ASTM D 7862 : 2019

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel

Available format(s): Hardcopy, PDF

Superseded date: 17-04-2021

Language(s): English

Published date: 15-05-2019

Publisher: American Society for Testing and Materials

Abstract - (Show below) - (Hide below)

1.1This specification covers butanol intended to be blended with gasoline at 1 % to 12.5 % by volume for use as an automotive spark-ignition engine fuel.

Scope - (Show below) - (Hide below)

1.1This specification covers butanol intended to be blended with gasoline at 1 % to 12.5 % by volume for use as an automotive spark-ignition engine fuel.

1.1.1Butanol contains 22 % by mass oxygen. The mass percent of oxygen of a butanol blend with gasoline depends on the volume percent of butanol blended, the density of the butanol isomer, and the density of the base blendstock.

1.1.2The maximum limit on blending is not a performance limit but a current regulatory limit in the United States.

1.2This specification covers three butanol isomers:1-butanol, 2-butanol, and 2-methyl-1-propanol. This specification specifically excludes 2-methyl-2-propanol (that is, tert-butyl alcohol).

1.2.1Tert-butyl alcohol has different physical properties (melting point, water miscibility) than the other three isomers.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Product Information - (Show below) - (Hide below)

Committee	D 02
Document Type	Standard
ISBN
Pages
Published
Publisher	American Society for Testing and Materials
Status	Superseded
Superseded By	ASTM D 7862 : 2021
Supersedes	ASTM D 7862 : 2018

Standards Referenced By This Book - (Show below) - (Hide below)

ASTM D 8076 : 2018	Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
ASTM D 7875 : 2020	Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography
ASTM D 8181 : 2019	Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils
ASTM D 7875 : 2014	Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography

Standards Referencing This Book - (Show below) - (Hide below)

ASTM D 4175 : 2020	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2014	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4057 : 2019	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 2622 : 1992 : EDT 1	Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 4175 : 2009 : REV A : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2008 : REV B : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 5453 : 2009	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4057 : 1995	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 7875 : 2014	Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography
ASTM D 2622 : 1987 : EDT 1	Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 4175 : 2005	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4814 : 2004	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6299 : 2010	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3120 : 1996	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 4175 : 2005 : EDT 2	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 1298 : 2012 : REV A	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 6299 : 2013 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4814 : 2016 : REV C	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM E 1064 : 2012	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 3120 : 2008	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 4177 : 2016 : EDT 1	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 5453 : 2008 : REV B	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 5453 : 2000	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 4175 : 2015 : REV C	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 6299 : 2017 : REV A	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4814 : 2014 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2017 : REV A : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 6299 : 2017 : REV B	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4814 : 2001	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4052 : 1996 : R2002 : EDT 1	Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D 6299 : 2009	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7923 : 2019	Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
ASTM D 4814 : 2004 : REV B : EDT 1	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1298 : 2012 : REV B	Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 5453 : 2004	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 4814 : 2015 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2000 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4177 : 1995	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 7319 : 2011 : EDT 1	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 4175 : 2008 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2020 : REV A	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4057 : 2012 : R2018	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 5453 : 2012	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4052 : 2018 : REV A	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 4814 : 2011 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4306 : 1997	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 6299 : 2013	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4175 : 2017 : REV B	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4306 : 2015	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM E 1064 : 2000	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 4175 : 2009	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM E 1064 : 2005	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM E 29 : 2002	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 2622 : 1998	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4814 : 2018 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5854 : 1996 : R2010	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 6299 : 2010 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4175 : 2009 : REV A : EDT 4	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2009 : REV A : EDT 3	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 1298 : 1999 : R2005	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 4052 : 2009	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 4057 : 1981 : EDT 2	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 5453 : 2008 : REV A	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM E 1064 : 2004	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 4814 : 2018	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1298 : 2012 : REV B : R2017	Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 1298 : 2012	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 5854 : 2019	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4306 : 2001	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 1613 : 1996 : R1999	Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 4814 : 1995 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2009	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2622 : 2008	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4175 : 2018	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4814 : 2016 : REV : EDT 0	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4306 : 2007	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 1298 : 1999 : EDT 2	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 1613 : 2003	Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 4175 : 2001 : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4814 : 2020 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5453 : 2005	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 5854 : 1996 : R2005	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4175 : 2001	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2005 : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4814 : 2012	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2016	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3120 : 2008 : R2019	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 7923 : 2017 : REV A : EDT 1	Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
ASTM D 4814 : 2010 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2003 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2002	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4814 : 2001 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6299 : 2000	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2010 : EDT 2	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 1298 : 1999	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 5453 : 2006	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4814 : 2008 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6299 : 2016	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7319 : 2007	Standard Test Method for Determination of Total and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 4814 : 2003	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4057 : 2006	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4175 : 2015	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2002 : REV A : EDT 2	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4177 : 2015	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4814 : 2020	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2004 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2016 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3120 : 2003	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 4052 : 2011	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 6299 : 2019	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4306 : 2012 : REV A	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 7923 : 2017 : REV A	Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
ASTM D 4052 : 2016	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 4814 : 2010 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2008	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4057 : 2012	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 6299 : 2000 : REV A	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 2622 : 2003	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 5453 : 2016	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4175 : 2009 : REV A : EDT 5	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2016 : REV C	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4306 : 2012 : REV B	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 4175 : 2015 : REV B	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 7319 : 2017	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
ASTM D 4814 : 2009 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 7319 : 2009	Standard Test Method for Determination of Total and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 4175 : 2015 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 3120 : 2003 : REV A	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 1298 : 1999 : EDT 1	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 4814 : 2011	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5453 : 2003	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 4814 : 2008 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2009 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4814 : 2002	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2016 : REV B	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4814 : 2011 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6299 : 2020	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4177 : 1995 : R2010	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4814 : 2019	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2002 : REV A : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2008	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM E 1064 : 2008	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 6299 : 2008	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4814 : 2006 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2002 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4814 : 2007	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4177 : 1995 : R2000	Standard Practice for Automatic Sampling of Peroleum and Petroleum Products
ASTM D 5453 : 2016 : EDT 1	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4175 : 2000 : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4814 : 2018 : REV D	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2016 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2016 : REV A	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4814 : 2006	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5854 : 1996 : R2000	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 1613 : 2002	Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 1613 : 2006	Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 4814 : 1992 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1613 : 2006 : R2012	Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 6299 : 2002 : EDT 1	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4814 : 2014 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2015	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 7319 : 2011	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 4052 : 1996	Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D 7319 : 2012	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 4175 : 2019 : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4814 : 2007 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2622 : 2010	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4814 : 2009 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2018 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2013 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2016 : REV D	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2017	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2000	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5453 : 2019 : REV A	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 3120 : 1996 : R2002 : EDT 1	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM E 1064 : 2004 : REV A	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 2622 : 2007	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4175 : 2017 : REV A	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4814 : 2013	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3120 : 2006 : EDT 1	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 4306 : 2013	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 2622 : 1994	Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 4814 : 2004 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3120 : 2006	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 4175 : 2009 : REV A : EDT 2	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 2622 : 2005	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4177 : 2016	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4306 : 2020	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 4177 : 1995 : R2005	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 5453 : 2019	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4175 : 2018 : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 1298 : 1985 : R1990 : EDT 1	Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 4175 : 2016	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 5854 : 2019 : REV A	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4814 : 1993 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2019 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6299 : 2007	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4052 : 2015	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 6299 : 2007 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4057 : 1995 : R2000	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 3120 : 2008 : R2014	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 4814 : 2014	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2017	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 6299 : 2017	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4175 : 2019	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4177 : 2015 : REV A	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4814 : 2018 : REV C	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1613 : 2017	Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 4057 : 2006 : R2011	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4175 : 2015 : REV B : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 7923 : 2017	Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
ASTM D 5453 : 2003 : REV A	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 7923 : 2016	Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
ASTM E 1064 : 2016	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 4814 : 2007 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2013 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5854 : 1996 : R2015	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4052 : 2018	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 7319 : 2013	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
ASTM D 4175 : 2008 : REV B	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4306 : 2012	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 2622 : 2016	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 5453 : 2008	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 6299 : 2002	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 5453 : 2000 : EDT 1	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 4306 : 2012 : REV C	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account

Abstract - (Show below) - (Hide below)

1.1This specification covers butanol intended to be blended with gasoline at 1 % to 12.5 % by volume for use as an automotive spark-ignition engine fuel.

Scope - (Show below) - (Hide below)

1.1This specification covers butanol intended to be blended with gasoline at 1 % to 12.5 % by volume for use as an automotive spark-ignition engine fuel.

1.1.2The maximum limit on blending is not a performance limit but a current regulatory limit in the United States.

1.2This specification covers three butanol isomers:1-butanol, 2-butanol, and 2-methyl-1-propanol. This specification specifically excludes 2-methyl-2-propanol (that is, tert-butyl alcohol).

1.2.1Tert-butyl alcohol has different physical properties (melting point, water miscibility) than the other three isomers.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

General Product Information - (Show below) - (Hide below)

Committee	D 02
Document Type	Standard
ISBN
Pages
Published
Publisher	American Society for Testing and Materials
Status	Superseded
Superseded By	ASTM D 7862 : 2021
Supersedes	ASTM D 7862 : 2018

Standards Referenced By This Book - (Show below) - (Hide below)

ASTM D 8076 : 2018	Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
ASTM D 7875 : 2020	Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography
ASTM D 8181 : 2019	Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils
ASTM D 7875 : 2014	Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography

Standards Referencing This Book - (Show below) - (Hide below)

ASTM D 4175 : 2020	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2014	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4057 : 2019	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 2622 : 1992 : EDT 1	Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 4175 : 2009 : REV A : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2008 : REV B : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 5453 : 2009	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4057 : 1995	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 7875 : 2014	Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography
ASTM D 2622 : 1987 : EDT 1	Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 4175 : 2005	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4814 : 2004	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6299 : 2010	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3120 : 1996	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 4175 : 2005 : EDT 2	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 1298 : 2012 : REV A	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 6299 : 2013 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4814 : 2016 : REV C	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM E 1064 : 2012	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 3120 : 2008	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 4177 : 2016 : EDT 1	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 5453 : 2008 : REV B	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 5453 : 2000	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 4175 : 2015 : REV C	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 6299 : 2017 : REV A	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4814 : 2014 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2017 : REV A : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 6299 : 2017 : REV B	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4814 : 2001	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4052 : 1996 : R2002 : EDT 1	Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D 6299 : 2009	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7923 : 2019	Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
ASTM D 4814 : 2004 : REV B : EDT 1	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1298 : 2012 : REV B	Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 5453 : 2004	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 4814 : 2015 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2000 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4177 : 1995	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 7319 : 2011 : EDT 1	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 4175 : 2008 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2020 : REV A	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4057 : 2012 : R2018	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 5453 : 2012	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4052 : 2018 : REV A	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 4814 : 2011 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4306 : 1997	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 6299 : 2013	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4175 : 2017 : REV B	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4306 : 2015	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM E 1064 : 2000	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 4175 : 2009	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM E 1064 : 2005	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM E 29 : 2002	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 2622 : 1998	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4814 : 2018 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5854 : 1996 : R2010	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 6299 : 2010 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4175 : 2009 : REV A : EDT 4	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2009 : REV A : EDT 3	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 1298 : 1999 : R2005	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 4052 : 2009	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 4057 : 1981 : EDT 2	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 5453 : 2008 : REV A	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM E 1064 : 2004	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 4814 : 2018	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1298 : 2012 : REV B : R2017	Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 1298 : 2012	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 5854 : 2019	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4306 : 2001	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 1613 : 1996 : R1999	Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 4814 : 1995 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2009	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2622 : 2008	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4175 : 2018	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4814 : 2016 : REV : EDT 0	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4306 : 2007	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 1298 : 1999 : EDT 2	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 1613 : 2003	Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 4175 : 2001 : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4814 : 2020 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5453 : 2005	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 5854 : 1996 : R2005	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4175 : 2001	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2005 : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4814 : 2012	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2016	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3120 : 2008 : R2019	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 7923 : 2017 : REV A : EDT 1	Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
ASTM D 4814 : 2010 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2003 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2002	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4814 : 2001 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6299 : 2000	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2010 : EDT 2	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 1298 : 1999	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 5453 : 2006	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4814 : 2008 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6299 : 2016	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7319 : 2007	Standard Test Method for Determination of Total and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 4814 : 2003	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4057 : 2006	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4175 : 2015	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2002 : REV A : EDT 2	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4177 : 2015	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4814 : 2020	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2004 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2016 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3120 : 2003	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 4052 : 2011	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 6299 : 2019	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4306 : 2012 : REV A	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 7923 : 2017 : REV A	Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
ASTM D 4052 : 2016	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 4814 : 2010 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2008	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4057 : 2012	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 6299 : 2000 : REV A	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 2622 : 2003	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 5453 : 2016	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4175 : 2009 : REV A : EDT 5	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2016 : REV C	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4306 : 2012 : REV B	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 4175 : 2015 : REV B	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 7319 : 2017	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
ASTM D 4814 : 2009 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 7319 : 2009	Standard Test Method for Determination of Total and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 4175 : 2015 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 3120 : 2003 : REV A	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 1298 : 1999 : EDT 1	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 4814 : 2011	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5453 : 2003	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 4814 : 2008 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2009 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4814 : 2002	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2016 : REV B	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4814 : 2011 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6299 : 2020	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4177 : 1995 : R2010	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4814 : 2019	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2002 : REV A : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2008	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM E 1064 : 2008	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 6299 : 2008	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4814 : 2006 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2002 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4814 : 2007	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4177 : 1995 : R2000	Standard Practice for Automatic Sampling of Peroleum and Petroleum Products
ASTM D 5453 : 2016 : EDT 1	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4175 : 2000 : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4814 : 2018 : REV D	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2016 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2016 : REV A	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4814 : 2006	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5854 : 1996 : R2000	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 1613 : 2002	Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 1613 : 2006	Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 4814 : 1992 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1613 : 2006 : R2012	Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 6299 : 2002 : EDT 1	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4814 : 2014 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2015	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 7319 : 2011	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 4052 : 1996	Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D 7319 : 2012	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 4175 : 2019 : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4814 : 2007 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2622 : 2010	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4814 : 2009 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2018 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2013 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2016 : REV D	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2017	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2000	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5453 : 2019 : REV A	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 3120 : 1996 : R2002 : EDT 1	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM E 1064 : 2004 : REV A	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 2622 : 2007	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4175 : 2017 : REV A	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4814 : 2013	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3120 : 2006 : EDT 1	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 4306 : 2013	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 2622 : 1994	Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 4814 : 2004 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3120 : 2006	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 4175 : 2009 : REV A : EDT 2	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 2622 : 2005	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4177 : 2016	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4306 : 2020	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 4177 : 1995 : R2005	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 5453 : 2019	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4175 : 2018 : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 1298 : 1985 : R1990 : EDT 1	Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 4175 : 2016	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 5854 : 2019 : REV A	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4814 : 1993 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2019 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6299 : 2007	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4052 : 2015	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 6299 : 2007 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4057 : 1995 : R2000	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 3120 : 2008 : R2014	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 4814 : 2014	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4175 : 2017	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 6299 : 2017	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4175 : 2019	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4177 : 2015 : REV A	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4814 : 2018 : REV C	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1613 : 2017	Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 4057 : 2006 : R2011	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4175 : 2015 : REV B : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 7923 : 2017	Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
ASTM D 5453 : 2003 : REV A	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 7923 : 2016	Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
ASTM E 1064 : 2016	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 4814 : 2007 : REV B	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2013 : REV A	Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5854 : 1996 : R2015	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4052 : 2018	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 7319 : 2013	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
ASTM D 4175 : 2008 : REV B	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4306 : 2012	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 2622 : 2016	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 5453 : 2008	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 6299 : 2002	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 5453 : 2000 : EDT 1	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 4306 : 2012 : REV C	Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

View more information

ASTM D 7862 : 2019

Add To Cart

Access your standards online with a subscription