ASTM E 1548 : 2009 : R2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Preparation of Aerospace Contamination Control Plans
Hardcopy , PDF
03-12-2023
English
05-10-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 15.03, 2017 Helps in the preparation of formal plans for contamination control, especially of aerospace critical surfaces.
| Committee |
E 21
|
| DocumentType |
Standard Practice
|
| Pages |
5
|
| ProductNote |
Reconfirmed 2017
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice is intended to assist in the preparation of formal plans for contamination control, especially of aerospace critical surfaces. Requirements may be established at the systems level, either by the customer or the systems integrator, or at the subsystem level. Subsystem requirements may be imposed by the responsible subsystem supplier or they may be flowed down from the systems organization (4.7). The extent of detail and level of cleanliness required can vary with the particular application and type of hardware being built, but all aspects of contamination control must be included in a final plan. Therefore, each of the following elements must be considered for inclusion in a contamination control plan (CCP):
1.1.1Cleanliness requirements for deliverable hardware addressing particulate, molecular, or biological contaminants or combination thereof. Specify contamination limits and any budget allocations.
1.1.2Implementation plans to achieve, verify, and maintain the specified cleanliness requirements. Specify material and process controls, cleaning techniques, verification tests, protection and prevention plans, transportation controls, and corrective action for discrepancies.
1.1.3Environmental controls including clean facilities to be used, facility maintenance, and monitoring schedule.
1.1.4Personnel and operational controlsincluding operating procedures, restrictions, training, motivation, and organizational responsibilities including the organization or individual for implementation and verification of the CCP.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 2217 : 2012 | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| ASTM E 1235 : 1995 : EDT 1 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM E 1559 : 2009 : R2022 | Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials |
| ASTM E 2217 : 2002 | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| ASTM E 2217 : 2012 : REDLINE | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| ASTM E 1549 : 1995 : R2000 : EDT 1 | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
| ASTM E 595 : 2015 | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| ASTM E 1559 : 2009 : R2016 | Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials |
| ISO 14644-2:2015 | Cleanrooms and associated controlled environments Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration |
| ASTM E 1235 : 2012 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM E 1216 : 1999 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ASTM E 595 : 2015 : REDLINE | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| ASTM E 1549 : 2006 | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
| ASTM E 2042 : 1999 | Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms |
| FED-STD-209 Revision E:1992 | AIRBORNE PARTICULATE CLEANLINESS CLASSES IN CLEANROOMS AND CLEAN ZONES |
| MIL-STD-1246 Revision C:1994 | PRODUCT CLEANLINESS LEVELS AND CONTAMINATION CONTROL PROGRAM |
| ASTM E 1216 : 2021 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ASTM E 1235 : 2001 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM E 595 : 2015 : R2021 | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| ASTM E 1235 : 2012 : R2020 : EDT 1 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM E 2217 : 2002 : R2007 | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| ASTM E 1559 : 2000 | Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials |
| ASTM E 1235 : 2012 : REDLINE | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM E 1216 : 2011 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ASTM E 1235 : 2012 : R2020 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM E 1216 : 2006 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ASTM E 1216 : 2011 : R2016 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ISO 14644-1:2015 | Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration |
| ASTM F 50 : 2012 : R2015 | Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles |
| ASTM E 1235 : 2008 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM E 2217 : 2012 : R2019 | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| ASTM E 1559 : 2009 | Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials |
| ASTM E 2042 : 2004 | Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms |
| ISO 15388:2012 | Space systems — Contamination and cleanliness control |
| ASTM E 1216 : 1999 : R2005 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ASTM E 1559 : 2003 | Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials |
| ASTM F 50 : 2021 | Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles |
| ASTM E 2217 : 2012 | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.