ASTM D 76 : 1999
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Tensile Testing Machines for Textiles
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
10-05-1999
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 07.01, 2005 Describes operating characteristics of CRE, CRT and CRL types of tensile testing machines used for determining force-elongation properties of textile materials.
| Committee |
D 13
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This specification covers the operating characteristics of three types of tensile testing machines used for the determination of the force-elongation properties of textile materials. These types of tensile testing machines are:
1.1.1 Constant-rate-of-extension, CRE.
1.1.2 Constant-rate-of-traverse, CRT.
1.1.3 Constant-rate-of-loading (force), CRL.
1.2 Specifications for tensile testing machines to measure other tensile-related properties of textile materials not covered by this standard are given in the ASTM standards using those machines.
1.3 The values stated in SI units are to be regarded as standard; the values in inch-pound units are provided as information only and are not exact equivalents.
1.4 The following safety hazards caveat pertains only to the test methods described in this specification: This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 1578 : 1993 : R2006 : EDT 1 | Standard Test Method for Breaking Strength of Yarn in Skein Form |
| ASTM D 2256/D2256M : 2010 : EDT 1 | Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method |
| ASTM D 2261 : 2013 : R2017 | Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine) |
| ASTM D 1294 : 2005 : R2013 | Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length (Withdrawn 2022) |
| ASTM D 3217/D3217M : 2015 : REDLINE | Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations |
| ASTM D 7005 : 2003 : R2008 | Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites |
| ASTM D 7142 : 2005 | Standard Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners |
| ASTM D 3885 : 2007 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method) |
| ASTM D 4964 : 1996 | Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine) |
| ASTM F 1752 : 1996 : R2001 | Standard Test Method for Archery Bow Component—Cord Material |
| ASTM D 628/D628M : 1995 : R2017 | Standard Specification for Asbestos Tubular Sleeving (Withdrawn 2022) |
| ASTM D 7269/D7269M : 2017 : REDLINE | Standard Test Methods for Tensile Testing of Aramid Yarns |
| ASTM C 1230 : 1996 : R2009 | Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads |
| ASTM D 628 : 1995 : R2004 : EDT 1 | Standard Specification for Asbestos Tubular Sleeving |
| ASTM D 5735 : 1995 : R2001 | Standard Test Method for Tearing Strength on Nonwoven Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine) (Withdrawn 2009) |
| ASTM D 4885 : 2001 | Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method |
| ASTM F 1752 : 1996 : R2014 | Standard Test Method for Archery Bow Component—Cord Material (Withdrawn 2023) |
| ASTM D 7842/D7842M : 2012 : R2016 | Standard Test Method for Holding Strength of Tack and Prong Fastener Attached Buttons |
| ASTM D 3885 : 2007 : REV A | Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method) |
| ASTM D 5169 : 1998 | Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners |
| ASTM D 1775 : 1994 | Standard Test Method for Tension and Elongation of Wide Elastic Fabrics (Constant-Rate-of-Load Type Tensile Testing Machine) (Withdrawn 2000) |
| ASTM F 1752 : 1996 : R2006 | Standard Test Method for Archery Bow Component-Cord Material |
| ASTM D 885M : 1995 | Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Man-Made Organic-Base Fibers (Metric) (Withdrawn 1998) |
| ASTM D 2653 : 2007 | Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines) |
| ASTM D 2731 : 2015 : REDLINE | Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines) |
| ASTM C 947 : 2003 : R2009 | Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading) |
| ASTM D 4595 : 2017 : REDLINE | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
| ASTM D 6775 : 2013 | Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material |
| ASTM D 375 : 1995 : R2004 : EDT 1 | Standard Specification for Asbestos Roving |
| ASTM D 2229 : 2010 | Standard Test Method for Adhesion Between Steel Tire Cords and Rubber |
| ASTM D 3334 : 1980 | Methods of Testing Fabrics Woven from Polyolefin Monofilaments (Withdrawn 1990) |
| ASTM D 5587 : 2015 : REDLINE | TEST METHOD FOR TEARING STRENGTH OF FABRICS BY TRAPEZOID PROCEDURE |
| ASTM D 5035 : 2011 : R2015 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
| ASTM D 4268 : 1993 | Standard Test Methods for Testing Fiber Ropes (Withdrawn 2002) |
| ASTM D 7005 : 2003 | Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites |
| ASTM D 1871 : 2004 : R2014 | Standard Test Method for Adhesion Between Tire Bead Wire and Rubber (Withdrawn 2023) |
| ASTM D 4830/D4830M : 1998 : R2014 : EDT 1 | Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing |
| ASTM D 7842/D7842M : 2012 | Standard Test Method for Holding Strength of Tack and Prong Fastener Attached Buttons |
| ASTM D 2969 : 2004 : R2014 | Standard Test Methods for Steel Tire Cords (Withdrawn 2023) |
| ASTM D 4885 : 2001 : R2006 | Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method |
| ASTM D 4846 : 1996 : R2004 | Standard Test Method for Resistance to Unsnapping of Snap Fasteners |
| ASTM D 461 : 1993 | Standard Test Methods for Felt (Withdrawn 2004) |
| ASTM D 4594 : 1996 : R2003 | Standard Test Method for Effects of Temperature on Stability of Geotextiles |
| ASTM D 5034 : 2009 : R2013 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 2229 : 2010 : R2014 | Standard Test Method for Adhesion Between Steel Tire Cords and Rubber (Withdrawn 2023) |
| ASTM D 7744/D7744M : 2011 | Standard Test Methods for Tensile Testing of High Performance Polyethylene Tapes |
| ASTM D 204 : 2002 | Standard Test Methods for Sewing Threads |
| ASTM C 947 : 2003 : R2016 | Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading) |
| ASTM D 3885 : 2007 : REV A : R2015 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method) |
| ASTM D 1294 : 2005 | Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length |
| ASTM D 6768 : 2004 | Standard Test Method for Tensile Strength of Geosynthetic Clay Liners |
| ASTM D 5169 : 1998 : R2010 | Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners |
| ASTM D 5494 : 1993 : R1999 | Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes |
| ASTM D 5035 : 2011 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
| ASTM F 1648 : 1995 : R2008 | Standard Test Methods for Archery Bowstring Component-Serving String Material |
| ASTM D 299/D299M : 2004 : R2009 : EDT 1 | Standard Specification for Asbestos Yarns |
| ASTM D 2612 : 1999 : R2011 | Standard Test Method for Fiber Cohesion in Sliver and Top (Static Tests) |
| ASTM C 1230 : 1996 : R2004 | Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads |
| ASTM D 375/D375M : 1995 : R2009 : EDT 1 | Standard Specification for Asbestos Roving |
| ASTM F 1752 : 1996 : R2010 | Standard Test Method for Archery Bow Component-Cord Material |
| ASTM D 885/D885M : 2010 | Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers |
| ASTM D 4846 : 1996 : R2011 | Standard Test Method for Resistance to Unsnapping of Snap Fasteners |
| ASTM D 885/D885M : 2010 : REV A : R2014 : EDT 1 | Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers (Withdrawn 2023) |
| ASTM D 6320/D6320M : 2010 : R2014 | Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel (Withdrawn 2023) |
| ASTM D 1578 : 1993 : R2000 | Standard Test Method for Breaking Strength of Yarn in Skein Form |
| ASTM D 2061 : 2007 : R2013 | Standard Test Methods for Strength Tests for Zippers |
| ASTM D 2724 : 2007 : R2015 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 2724 : 2007 : R2011 : EDT 1 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM F 1752 : 1996 | Standard Test Method for Archery Bow Component—Cord Material |
| ASTM D 4964 : 1996 : R2012 : EDT 1 | Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine) |
| ASTM D 2970 : 2002 | Standard Test Method for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments |
| ASTM D 2969 : 2004 : R2010 | Standard Test Methods for Steel Tire Cords |
| ASTM C 203 : 2005 : REV A : R2012 | Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation |
| ASTM C 203 : 2005 : REV A : R2017 | Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation |
| ASTM D 2256/D2256M : 2010 : R2015 | Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method |
| ASTM D 2724 : 2007 : R2011 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 2724 : 2007 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 434 : 1995 | Standard Test Method for Resistance to Slippage of Yarns in Woven Fabrics Using a Standard Seam (Withdrawn 2004) |
| ASTM D 6213 : 2017 : REDLINE | Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids |
| BS ISO 7198:1998 | Cardiovascular implants. Tubular vascular prostheses |
| ASTM D 4028/D4028M : 2013 : REDLINE | Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn |
| ASTM C 1230 : 1996 | Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads |
| ASTM D 299 : 2004 : EDT 1 | Standard Specification for Asbestos Yarns |
| ASTM D 2262 : 1983 | Test Method for Tearing Strength of Woven Fabrics by the Tongue (Single Rip) Method (Constant-Rate-of-Traverse Tensile Testing Machine) (Withdrawn 1995) |
| ASTM D 1578 : 1993 | Standard Test Method for Breaking Strength of Yarn in Skein Form |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| ASTM PS 79 : 1996 | Provisional Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners (Withdrawn 2000) |
| ASTM D 375 : 1995 : R2004 | Standard Specification for Asbestos Roving |
| ASTM D 3940 : 1983 | Test Method for Bursting Strength (Load) and Elongation of Sewn Semas of Knit or Woven Stretch Textile Fabrics (Withdrawn 1995) |
| ASTM D 6320/D6320M : 2010 | Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel |
| ASTM D 2969 : 2004 | Standard Test Methods for Steel Tire Cords |
| ASTM D 5494 : 1993 : R1999 : EDT 1 | Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes |
| ASTM D 628 : 1995 : R1999 | Standard Specification for Asbestos Tubular Sleeving |
| ASTM D 885/D885M : 2010 : REV A : R2014 | Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers |
| ASTM D 204 : 2002 : R2010 | Standard Test Methods for Sewing Threads |
| ASTM D 4830 : 1998 | Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing |
| ASTM D 7003 : 2003 : R2008 | Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes |
| ASTM D 5494 : 1993 : R2011 | Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes |
| ASTM D 5169 : 1998 : R2015 | Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners |
| ASTM D 7142 : 2005 : R2016 | Standard Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners |
| ASTM D 3936 : 2017 : REDLINE | Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering |
| ASTM D 6320 : 2004 | Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel |
| ASTM D 4885 : 2001 : R2011 | Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method |
| ASTM D 2612 : 1999 : R2005 | Standard Test Method for Fiber Cohesion in Sliver and Top in Static Tests |
| ASTM D 1774 : 1994 | Standard Test Methods for Elastic Properties of Textile Fibers (Withdrawn 2000) |
| ASTM F 1648 : 1995 : R2013 | Standard Test Methods for Archery Bowstring Component—Serving String Material (Withdrawn 2022) |
| ASTM D 2612 : 1999 | Standard Test Method for Fiber Cohesion in Sliver and Top in Static Tests |
| ASTM D 7747 : 2011 | Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method |
| ASTM D 2653 : 2007 : R2012 | Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines) |
| ASTM D 299 : 2004 | Standard Specification for Asbestos Yarns |
| ASTM D 2970/D2970M : 2004 | Standard Test Method for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments |
| ASTM D 4846 : 1996 : R2016 | Standard Test Method for Resistance to Unsnapping of Snap Fasteners |
| ASTM D 7004 : 2003 | Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes |
| ASTM D 4964 : 1996 : R2012 | Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine) |
| ASTM D 2261 : 2013 | Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine) |
| ASTM D 578 : 2005 | Standard Specification for Glass Fiber Strands |
| ASTM D 5735 : 1995 | Standard Test Method for Tearing Strength on Nonwoven Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine) |
| ASTM D 541 : 1987 : EDT 1 | Specification for Single Jute Yarn |
| ASTM D 6588/D6588M : 2011 | Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test) |
| ASTM D 4964 : 1996 : R2016 | Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine) |
| ASTM D 628 : 1995 : R2004 | Standard Specification for Asbestos Tubular Sleeving |
| ASTM D 4393 : 2004 | Standard Test Method for Strap Peel Adhesion of Reinforcing Cords or Fabrics to Rubber Compounds |
| ASTM D 2256/D2256M : 2010 | Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method |
| ASTM D 5494 : 1993 : R2006 | Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes |
| ASTM D 2016 : 1974 : R1983 | Methods of Test for Moisture Content of Wood (Withdrawn 1987) |
| ASTM D 2101 : 1994 | Test Method for Tensile Properties of Single Man-Made Textile Fibers Taken from Yarns and Tows (Withdrawn 1995) |
| ASTM D 204 : 2002 : R2010 : EDT 1 | Standard Test Methods for Sewing Threads |
| ASTM C 203 : 2005 | Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation |
| ASTM D 2970/D2970M : 2004 : R2014 | Standard Test Methods for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments (Withdrawn 2023) |
| ASTM D 4159 : 1982 | Test Method for Resistance to Yarn Slippage in Woven Upholstery Fabrics Plain, Tufted, or Flocked (Using a Simulated Seam) (Withdrawn 1989) |
| ASTM C 1230 : 1996 : R2015 | Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads |
| ASTM D 4964 : 1996 : R2008 : EDT 2 | Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine) |
| ASTM D 7004 : 2003 : R2008 | Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes |
| ASTM C 203 : 2005 : REV A | Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation |
| ASTM D 4846 : 1996 | Standard Test Method for Resistance to Unsnapping of Snap Fasteners |
| ASTM D 7142 : 2005 : R2011 | Standard Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners |
| ASTM D 375 : 1995 : R1999 | Standard Specification for Asbestos Roving |
| ASTM D 7506/D7506M : 2017 : REDLINE | Standard Test Method for Pocket Reinforcement |
| ASTM D 3822/D3822M : 2014 : REDLINE | Standard Test Method for Tensile Properties of Single Textile Fibers |
| ASTM D 4975 : 2014 : REDLINE | Standard Test Methods for Single-Filament Tire Bead Wire Made from Steel |
| ASTM C 947 : 2003 | Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading) |
| ASTM D 1683/D1683M : 2017-04 | TEST METHOD FOR FAILURE IN SEWN SEAMS OF WOVEN FABRICS |
| ASTM D 5034 : 2009 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 4964 : 1996 : R2008 : EDT 1 | Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine) |
| ASTM D 3787 : 2016 : REDLINE | Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test |
| ASTM D 4034 : 1992 | Standard Test Method for Resistance to Yarn Slippage at the Sewn Seam in Woven Upholstery Fabrics (Withdrawn 2001) |
| ASTM D 4912/D4912M : 2014 : REDLINE | Standard Test Method for Fabric Stability of Vinyl-Coated Glass Yarn Insect Screening and Louver Cloth |
| ASTM D 6775 : 2013 : R2017 | Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material |
| ASTM D 5494 : 1993 : R2018 | Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes |
| ASTM D 4777 : 1988 | Test Method For Adhesion Of Tire Cords And Other Reinforcing Cords To Rubber Compounds By Hot U-Test Procedure (Withdrawn 1994) |
| ASTM D 1871 : 2004 | Standard Test Method for Adhesion Between Tire Bead Wire and Rubber |
| ASTM D 202 : 2017 : REDLINE | Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation |
| ASTM D 1578 : 1993 : R2016 | Standard Test Method for Breaking Strength of Yarn in Skein Form |
| ASTM D 1871 : 2004 : R2010 | Standard Test Method for Adhesion Between Tire Bead Wire and Rubber |
| ASTM D 8054/D8054M : 2016 | Standard Test Methods for Tensile Testing of Para-Aramid Flat Yarns |
| ASTM D 1682 : 1964 | TEST METHODS FOR BREAKING LOAD AND ELONGATION OF TEXTILE FABRICS |
| ASTM D 6588 : 2002 | Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test) |
| ASTM D 2061 : 2007 | Standard Test Methods for Strength Tests for Zippers |
| ASTM D 3885 : 2007 : REV A : R2011 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method) |
| ASTM D 885/D885M : 2010 : REV A | Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 4594 : 1996 | Standard Test Method for Effects of Temperature on Stability of Geotextiles |
| ASTM D 299/D299M : 2004 : R2017 | Standard Specification for Asbestos Yarns (Withdrawn 2022) |
| ASTM D 5169 : 1998 : R2004 | Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners |
| ASTM D 2970/D2970M : 2004 : R2010 | Standard Test Method for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments |
| ASTM D 1578 : 1993 : R2011 | Standard Test Method for Breaking Strength of Yarn in Skein Form |
| ASTM D 2261 : 2013 : R2017 : EDT 1 | Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine) |
| ASTM D 5733 : 1999 | Standard Test Method for Tearing Strength of Nonwoven Fabrics by the Trapezoid Procedure (Withdrawn 2008) |
| ASTM D 204 : 2002 : R2016 | Standard Test Methods for Sewing Threads |
| ASTM D 7812 : 2016 | Standard Test Method for Tensile Testing of Aramid Paper |
| ASTM D 5034 : 2009 : R2017 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 6588/D6588M : 2011 : R2016 | Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test) |
| ASTM D 7003 : 2003 | Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes |
| ASTM D 4594 : 1996 : R2009 | Standard Test Method for Effects of Temperature on Stability of Geotextiles |
| ASTM D 375/D375M : 1995 : R2017 | Standard Specification for Asbestos Roving (Withdrawn 2022) |
| ASTM D 628/D628M : 1995 : R2009 : EDT 1 | Standard Specification for Asbestos Tubular Sleeving |
| ASTM D 4964 : 1996 : R2004 | Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine) |
| ASTM D 4776/D4776M : 2018 : REDLINE | Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure |
| ASTM F 1648 : 1995 | Standard Test Methods for Archery Bowstring Component-Serving String Material |
| ASTM F 1648 : 1995 : R2003 | Standard Test Methods for Archery Bowstring Component-Serving String Material |
| ASTM D 6768 : 2004 : R2009 | Standard Test Method for Tensile Strength of Geosynthetic Clay Liners |
| ASTM D 580 : 2004 | Standard Specification for Greige Woven Glass Tapes and Webbings |
| ASTM D 1578 : 1993 | Standard Test Method for Breaking Strength of Yarn in Skein Form |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.