Skip to content
Please enter a keyword to search

  • ASTM D 8085 : 2017

    Current The latest, up-to-date edition.

    Standard Specification for Non-Aqueous Engine Coolant for Automobile and Light-Duty Service

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2017

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 15.05, 2017 Defines the requirements for nonaqueous engine coolants used in automobiles or other lightduty service cooling systems.

    Scope - (Show below) - (Hide below)

    1.1This specification covers the requirements for non-aqueous engine coolants used in automobiles or other light-duty service cooling systems. Non-aqueous coolants that conform to the specification will function effectively to provide protection against freezing, boiling, and corrosion without any further dilution. This specification is based upon the knowledge of the performance of non-aqueous engine coolants prepared from new individual or mixtures of virgin industrial grade diols.

    1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

    1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See X1.4 for a specific warning statement.

    General Product Information - (Show below) - (Hide below)

    Committee D 15
    Document Type Standard
    Publisher American Society for Testing and Materials
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 8116 : 2018 Standard Specification for Fully-Formulated Non-Aqueous Engine Coolant for Heavy-Duty Engines (Withdrawn 2019)

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 1122 : 2016 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
    ASTM D 2983 : 2019 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
    ASTM D 2983 : 2002 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
    ASTM D 1123 : 1999 : R2009 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
    ASTM D 5931 : 1996 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
    ASTM D 7840 : 2012 Standard Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware
    ASTM D 1122 : 2016 : R2017 : EDT 1 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
    ASTM D 2983 : 2017 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
    ASTM D 7896 : 2014 Standard Test Method for Thermal Conductivity, Thermal Diffusivity and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
    ASTM D 1122 : 2020 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
    ASTM D 1122 : 2008 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
    ASTM D 1287 : 2011 : R2020 Standard Test Method for pH of Engine Coolants and Antirusts
    ASTM D 1120 : 1994 : R1998 Standard Test Method for Boiling Point of Engine Coolants
    ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
    ASTM D 1120 : 2011 Standard Test Method for Boiling Point of Engine Coolants
    ASTM D 1287 : 1991 : R1997 : EDT 1 Standard Test Method for pH of Engine Coolants and Antirusts
    ASTM D 1122 : 2022 Standard Test Method for Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
    ASTM D 3634 : 1999 : R2009 Standard Test Method for Trace Chloride Ion in Engine Coolants
    ASTM D 1287 : 2009 Standard Test Method for pH of Engine Coolants and Antirusts
    ASTM D 1122 : 1997 : REV A Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
    ASTM D 2983 : 2002 : REV A Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
    ASTM D 2983 : 2002 : REV B Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
    ASTM D 4725 : 2011 Standard Terminology for Engine Coolants
    ASTM D 1123 : 2022 : REV A Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
    ASTM D 1120 : 1994 : R1998 : EDT 1 Standard Test Method for Boiling Point of Engine Coolants
    ASTM D 1119 : 2005 : R2015 Standard Test Method for Percent Ash Content of Engine Coolants
    ASTM D 1120 : 2008 Standard Test Method for Boiling Point of Engine Coolants
    ASTM E 29 : 2002 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
    ASTM D 1122 : 2013 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
    ASTM D 1123 : 1999 : R2003 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
    ASTM D 1287 : 2011 Standard Test Method for pH of Engine Coolants and Antirusts
    ASTM D 3634 : 1999 : R2005 Standard Test Method for Trace Chloride Ion in Engine Coolants
    ASTM D 1121 : 2007 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
    ASTM D 1123 : 2022 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
    ASTM D 1882 : 1996 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
    ASTM D 5931 : 1996 : R2002 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
    ASTM D 1120 : 2017 : REDLINE Standard Test Method for Boiling Point of Engine Coolants
    ASTM D 4725 : 1998 Standard Terminology for Engine Coolants
    ASTM D 93 : 2019 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
    ASTM D 1121 : 2011 : R2020 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
    ASTM D 1882 : 1996 : R2006 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
    ASTM D 4725 : 2015 : REDLINE Standard Terminology for Engine Coolants and Related Fluids
    ASTM D 1121 : 1967 Standard Method Of Test For Reserve Alkalinity Of Engine Antifreezes And Antirusts
    ASTM D 5827 : 2009 : EDT 1 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
    ASTM D 93 : 1990 : EDT 1 Standard Test Methods for Flash Point by Pensky-Martens Closed Tester
    ASTM D 7840 : 2012 : R2017 Standard Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware
    ASTM D 1287 : 2011 : REDLINE Standard Test Method for pH of Engine Coolants and Antirusts
    ASTM D 1123 : 1999 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
    ASTM D 1119 : 2005 : R2009 Standard Test Method for Percent Ash Content of Engine Coolants
    ASTM D 1882 : 1996 : R2001 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
    ASTM D 5827 : 2022 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
    ASTM D 1123 : 1999 : R2015 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
    ASTM D 3634 : 1999 : R2005 : EDT 1 Standard Test Method for Trace Chloride Ion in Engine Coolants
    ASTM D 2983 : 2020 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
    ASTM D 1882 : 2017 : R2021 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
    ASTM D 7935/D7935M : 2014 Standard Test Method for Corrosion Test for Non-Aqueous Engine Coolants in Glassware
    ASTM D 1120 : 1994 : R2004 Standard Test Method for Boiling Point of Engine Coolants
    ASTM D 7896 : 2019 Standard Test Method for Thermal Conductivity, Thermal Diffusivity, and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
    ASTM D 1121 : 2011 : REDLINE Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
    ASTM D 1882 : 2017 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
    ASTM D 4725 : 2006 Standard Terminology for Engine Coolants
    ASTM D 1119 : 2005 Standard Test Method for Percent Ash Content of Engine Coolants
    ASTM D 1882 : 1996 : R2012 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
    ASTM D 1123 : 1959 : R1968 Standard Method Of Test For Water In Concentrated Engine Antifreezes By The Iodine Reagent Method
    ASTM D 2983 : 2004 : REV A Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
    ASTM D 4725 : 2015 Standard Terminology for Engine Coolants and Related Fluids
    ASTM D 1119 : 2000 Standard Test Method for Percent Ash Content of Engine Coolants and Antirusts
    ASTM D 1119 : 2022 Standard Test Method for Percent Ash Content of Engine Coolants
    ASTM D 3634 : 2021 Standard Test Method for Trace Chloride Ion in Engine Coolants
    ASTM D 1121 : 2011 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
    ASTM D 93 : 2016-07 TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER
    ASTM D 1287 : 1991 : R2002 Standard Test Method for pH of Engine Coolants and Antirusts
    ASTM D 1121 : 1998 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
    ASTM D 2983 : 2021 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
    ASTM D 2983 : 2015 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
    ASTM D 2983 : 2009 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
    ASTM D 5827 : 1995 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
    ASTM D 2983 : 2022 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
    ASTM D 93 : 2000 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
    ASTM D 4725 : 2004 Standard Terminology for Engine Coolants
    ASTM D 2983 : 2019 : EDT 1 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
    ASTM D 7934/D7934M : 2014 Standard Test Method for Corrosion of Cast Aluminum Alloys in Non-Aqueous Engine Coolants Under Heat-Rejecting Conditions (Withdrawn 2023)
    ASTM D 3634 : 1999 : R2015 Standard Test Method for Trace Chloride Ion in Engine Coolants
    ASTM D 93 : 1985 Standard Test Method for Flash Point by Pensky-Martens Closed Tester
    ASTM D 2983 : 2001 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
    ASTM D 1120 : 2017 Standard Test Method for Boiling Point of Engine Coolants
    ASTM D 4725 : 2008 Standard Terminology for Engine Coolants
    ASTM D 2983 : 2004 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
    ASTM D 2983 : 2003 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
    ASTM D 5931 : 1996 : R2007 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
    ASTM D 5827 : 2009 : R2015 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
    ASTM D 1120 : 2016 Standard Test Method for Boiling Point of Engine Coolants
    ASTM D 2983 : 1987 : R1993 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
    ASTM D 1122 : 1997 : REV A : R2002 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
    ASTM D 2983 : 2023 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
    ASTM D 4725 : 2008 : REV A Standard Terminology for Engine Coolants
    ASTM D 1120 : 2011 : EDT 1 Standard Test Method for Boiling Point of Engine Coolants
    ASTM D 5931 : 2013 : R2017 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
    ASTM D 5827 : 2009 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
    ASTM D 93 : 1997 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
    ASTM D 4725 : 2015 : R2023 Standard Terminology for Engine Coolants and Related Fluids
    ASTM D 3634 : 1999 : EDT 1 Standard Test Method for Trace Chloride Ion in Engine Coolants
    ASTM D 1120 : 2022 Standard Test Method for Boiling Point of Engine Coolants
    ASTM D 4725 : 2013 Standard Terminology for Engine Coolants and Related Fluids
    ASTM D 5931 : 2013 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
    ASTM D 93 : 2018 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
    ASTM D 2983 : 2016 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
    ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
    ASTM D 5931 : 2020 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective