ASTM D 979/D979M : 2022
Current
The latest, up-to-date edition.
Standard Practice for Sampling Asphalt Mixtures
Hardcopy , PDF
English
07-11-2022
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 04
|
| DocumentType |
Standard Practice
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This practice covers sampling of asphalt mixtures at points of manufacture, storage, delivery, or in place.
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 7063/D7063M : 2018 | Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples |
| ASTM D 6857/D6857M : 2018 | Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method |
| ASTM D 2172/D2172M : 2017 : EDT 1 | Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures |
| ASTM D 7196 : 2018 | Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples |
| ASTM D 2041/D2041M : 2019 | Standard Test Method for Theoretical Maximum Specific Gravity and Density of Asphalt Mixtures |
| ASTM D 3625/D3625M : 2020 | Standard Practice for Effect of Water on Asphalt-Coated Aggregate Using Boiling Water |
| ASTM D 7870/D7870M : 2020 | Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure |
| ASTM D 6307 : 2019 | Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method |
| ASTM D 4125/D4125M : 2021 | Standard Test Methods for Asphalt Content of Asphalt Mixtures by the Nuclear Method |
| ASTM D 2726/D2726M : 2021 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures |
| ASTM D 4215 : 2021 | Standard Specification for Cold-Mixed, Cold-Laid Asphalt Paving Mixtures |
| ASTM D 8237 : 2021 | Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures with the Four-Point Beam Fatigue Device |
| ASTM D 1188/D1188M : 2022 | Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Coated Samples |
| ASTM D 8360 : 2022 | Standard Test Method for Determination of Rutting Tolerance Index of Asphalt Mixture Using the Ideal Rutting Test |
| ASTM D 1461 : 2017 : R2022 | Standard Test Method for Moisture or Volatile Distillates in Asphalt Mixtures |
| ASTM D 6925 : 2015 | Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor |
| ASTM D 8044 : 2016 | Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures |
| ASTM D 8079 : 2016 | Standard Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor |
| ASTM D 6925 : 2023 | Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor |
| ASTM D 8303 : 2020 | Standard Test Method for Determining Thermal Cracking Properties of Asphalt Mixtures Through Measurement of Thermally Induced Stress and Strain |
| ASTM D 4867/D4867M : 2022 | Standard Test Method for Effect of Moisture on Asphalt Mixtures |
| ASTM D 7196 : 2023 | Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples |
| ASTM D 8044 : 2023 | Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance Using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures |
| ASTM D 6627/D6627M : 2022 | Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures |
| ASTM D 6390 : 2023 | Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures |
| ASTM D 8458 : 2022 | Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test |
| ASTM D 6857/D6857M : 2023 | Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method |
| ASTM D 8541 : 2023 | Standard Test Method for Determination of Relative Rotation to Evaluate the Workability of Asphalt Mixture Using Wireless Particle-Size Sensors |
| ASTM D 5444 : 2023 | Standard Test Method for Mechanical Size Analysis of Extracted Aggregate |
| ASTM D 5444 : 2024 | Standard Test Method for Mechanical Size Analysis of Extracted Aggregate |
| ASTM D 6925 : 2023 | Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor |
| ASTM D 3665 : 2012 : R2017 | Standard Practice for Random Sampling of Construction Materials |
| ASTM D 5361/D5361M : 2016 | Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing |
| ASTM D 2041/D2041M : 2011 | Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures |
| ASTM D 5444 : 2015 | Standard Test Method for Mechanical Size Analysis of Extracted Aggregate |
| ASTM D 3665 : 2024 | Standard Practice for Random Sampling of Construction Materials |
| ASTM D 5361/D5361M : 2016 : R2022 | Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing |
| ASTM D 2726/D2726M : 2014 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures |
| ASTM E 141 : 2010 : R2023 | Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling |
| ASTM D 2726/D2726M : 2019 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures |
| ASTM E 141 : 2010 : R2018 | Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.