ASTM E 1272 : 2002 : R2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Laboratory Glass Graduated Cylinders
Hardcopy , PDF
20-11-2024
English
01-11-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 14.04, 2015 Defines requirements for glass graduated cylinders for precision and general purpose grades suitable for laboratory purposes.
| Committee |
E 41
|
| DocumentType |
Standard
|
| Pages |
2
|
| ProductNote |
Reconfirmed 2012
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers requirements for glass graduated cylinders for precision and general purpose grades suitable for laboratory purposes.
1.1.1Class A—Each cylinder of precision grade shall be marked with the letter “A” to signify compliance with applicable construction and accuracy requirements. Cylinders may be marked with an identification number (serial number) at the option of the manufacturer.
1.1.2Class B—General purpose cylinders are of the same basic design as Class A cylinders. However, volumetric tolerances for Class B cylinders shall be within twice the specified range allowed for Class A cylinders. These cylinders need not be marked with their class designation.
1.1.3Product with a stated capacity not listed in this standard may be specified in class A tolerance when product conforms to the tolerance range of the next smaller volumetric standard product listed in Table 1.
| Capacity, mL | Main | Graduations, Intermediate | LeastA | Distance From Scale to Top, mm | Minimum | Maximum | Standard Taper () Stopper NumberB | Tolerances to Contain or to Deliver ± mL | ||
| max | minC | Class A | Class B | |||||||
| 5 | 1.0 | 0.5 | 0.1 | 50 | 20 | 0.9 | 11.2 | 9 | 0.05 | 0.10 |
| 10 | 1.0 | 0.5 | 0.1 | 60 | 20 | 1.0 | 15.2 | 9 | 0.10 | 0.20 |
| 10 | 1.0 | ... | 0.2 | 60 | 20 | 1.0 | 15.2 | 13 | 0.10 | 0.20 |
| 25 | 2.0 | 1.0 | 0.2 | 80 | 20 | 1.1 | 18.5 | 13 | 0.17 | 0.34 |
| 25 | 5.0 | 1.0 | 0.5 | 60 | 20 | 1.1 | 19.3 | 13 | 0.17 | 0.34 |
| 50D | 5.0 or 10.0 | 5.0 | 1.0 | 80 | 20 | 1.2 | 23 | 16 | 0.25 | 0.50 |
| 100 | 10.0 | 5.0 | 1.0 | 80 | 20 | 1.3 | 29.6 | 16 or 22 | 0.50 | 1.00 |
| 250 | 20.0 | 10.0 | 2.0 | 100 | 30 | 1.5 | 42.4 | 22 or 27 | 1.00 | 2.00 |
| 500 | 50.0 | 25.0 | 5.0 | 100 | 35 | 1.6 | 50.8 | 27 or 32 | 2.00 | 4.00 |
| 1000 | 100.0 | 50.0 | 10.0 | 110 | 45 | 2.0 | 63 | 32 | 3.00 | 6.00 |
| 2000 | 200.0 | 100.0 | 20.0 | 125 | 50 | 2.0 | 82.1 | 38 | 6.00 | 12.00 |
| 4000 | 500.0 | 250.0 | 50.0 | 130 | 50 | 2.2 | 110 | ... | 14.50 | 29.00 |
| ASTM E 694 : 2018 | Standard Specification for Laboratory Glass Volumetric Apparatus |
| ASTM D 7563 : 2010 : R2016 | Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel |
| ASTM C 1770 : 2013 | Standard Test Method for Determination of Loose and Tapped Bulk Density of Plutonium Oxide |
| ASTM C 940 : 2016 | Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory |
| ASTM E 133 : 1992 : R2016 | Standard Specification for Distillation Equipment |
| ASTM D 86 : 2018 | Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure |
| ASTM D 7569/D7569M : 2010 : R2015 : EDT 1 | Standard Practice for Determination of Gas Content of Coal—Direct Desorption Method |
| ASTM D 7603 : 2013 | Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils (Withdrawn 2022) |
| ASTM D 6082 : 2012 : R2017 | Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils |
| ASTM E 675 : 2002 | Standard Specification for Interchangeable Taper-Ground Stopcocks And Stoppers |
| ASTM E 438 : 1992 | SPECIFICATION FOR GLASSES IN LABORATORY APPARATUS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.