine |
|
ASTM D 5967 : 2017
|
Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine |
|
ASTM D 5707 : 2016
|
Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
|
ASTM D 7577 : 2012 : R2016
|
Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends |
|
ASTM D 8227 : 2018
|
Standard Test Method for Determining the Coefficient of Friction of Synchronizer Lubricated by Mechanical Transmission Fluids (MTF) Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
|
ASTM D 6201 : 2018 : REV A
|
Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation |
|
ASTM D 6185 : 2011 : R2017
|
Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases |
|
ASTM D 7596 : 2014
|
Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester |
|
ASTM D 8047 : 2018
|
Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine |
|
ASTM C 781 : 2018
|
Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components |
|
ASTM D 1404/D1404M : 1999 : R2019
|
Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease |
|
ASTM D 2885 : 2019 : REV A
|
Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique |
|
ASTM D 4693 : 2007 : R2017
|
Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings |
|
ASTM D 4048 : 2016 : EDT 1
|
Standard Test Method for Detection of Copper Corrosion from Lubricating Grease |
|
ASTM D 6731 : 2018
|
Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer |
|
ASTM D 6894 : 2013
|
Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine (Withdrawn 2022) |
|
ASTM D 909 : 2018
|
Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline |
|
ASTM D 7563 : 2010 : R2016
|
Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel |
|
ASTM D 323 : 2015 : REV A
|
Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) |
|
ASTM D 7589 : 2016
|
Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine |
|
ASTM D 4814 : 2019
|
Standard Specification for Automotive Spark-Ignition Engine Fuel |
|
ASTM D 4012 : 2015
|
Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water |
|
ASTM D 613 : 2018 : REV A
|
Standard Test Method for Cetane Number of Diesel Fuel Oil |
|
ASTM D 4953 : 2015
|
Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method) |
|
ASTM D 86 : 2018
|
Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure |
|
ASTM F 2489 : 2006 : R2013
|
Standard Guide for Instrument and Precision Bearing Lubricants—Part 2 Greases |
|
ASTM D 7216 : 2019
|
Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers |
|
ASTM D8165 : 2019
|
Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
|
|
ASTM D 6890 : 2018
|
Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber |
|
ASTM D 8111 : 2019
|
Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine |
|
ASTM D 7846 : 2016
|
Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites |
|
ASTM D 2511 : 1993 : R2019
|
Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants |
|
ASTM D 4806 : 2019
|
Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel |
|
ASTM D 6081 : 2019
|
Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation |
|
ASTM D 6837 : 2013
|
Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine (Withdrawn 2022) |
|
ASTM D 7755 : 2011 : R2017
|
Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine |
|
ASTM D 7603 : 2013
|
Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils (Withdrawn 2022) |
|
ASTM D 5500 : 2018
|
Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation |
|
ASTM D 3705 : 2014
|
Standard Test Method for Misting Properties of Lubricating Fluids |
|
ASTM D 7923 : 2019
|
Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration |
|
ASTM D 524 : 2015
|
Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products |
|
ASTM D 2699 : 2019
|
Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel |
|
ASTM D 5482 : 2007 : R2013
|
Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method—Atmospheric) |
|
ASTM D 6743 : 2011 : R2015
|
Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids |
|
ASTM D 8049 : 2019
|
Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer |
|
ASTM D 8166 : 2017
|
Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters |
|
ASTM D 7317 : 2007 : R2019
|
Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method) |
|
ASTM D 6618 : 2016
|
Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine |
|
ASTM D 7690 : 2011 : R2017
|
Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography |
|
ASTM D 7342 : 2015
|
Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test) |
|
ASTM D 1401 : 2018 : REV B
|
Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
|
ASTM D 7620 : 2010 : R2015
|
Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection |
|
ASTM D 6448 : 2016
|
Standard Specification for Industrial Burner Fuels from Used Lubricating Oils |
|
ASTM D 7463 : 2018
|
Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water |
|
ASTM D 4055 : 2004 : R2019
|
Standard Test Method for Pentane Insolubles by Membrane Filtration |
|
ASTM D 6423 : 2019
|
Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends |
|
ASTM D 6681 : 2017
|
Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure |
|
ASTM D 8076 : 2018
|
Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines |
|
ASTM D 7155 : 2018
|
Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils |
|
ASTM D 8048 : 2019
|
Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine |
|
ASTM D 8148 : 2017
|
Standard Test Method for Spectroscopic Determination of Haze in Fuels |
|
ASTM D 4289 : 2013 : R2014 : EDT 1
|
Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids |
|
ASTM D 8112 : 2017
|
Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid |
|
ASTM D 7687 : 2017
|
Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration |
|
ASTM D 7847 : 2017
|
Standard Guide for Interlaboratory Studies for Microbiological Test Methods |
|
ASTM D 7482 : 2017
|
Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis |
|
ASTM D 8098 : 2017
|
Standard Test Method for Permanent Gases in C2 and C3 Hydrocarbon Products by Gas Chromatography and Pulse Discharge Helium Ionization Detector |
|
ASTM D 7898 : 2014
|
Standard Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery |
|
ASTM D 7721 : 2017
|
Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency |
|
ASTM D 3699 : 2018 : REV A
|
Standard Specification for Kerosine |
|
ASTM D 2709 : 2016
|
Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge |
|
ASTM D 6823 : 2008 : R2013
|
Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils |
|
ASTM D 2711 : 2017
|
Standard Test Method for Demulsibility Characteristics of Lubricating Oils |
|
ASTM D 6421 : 2018
|
Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure |
|
ASTM D 1403 : 2019
|
Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment |
|
ASTM D 6709 : 2015 : REV A
|
Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine) |