ASTM E 128 : 1999
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
Hardcopy , PDF
11-11-2014
English
10-05-1999
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 14.04, 2015 Describes the maximum pore diameter and permeability of rigid porous filters used in the laboratory for filtration or diffusion.
| Committee |
E 41
|
| DocumentType |
Test Method
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This test method covers the determination of maximum pore diameter and permeability of rigid porous filters used in the laboratory for filtration or diffusion. They are applicable to filters made of sintered glass, ceramic, metal, or plastic. This test method establishes a uniform designation for maximum pore diameter and also provides a means of detecting and measuring changes which occur through continued use.
1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 6811 : 2002 : R2007 : EDT 1 | Standard Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method) <a href="#fn00002"></a> (Withdrawn 2013) |
| ASTM D 721 : 2017 : REDLINE | Standard Test Method for Oil Content of Petroleum Waxes |
| ASTM F 316 : 2003 : R2011 | Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test |
| ASTM D 7840 : 2012 : R2017 | Standard Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware |
| ASTM F 316:2003 | Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test |
| ASTM F 2150 : 2013 : REDLINE | Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products |
| EI 1550 : 2014 | HANDBOOK ON EQUIPMENT USED FOR THE MAINTENANCE AND DELIVERY OF CLEAN AVIATION FUEL |
| ASTM D 6811 : 2002 | Standard Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method)<sup>1, 2</sup> |
| ASTM D 1607 : 1991 : R2011 | Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction) |
| ASTM D 6908 : 2006 : R2010 | Standard Practice for Integrity Testing of Water Filtration Membrane Systems |
| ASTM D 1881 : 2017 : REDLINE | Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| ASTM D 1607 : 1991 : R2000 : EDT 1 | Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction) |
| ASTM D 6811 : 2002 : R2007 | Standard Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method) <a href="#fn00002"></a> |
| ASTM D 1607 : 1991 : R2005 | Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction) |
| ASTM D 3608 : 1995 : R2011 | Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction |
| ASTM D 6908 : 2006 | Standard Practice for Integrity Testing of Water Filtration Membrane Systems |
| ASTM D 3608 : 1995 : R2005 | Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction |
| ASTM F 2883 : 2011 | Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications (Withdrawn 2020) |
| ASTM D 6082 : 2012 : R2017 | Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils |
| DD-F-776 Revision C:1960 | FUNNEL, FILTERING, LABORATORY, GLASS, BUCHNER TYPE |
| ASTM D 3608 : 1995 : R2000 : EDT 1 | Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction |
| ASTM D 6082 : 2012 | Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils |
| MIL-C-3659 Revision A:1968 | CRUCIBLE, FILTERING, LABORATORY, GOOCH, LOW FORM, FRITTED 30 M1 |
| ASTM D 7840 : 2012 | Standard Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware |
| ASTM D 6908 : 2006 : R2017 | Standard Practice for Integrity Testing of Water Filtration Membrane Systems |
| ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
| ASTM D 845 : 1977 | Specification for Five-Degree Xylene (Withdrawn 1980) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.