ASTM E 1266 : 2020
Current
Current
The latest, up-to-date edition.
Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-05-2020
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 34
|
| DocumentType |
Standard Practice
|
| Pages |
4
|
| ProductNote |
THIS STANDARD IS ALSO REFERES TO EPA/530-R-93-007, EPA/530-SW-86-016,EPA/540-2-86, EPA/600/R-09-148, EPA SW 846, EPA SW 872, 40 CFR 264 , 40 CFR 268
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This practice provides descriptions and references of existing test methods and commercial practices relating to the processing of lime, fly ash, and heavy metal wastes in construction applications.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 821 : 2022 | Standard Specification for Lime for Use with Pozzolans |
| ASTM C 25 : 2024 | Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime |
| ASTM D 2434 : 2022 | Standard Test Methods for Measurement of Hydraulic Conductivity of Coarse-Grained Soils |
| ASTM C 977 : 2003 : R2009 | Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization |
| ASTM C 109/C109M : 2020 : REV B | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) |
| ASTM C 110 : 2020 | Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone |
| ASTM C 311/C311M : 2018 | Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete |
| ASTM C 5 : 2018 | Standard Specification for Quicklime for Structural Purposes |
| ASTM C 109/C109M : 2021 | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) |
| ASTM C 400 : 2019 : R2024 : EDT 1 | Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid |
| ASTM C 400 : 2019 : R2024 : EDT 2 | Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid |
| ASTM C 5 : 2024 | Standard Specification for Quicklime for Structural Purposes |
| ASTM C 311/C311M : 2022 | Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete |
| ASTM C 618 : 2023 : EDT 1 | Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
| ASTM C 821 : 2014 | Standard Specification for Lime for Use with Pozzolans |
| ASTM C 207 : 2018 | Standard Specification for Hydrated Lime for Masonry Purposes |
| ASTM C 311/C311M : 2024 | Standard Test Methods for Sampling and Testing Coal Ash or Natural Pozzolans for Use in Concrete |
| ASTM C 109/C109M : 2020 : REV A | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) |
| ASTM C 977 : 2018 : R2024 | Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization |
| ASTM C 109/C109M : 2023 | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50mm [2 in.] Cube Specimens) |
| ASTM D 1557 : 2012 : R2021 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 1557 : 2012 : EDT 1 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 2434 : 2019 | Standard Test Method for Permeability of Granular Soils (Constant Head) |
| ASTM C 618 : 2022 | Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
| ASTM C 400 : 2019 | Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid |
| ASTM D 559/D559M : 2015 | Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures |
| ASTM D 559/D559M : 2015 : R2023 | Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures |
| ASTM C 206 : 2014 | Standard Specification for Finishing Hydrated Lime |
| ASTM D 560/D560M : 2024 | Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures |
| ASTM C 110 : 2024 | Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone |
| ASTM C 618 : 2023 | Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
| ASTM D 3877 : 1996 | Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures |
| ASTM C 25 : 2019 : EDT 1 | Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime |
| ASTM C 207 : 2024 | Standard Specification for Hydrated Lime for Masonry Purposes |
| ASTM C 109/C109M : 2016 : REV A | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) |
| ASTM C 206 : 2014 : R2022 | Standard Specification for Finishing Hydrated Lime |
| ASTM D 2435/D2435M : 2011 : R2020 | Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading |
| ASTM C 618 : 2019 | Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
| ASTM D 5681 : 2022 | Standard Terminology for Waste and Waste Management |
| ASTM C 110 : 2000 | Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone |
| ASTM D 1557 : 2009 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 560/D560M : 2016 | Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures |
| ASTM D 5681 : 2022 : EDT 1 | Standard Terminology for Waste and Waste Management |
| ASTM D 5681 : 2023 | Standard Terminology for Waste and Waste Management |
| ASTM D 559/D559M : 2015 : R2023 : EDT 1 | Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures |
| ASTM C 977 : 2018 | Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization |
| ASTM C 911 : 2019 | Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses |
| ASTM C 25 : 2019 | Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.