ASTM D 8149 : 2017

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants

Available format(s): Hardcopy, PDF

Superseded date: 15-10-2020

Language(s): English

Published date: 01-12-2017

Publisher: American Society for Testing and Materials

Abstract - (Show below) - (Hide below)

CONTAINED IN VOL. 05.05, 2018 Defines the information on calibration, quality control, and operational guidance for anionic measurements using ion chromatography (IC).

Scope - (Show below) - (Hide below)

1.1This practice covers the information on calibration, quality control, and operational guidance for anionic measurements using ion chromatography (IC).

1.2IC Related Standards—Chemically or electrolytically regenerated suppressed ion chromatography standards for aqueous matrices include Test Methods D2988, D4327, D5085, D5542, D5827, D5987, D5996, D6581, D7319, D7328, D7359, D7773, D7994, and D8150; IC instrumentation requirements are described in Practices E1151, and E1511.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Product Information - (Show below) - (Hide below)

Committee	D 02
Document Type	Standard Practice
ISBN
Pages
Published
Publisher	American Society for Testing and Materials
Status	Superseded
Superseded By	ASTM D 8149 : 2020

Standards Referencing This Book - (Show below) - (Hide below)

ASTM D 4057 : 2019	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 7359 : 2013	Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM D 4057 : 1995	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 7591 : 2012 : R2017	Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
ASTM D 2988 : 1996 : R2010	Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
ASTM D 6299 : 2010	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM E 1151 : 1993 : R2019	Standard Practice for Ion Chromatography Terms and Relationships
ASTM D 6581 : 2012	Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography
ASTM D 6299 : 2013 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 5996 : 2005 : R2009	Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM D 6581 : 2000 : R2005	Standard Test Method for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Chemically Suppressed Ion Chromatography
ASTM D 4177 : 2016 : EDT 1	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 6299 : 2017 : REV A	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 2988 : 1996	Standard Test Methods for Water-Soluble Halide Ion In Halogenated Organic Solvents and Their Admixtures
ASTM D 6299 : 2017 : REV B	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 5542 : 2004 : R2009	Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D 6299 : 2009	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM E 1151 : 1993	Standard Practice for Ion Chromatography Terms and Relationships
ASTM D 4177 : 1995	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 5085 : 2002	Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
ASTM D 6751 : 2006 : REV A	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7319 : 2011 : EDT 1	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 7318 : 2019 : EDT 1	Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 4057 : 2012 : R2018	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 6751 : 2007 : REV B	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6751 : 2006 : EDT 1	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6299 : 2013	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6792 : 2006	Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 5996 : 1996 : R2000	Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM D 7328 : 2017 : REDLINE	Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 6792 : 2017 : REDLINE	Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
ASTM D 6751 : 2018	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6751 : 2009 : REV A	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6792 : 2004	Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 6751 : 2007 : REV B : EDT 1	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1193 : 1977 : R1983 : EDT 1	Standard Specification for Reagent Water
ASTM D 7318 : 2011	Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 5987 : 1996 : R2007	Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
ASTM D 5085 : 2002 : R2008	Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
ASTM D 6299 : 2010 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7994 : 2017	Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM D 7318 : 2007	Standard Test Method for Total Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 2988 : 1996 : R2015	Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
ASTM D 6751 : 2007	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM E 1511 : 1993 : R2000	Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography
ASTM D 4057 : 1981 : EDT 2	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 6751 : 2012	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 5085 : 2002 : R2013	Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
ASTM D 2988 : 1996 : R2000	Standard Test Methods for Water-Soluble Halide Ion In Halogenated Organic Solvents and Their Admixtures
ASTM D 6751 : 2014	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 5996 : 2016	Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM D 6792 : 2004 : REV A	Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 7591 : 2012	Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
ASTM D 7318 : 2013	Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM E 1511 : 1993 : R2005	Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography
ASTM D 7328 : 2013	Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM E 1511 : 1993 : R2017	Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography
ASTM D 4327 : 2011	Standard Test Method for Anions in Water by Suppressed Ion Chromatography
ASTM D 6792 : 2005	Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 5987 : 1996	Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
ASTM D 5827 : 2009 : EDT 1	Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 6299 : 2000	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2010 : EDT 2	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6751 : 2011 : REV B	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 86 : 2017-06	TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE
ASTM D 6299 : 2016	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7319 : 2007	Standard Test Method for Determination of Total and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 6751 : 2015 : REV B	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 4057 : 2006	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 6581 : 2000	Standard Test Method for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Chemically Suppressed Ion Chromatography
ASTM D 1193 : 2006 : R2011	Standard Specification for Reagent Water
ASTM D 4177 : 2015	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 6751 : 2015 : REV C	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6299 : 2019	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7359 : 2008	Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM E 1511 : 1993	Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography
ASTM D 7319 : 2017 : REDLINE	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
ASTM D 6751 : 2015 : REV A	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7773 : 2012	Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3 ) Using Filter Sampling and Suppressed Ion Chromatography
ASTM D 4057 : 2012	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 6299 : 2000 : REV A	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 5542 : 2016	Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM E 1151 : 1993 : R2000	Standard Practice for Ion Chromatography Terms and Relationships
ASTM D 6792 : 2013	Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 7359 : 2014	Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM D 6581 : 2018	Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography
ASTM D 6792 : 2017	Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
ASTM D 4327 : 2003	Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
ASTM D 7319 : 2017	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
ASTM D 2988 : 1996 : R2020	Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
ASTM D 6751 : 2002	Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 6751 : 2003 : REV A	Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 7319 : 2009	Standard Test Method for Determination of Total and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 7328 : 2016	Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 7318 : 2019	Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 6792 : 2007	Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 1193 : 1991	Standard Specification for Reagent Water
ASTM D 6751 : 2020	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6299 : 2020	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4177 : 1995 : R2010	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 7359 : 2018	Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM D 6299 : 2008	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6751 : 2003	Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 6751 : 2008	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6751 : 2019	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 4177 : 1995 : R2000	Standard Practice for Automatic Sampling of Peroleum and Petroleum Products
ASTM E 1511 : 1993 : R2010	Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography
ASTM E 1151 : 1993 : R2006	Standard Practice for Ion Chromatography Terms and Relationships
ASTM D 5996 : 2016 : REDLINE	Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM D 6299 : 2002 : EDT 1	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4327 : 2017	Standard Test Method for Anions in Water by Suppressed Ion Chromatography
ASTM D 7319 : 2011	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 7319 : 2012	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 5542 : 1994 : R1999 : EDT 1	Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D 4327 : 1997	Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
ASTM D 6581 : 2008	Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography
ASTM D 5542 : 2016 : REDLINE	Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D 5542 : 2004	Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D 5827 : 1995	Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 6751 : 2015 : REV C : EDT 1	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 5085 : 1995	Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
ASTM D 2988 : 1996 : R2005	Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
ASTM D 6751 : 2007 : REV A	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7328 : 2007	Standard Test Method for Determination of Total and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 5987 : 1996 : R2002	Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
ASTM D 6751 : 2011	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7328 : 2011	Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 7328 : 2017	Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 4177 : 2016	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 1193 : 1970	Standard Specification For Reagent Water
ASTM D 6792 : 2003	Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 4177 : 1995 : R2005	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 1193 : 2006	Standard Specification for Reagent Water
ASTM D 7318 : 2018	Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 5827 : 2009 : R2015	Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 6751 : 2011 : REV A	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6751 : 2015	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 5996 : 2005	Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM E 1151 : 1993 : R2011	Standard Practice for Ion Chromatography Terms and Relationships
ASTM D 8150 : 2017	Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
ASTM D 1193 : 1999	Standard Specification for Reagent Water
ASTM D 6792 : 2002	Standard Guide for A Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 7773 : 2019	Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3) Using Filter Sampling and Suppressed Ion Chromatography
ASTM D 6299 : 2007	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2007 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4057 : 1995 : R2000	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 5827 : 2009	Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 6299 : 2017	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6751 : 2009	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1193 : 2006 : R2018	Standard Specification for Reagent Water
ASTM D 7359 : 2014 : REV A	Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM D 4177 : 2015 : REV A	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4057 : 2006 : R2011	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 5987 : 1996 : R2015	Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods (Withdrawn 2020)
ASTM D 7328 : 2007 : EDT 1	Standard Test Method for Determination of Total and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 6751 : 2010	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7319 : 2013	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
ASTM D 6751 : 2002 : REV A	Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 6299 : 2002	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account

Committee	D 02
Document Type	Standard Practice
ISBN
Pages
Published
Publisher	American Society for Testing and Materials
Status	Superseded
Superseded By	ASTM D 8149 : 2020

Standards Referencing This Book - (Show below) - (Hide below)

ASTM D 4057 : 2019	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 7359 : 2013	Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM D 4057 : 1995	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 7591 : 2012 : R2017	Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
ASTM D 2988 : 1996 : R2010	Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
ASTM D 6299 : 2010	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM E 1151 : 1993 : R2019	Standard Practice for Ion Chromatography Terms and Relationships
ASTM D 6581 : 2012	Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography
ASTM D 6299 : 2013 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 5996 : 2005 : R2009	Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM D 6581 : 2000 : R2005	Standard Test Method for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Chemically Suppressed Ion Chromatography
ASTM D 4177 : 2016 : EDT 1	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 6299 : 2017 : REV A	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 2988 : 1996	Standard Test Methods for Water-Soluble Halide Ion In Halogenated Organic Solvents and Their Admixtures
ASTM D 6299 : 2017 : REV B	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 5542 : 2004 : R2009	Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D 6299 : 2009	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM E 1151 : 1993	Standard Practice for Ion Chromatography Terms and Relationships
ASTM D 4177 : 1995	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 5085 : 2002	Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
ASTM D 6751 : 2006 : REV A	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7319 : 2011 : EDT 1	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 7318 : 2019 : EDT 1	Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 4057 : 2012 : R2018	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 6751 : 2007 : REV B	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6751 : 2006 : EDT 1	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6299 : 2013	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6792 : 2006	Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 5996 : 1996 : R2000	Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM D 7328 : 2017 : REDLINE	Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 6792 : 2017 : REDLINE	Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
ASTM D 6751 : 2018	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6751 : 2009 : REV A	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6792 : 2004	Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 6751 : 2007 : REV B : EDT 1	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1193 : 1977 : R1983 : EDT 1	Standard Specification for Reagent Water
ASTM D 7318 : 2011	Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 5987 : 1996 : R2007	Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
ASTM D 5085 : 2002 : R2008	Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
ASTM D 6299 : 2010 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7994 : 2017	Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM D 7318 : 2007	Standard Test Method for Total Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 2988 : 1996 : R2015	Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
ASTM D 6751 : 2007	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM E 1511 : 1993 : R2000	Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography
ASTM D 4057 : 1981 : EDT 2	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 6751 : 2012	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 5085 : 2002 : R2013	Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
ASTM D 2988 : 1996 : R2000	Standard Test Methods for Water-Soluble Halide Ion In Halogenated Organic Solvents and Their Admixtures
ASTM D 6751 : 2014	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 5996 : 2016	Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM D 6792 : 2004 : REV A	Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 7591 : 2012	Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
ASTM D 7318 : 2013	Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM E 1511 : 1993 : R2005	Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography
ASTM D 7328 : 2013	Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM E 1511 : 1993 : R2017	Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography
ASTM D 4327 : 2011	Standard Test Method for Anions in Water by Suppressed Ion Chromatography
ASTM D 6792 : 2005	Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 5987 : 1996	Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
ASTM D 5827 : 2009 : EDT 1	Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 6299 : 2000	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2010 : EDT 2	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6751 : 2011 : REV B	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 86 : 2017-06	TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE
ASTM D 6299 : 2016	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7319 : 2007	Standard Test Method for Determination of Total and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 6751 : 2015 : REV B	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 4057 : 2006	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 6581 : 2000	Standard Test Method for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Chemically Suppressed Ion Chromatography
ASTM D 1193 : 2006 : R2011	Standard Specification for Reagent Water
ASTM D 4177 : 2015	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 6751 : 2015 : REV C	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6299 : 2019	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7359 : 2008	Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM E 1511 : 1993	Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography
ASTM D 7319 : 2017 : REDLINE	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
ASTM D 6751 : 2015 : REV A	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7773 : 2012	Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3 ) Using Filter Sampling and Suppressed Ion Chromatography
ASTM D 4057 : 2012	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 6299 : 2000 : REV A	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 5542 : 2016	Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM E 1151 : 1993 : R2000	Standard Practice for Ion Chromatography Terms and Relationships
ASTM D 6792 : 2013	Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 7359 : 2014	Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM D 6581 : 2018	Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography
ASTM D 6792 : 2017	Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
ASTM D 4327 : 2003	Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
ASTM D 7319 : 2017	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
ASTM D 2988 : 1996 : R2020	Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
ASTM D 6751 : 2002	Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 6751 : 2003 : REV A	Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 7319 : 2009	Standard Test Method for Determination of Total and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 7328 : 2016	Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 7318 : 2019	Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 6792 : 2007	Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 1193 : 1991	Standard Specification for Reagent Water
ASTM D 6751 : 2020	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6299 : 2020	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4177 : 1995 : R2010	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 7359 : 2018	Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM D 6299 : 2008	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6751 : 2003	Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 6751 : 2008	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6751 : 2019	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 4177 : 1995 : R2000	Standard Practice for Automatic Sampling of Peroleum and Petroleum Products
ASTM E 1511 : 1993 : R2010	Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography
ASTM E 1151 : 1993 : R2006	Standard Practice for Ion Chromatography Terms and Relationships
ASTM D 5996 : 2016 : REDLINE	Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM D 6299 : 2002 : EDT 1	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4327 : 2017	Standard Test Method for Anions in Water by Suppressed Ion Chromatography
ASTM D 7319 : 2011	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 7319 : 2012	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 5542 : 1994 : R1999 : EDT 1	Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D 4327 : 1997	Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
ASTM D 6581 : 2008	Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography
ASTM D 5542 : 2016 : REDLINE	Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D 5542 : 2004	Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D 5827 : 1995	Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 6751 : 2015 : REV C : EDT 1	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 5085 : 1995	Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
ASTM D 2988 : 1996 : R2005	Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
ASTM D 6751 : 2007 : REV A	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7328 : 2007	Standard Test Method for Determination of Total and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 5987 : 1996 : R2002	Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
ASTM D 6751 : 2011	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7328 : 2011	Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 7328 : 2017	Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 4177 : 2016	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 1193 : 1970	Standard Specification For Reagent Water
ASTM D 6792 : 2003	Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 4177 : 1995 : R2005	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 1193 : 2006	Standard Specification for Reagent Water
ASTM D 7318 : 2018	Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 5827 : 2009 : R2015	Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 6751 : 2011 : REV A	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6751 : 2015	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 5996 : 2005	Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM E 1151 : 1993 : R2011	Standard Practice for Ion Chromatography Terms and Relationships
ASTM D 8150 : 2017	Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
ASTM D 1193 : 1999	Standard Specification for Reagent Water
ASTM D 6792 : 2002	Standard Guide for A Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 7773 : 2019	Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3) Using Filter Sampling and Suppressed Ion Chromatography
ASTM D 6299 : 2007	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2007 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4057 : 1995 : R2000	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 5827 : 2009	Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 6299 : 2017	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6751 : 2009	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1193 : 2006 : R2018	Standard Specification for Reagent Water
ASTM D 7359 : 2014 : REV A	Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM D 4177 : 2015 : REV A	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4057 : 2006 : R2011	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 5987 : 1996 : R2015	Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods (Withdrawn 2020)
ASTM D 7328 : 2007 : EDT 1	Standard Test Method for Determination of Total and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 6751 : 2010	Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7319 : 2013	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
ASTM D 6751 : 2002 : REV A	Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 6299 : 2002	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

View more information

ASTM D 8149 : 2017

Add To Cart

Access your standards online with a subscription