ASTM E 1078 : 2014 : REDLINE
Current
The latest, up-to-date edition.
Standard Guide for Specimen Preparation and Mounting in Surface Analysis
English
01-10-2014
CONTAINED IN VOL. 03.06, 2014 Defines specimen preparation and mounting prior to, during, and following surface analysis and applies to the following surface analysis.
Committee |
E 42
|
DocumentType |
Redline
|
Pages |
11
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
1.1This guide covers specimen preparation and mounting prior to, during, and following surface analysis and applies to the following surface analysis disciplines:
1.1.1Auger electron spectroscopy (AES),
1.1.2X-ray photoelectron spectroscopy (XPS and ESCA), and
1.1.3Secondary ion mass spectrometry (SIMS).
1.1.4Although primarily written for AES, XPS, and SIMS, these methods will also apply to many surface sensitive analysis methods, such as ion scattering spectrometry, low energy electron diffraction, and electron energy loss spectroscopy, where specimen handling can influence surface sensitive measurements.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ISO 19318:2004 | Surface chemical analysis X-ray photoelectron spectroscopy Reporting of methods used for charge control and charge correction |
BS ISO 19318:2004 | Surface chemical analysis. X-ray photoelectron spectroscopy. Reporting of methods used for charge control and charge correction |
ASTM E 2695 : 2009 | Standard Guide for Interpretation of Mass Spectral Data Acquired with Time-of-Flight Secondary Ion Mass Spectroscopy (Withdrawn 2018) |
ASTM E 1523 : 2015 : REDLINE | Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy (Withdrawn 2024) |
ASTM E 1127 : 2008 : R2015 | Standard Guide for Depth Profiling in Auger Electron Spectroscopy (Withdrawn 2024) |
09/30184131 DC : 0 | BS ISO 29081 - SURFACE CHEMICAL ANALYSIS - AUGER ELECTRON SPECTROSCOPY - REPORTING OF METHODS USED FOR CHARGE CONTROL AND CHARGE CORRECTION |
ASTM F 2150 : 2013 : REDLINE | Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products |
ASTM E 2735 : 2014 : REDLINE | Standard Guide for Selection of Calibrations Needed for X-ray Photoelectron Spectroscopy (XPS) Experiments |
ASTM E 902 : 2005 | Standard Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers (Withdrawn 2011) |
PD ISO/TR 14187:2011 | Surface chemical analysis. Characterization of nanostructured materials |
BS ISO 29081:2010 | Surface chemical analysis. Auger electron spectroscopy. Reporting of methods used for charge control and charge correction |
ASTM F 2883 : 2011 | Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications (Withdrawn 2020) |
ASTM E 1127 : 2008 | Standard Guide for Depth Profiling in Auger Electron Spectroscopy |
03/301547 DC : DRAFT JAN 2003 | ISO 19318 - SURFACE CHEMICAL ANALYSIS - X-RAY PHOTOELECTRON SPECTROSCOPY - REPORTING OF METHODS USED FOR CHARGE CONTROL AND CHARGE CORRECTION |
ASTM E 2108 : 2016 : REDLINE | Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer |
ASTM E 1829 : 2014 : REDLINE | Standard Guide for Handling Specimens Prior to Surface Analysis |
ISO 29081:2010 | Surface chemical analysis Auger electron spectroscopy Reporting of methods used for charge control and charge correction |
ASTM F 2847 : 2017 : REDLINE | Standard Practice for Reporting and Assessment of Residues on Single-Use Implants and Single-Use Sterile Instruments |
ISO/TR 14187:2011 | Surface chemical analysis Characterization of nanostructured materials |
ISO 18115-1:2013 | Surface chemical analysis — Vocabulary — Part 1: General terms and terms used in spectroscopy |
ASTM E 1523 : 2015 : REDLINE | Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy (Withdrawn 2024) |
ASTM E 1829 : 2014 : REDLINE | Standard Guide for Handling Specimens Prior to Surface Analysis |
ISO 18115-2:2013 | Surface chemical analysis Vocabulary Part 2: Terms used in scanning-probe microscopy |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.