Skip to content
Please enter a keyword to search

  • ASTM E 1775 : 2016

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead

    Available format(s):  Hardcopy, PDF

    Superseded date:  26-09-2020

    Language(s):  English

    Published date:  01-03-2016

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    This guide provides guidelines for determining the performance of field-portable quantitative lead analysis instruments.

    Scope - (Show below) - (Hide below)

    1.1This guide provides guidelines for determining the performance of field-portable quantitative lead analysis instruments.

    1.2This guide applies to field-portable electroanalytical and spectrophotometric (including reflectance and colorimetric) analyzers.

    1.3Sample matrices of concern herein include paint, dust, soil, and airborne particles.

    1.4This guide addresses the desired performance characteristics of field-based sample extraction procedures for lead, as well as on-site extraction followed by field-portable analysis.

    1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    General Product Information - (Show below) - (Hide below)

    Committee D 22
    Document Type Guide
    Product Note THIS STANDARD ALSO REFERS TO- EPA 600/R-93/200
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM E 631 : 2015 Standard Terminology of Building Constructions
    ASTM E 1979 : 2017 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
    ASTM E 1613 : 2012 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021)

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM E 1792 : 2003 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
    ASTM E 1792 : 2003 : R2011 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
    ASTM E 1792 : 2001 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
    ASTM E 1726 : 2001 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
    ASTM E 1792 : 2003 : R2016 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
    ASTM D 7035 : 2016 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM E 1645 : 2001 : R2007 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
    ASTM D 6966 : 2018 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
    ASTM E 1644 : 2004 : R2012 : EDT 1 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
    ASTM E 1613 : 2012 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021)
    ASTM E 1644 : 2017 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
    ASTM E 1645 : 1994 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
    ASTM D 7144 : 2005 : REV A : R2011 Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
    ASTM D 6785 : 2013 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
    ASTM D 7035 : 2010 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM E 1864 : 1997 Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures
    ASTM D 6785 : 2002 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
    ASTM E 1605 : 2001 : REV B Standard Terminology Relating to Lead in Buildings
    ASTM D 6785 : 2008 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
    ASTM E 1645 : 2016 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
    ASTM E 1645 : 2001 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
    ASTM D 6966 : 2008 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
    ASTM E 1726 : 2001 : R2009 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
    ASTM D 7439 : 2008 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
    ASTM E 1864 : 2002 Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures (Withdrawn 2011)
    ASTM D 5438 : 2000 Standard Practice for Collection of Floor Dust for Chemical Analysis
    ASTM E 1605 : 2000 Standard Terminology Relating to Lead in Buildings
    ASTM E 1605 : 2018 Standard Terminology Relating to Lead in Buildings
    ASTM E 1605 : 2018 : REV A Standard Terminology Relating to Lead in Buildings
    ASTM E 1613 : 1999 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
    ASTM E 1605 : 2001 : REV A Standard Terminology Relating to Lead in Buildings
    ASTM E 1792 : 2002 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
    ASTM E 1605 : 2003 : EDT 1 Standard Terminology Relating to Lead in Buildings
    ASTM D 5438 : 2005 Standard Practice for Collection of Floor Dust for Chemical Analysis
    ASTM E 1605 : 2019 Standard Terminology Relating to Lead in Buildings
    ASTM D 7439 : 2014 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
    ASTM D 6966 : 2003 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
    ASTM D 5438 : 2017 Standard Practice for Collection of Floor Dust for Chemical Analysis
    ASTM E 1605 : 2003 Standard Terminology Relating to Lead in Buildings
    ASTM E 1613 : 2004 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
    ASTM E 1605 : 2018 : REV B Standard Terminology Relating to Lead in Buildings
    ASTM E 1792 : 2001 : EDT 1 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
    ASTM E 1605 : 2004 Standard Terminology Relating to Lead in Buildings
    ASTM E 1644 : 2004 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
    ASTM D 5438 : 2011 Standard Practice for Collection of Floor Dust for Chemical Analysis
    ASTM E 1644 : 1998 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
    ASTM E 1726 : 2016 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
    ASTM E 1792 : 1996 : REV A Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
    ASTM E 1605 : 2001 Standard Terminology Relating to Lead in Buildings
    ASTM E 1726 : 1995 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
    ASTM E 1644 : 2004 : R2016 : EDT 1 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
    ASTM D 7035 : 2004 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM E 1605 : 2004 : R2012 Standard Terminology Relating to Lead in Buildings
    ASTM D 7144 : 2005 Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
    ASTM D 6966 : 2013 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
    ASTM E 1605 : 2002 Standard Terminology Relating to Lead in Buildings
    ASTM D 7144 : 2005 : REV A Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
    ASTM D 7144 : 2005 : REV A : R2016 Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
    ASTM E 1645 : 2001 : R2016 : EDT 1 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective