• ASTM E 1644 : 2017

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead

    Available format(s):  Hardcopy, PDF

    Superseded date:  05-11-2021

    Language(s):  English

    Published date:  15-05-2019

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    This practice covers the acid digestion of surface dust samples (collected using wipe sampling practices) and associated quality control (QC) samples for the determination of lead.

    Scope - (Show below) - (Hide below)

    1.1This practice covers the acid digestion of surface dust samples (collected using wipe sampling practices) and associated quality control (QC) samples for the determination of lead.

    1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

    1.2.1Exception—Informational inch-pound units are provided in Note 3.

    1.3This practice contains notes which are explanatory and not part of mandatory requirements of the standard.

    1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    General Product Information - (Show below) - (Hide below)

    Committee D 22
    Document Type Standard Practice
    Product Note THIS STANDARD ALSO REFERS TO EPA SW 846, Method 3050, NIOSH Manual of Analytical Methods
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM E 2115 : 2015 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
    ASTM E 631 : 2015 Standard Terminology of Building Constructions
    ASTM E 1728 : 2016 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
    ASTM E 3193 : 2019 Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS)
    ASTM E 1792 : 2003 : R2016 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
    ASTM E 1583 : 2017 Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
    ASTM E 1775 : 2020 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
    ASTM E 1775 : 2016 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
    ASTM E 1605 : 2018 : REV B Standard Terminology Relating to Lead in Buildings
    ASTM E 2913/E2913M : 2019 Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
    ASTM E 1613 : 2012 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021)
    ASTM E 3203 : 2019 Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)
    ASTM E 1792 : 2020 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
    ASTM E 3193 : 2021 Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS)
    ASTM E 2115 : 2019 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
    ASTM D 8344 : 2020 Standard Practice for Ammonium Bifluoride and Nitric Acid Digestion of Airborne Dust and Dust-Wipe Samples for the Determination of Metals and Metalloids

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM E 1792 : 2003 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
    ASTM E 1792 : 2003 : R2011 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
    ASTM E 1792 : 2001 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
    ASTM E 1792 : 2003 : R2016 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
    ASTM D 1129 : 2003 Standard Terminology Relating to Water
    ASTM D 1129 : 2013 Standard Terminology Relating to Water
    ASTM D 1129 : 2013 : R2020 Standard Terminology Relating to Water
    ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
    ASTM E 1613 : 2012 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021)
    ASTM D 1129 : 2006 Standard Terminology Relating to Water
    ASTM E 1605 : 2001 : REV B Standard Terminology Relating to Lead in Buildings
    ASTM E 1728 : 1999 Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques
    ASTM E 2239 : 2012 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
    ASTM D 1129 : 1999 : REV A Standard Terminology Relating to Water
    ASTM D 1129 : 2006 : REV A Standard Terminology Relating to Water
    ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
    ASTM E 2239 : 2012 : R2016 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
    ASTM E 1605 : 2000 Standard Terminology Relating to Lead in Buildings
    ASTM E 1728 : 2016 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
    ASTM E 1605 : 2018 Standard Terminology Relating to Lead in Buildings
    ASTM D 1129 : 2003 : REV A Standard Terminology Relating to Water
    ASTM D 1129 : 2002 Standard Terminology Relating to Water
    ASTM E 1605 : 2018 : REV A Standard Terminology Relating to Lead in Buildings
    ASTM E 1613 : 1999 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
    ASTM E 1605 : 2001 : REV A Standard Terminology Relating to Lead in Buildings
    ASTM E 1728 : 2002 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
    ASTM E 1792 : 2002 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
    ASTM D 1193 : 1991 Standard Specification for Reagent Water
    ASTM E 2051 : 2001 Standard Practice for the Determination of Lead in Paint, Settled Dust, Soil and Air Particulate by Field-Portable Electroanalysis (Withdrawn 2010)
    ASTM E 1605 : 2003 : EDT 1 Standard Terminology Relating to Lead in Buildings
    ASTM E 1605 : 2019 Standard Terminology Relating to Lead in Buildings
    ASTM E 1728 : 2010 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
    ASTM D 1129 : 2004 Standard Terminology Relating to Water
    ASTM E 1605 : 2003 Standard Terminology Relating to Lead in Buildings
    ASTM E 1613 : 2004 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
    ASTM D 1129 : 2002 : REV A Standard Terminology Relating to Water
    ASTM E 1605 : 2018 : REV B Standard Terminology Relating to Lead in Buildings
    ASTM E 2239 : 2003 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
    ASTM E 1792 : 2001 : EDT 1 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
    ASTM E 1605 : 2004 Standard Terminology Relating to Lead in Buildings
    ASTM D 1193 : 1970 Standard Specification For Reagent Water
    ASTM D 1193 : 2006 Standard Specification for Reagent Water
    ASTM E 2239 : 2004 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
    ASTM D 1193 : 1999 Standard Specification for Reagent Water
    ASTM D 1129 : 2010 Standard Terminology Relating to Water
    ASTM E 1792 : 1996 : REV A Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
    ASTM E 1605 : 2001 Standard Terminology Relating to Lead in Buildings
    ASTM D 1129 : 2006 : REV A : EDT 1 Standard Terminology Relating to Water
    ASTM D 1129 : 2001 Standard Terminology Relating to Water
    ASTM D 1129 : 2004 : EDT 1 Standard Terminology Relating to Water
    ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
    ASTM E 1605 : 2004 : R2012 Standard Terminology Relating to Lead in Buildings
    ASTM E 1605 : 2002 Standard Terminology Relating to Lead in Buildings
    ASTM E 1728 : 2003 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
    ASTM E 2239 : 2002 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective