ASTM E 179 : 2017 : REDLINE
Current
Current
The latest, up-to-date edition.
Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials
Available format(s)
PDF
Language(s)
English
Published date
18-07-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 06.01, 2018 Applies for use in selecting terminology, measurement scales, and instrumentation for describing or evaluating such appearance characteristics as glossiness, opacity, lightness, transparency, and haziness in terms of reflected or transmitted light.
| Committee |
E 12
|
| DocumentType |
Redline
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This guide is intended for use in selecting terminology, measurement scales, and instrumentation for describing or evaluating such appearance characteristics as glossiness, opacity, lightness, transparency, and haziness in terms of reflected or transmitted light. This guide does not consider the spectral variations responsible for color, but the geometric variables described herein can importantly affect instrumentally measured values of color. This guide is general in scope rather than specific as to instrument or material.
1.2This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| I.S. EN ISO 13406-2:2002 | ERGONOMIC REQUIREMENTS FOR WORK WITH VISUAL DISPLAYS BASED ON FLAT PANELS - PART 2: ERGONOMIC REQUIREMENTS FOR FLAT PANEL DISPLAYS |
| ASTM C 1510 : 2001 : R2012 | Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry |
| ASTM E 2545 : 2007 | Standard Test Method for Objective Measurement of Gingival Color Using Digital Still Cameras |
| ASTM E 1651 : 1994 : R2004 | Standard Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry (Withdrawn 2004) |
| ASTM G 73 : 2010 | Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus |
| ASTM E 805 : 2012 : REV A | Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
| ASTM D 4960 : 2008 : R2013 | Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials |
| ASTM E 1331 : 2015 : REDLINE | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM D 5386 : 2016 : REDLINE | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM E 1164 : 2012 : EDT 1 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM E 1651 : 1994 : R1999 | Standard Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry |
| ASTM C 1650 : 2014 : REDLINE | Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated |
| ASTM E 1164 : 2012 : R2017 : EDT 1 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM E 1164 : 2012 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM E 1347 : 2006 : R2011 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM C 1510 :2001 | Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry |
| ASTM E 2630 : 2008 : R2013 | Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source (Withdrawn 2022) |
| ASTM E 284 : 2017 : REDLINE | Standard Terminology of Appearance |
| ASTM E 805 : 2012 : REV A : R2017 | Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
| ASTM E 1347 : 2006 : R2015 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM E 805 :2012 | Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
| ASTM E 1349 : 2006 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45:0 or 0:45) Geometry |
| ASTM E 2545 : 2007 : R2012 | Standard Test Method for Objective Measurement of Gingival Color Using Digital Still Cameras (Withdrawn 2018) |
| ASTM D 2960 : 2005 | Standard Guide for Controlled Laundering Test Using Naturally Soiled Fabrics and Household Appliances (Withdrawn 2013) |
| ASTM E 2630 : 2008 | Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source |
| ASTM E 430 : 2011 : REDLINE | Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry |
| ASTM C 1649 : 2014 : REDLINE | Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated |
| SAE J587_201711 | License Plate Illumination Devices (Rear Registration Plate Illumination Devices) |
| ASTM E 2153 : 2001 : R2011 | Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color |
| ASTM G 73 : 2010 : R2017 | Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus |
| ASTM E 1347 : 2006 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM E 991 : 2016 : REDLINE | Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method |
| ASTM E 2630 : 2008 : EDT 1 | Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source |
| ASTM E 2153 : 2001 : R2006 | Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color |
| ASTM E 2301 : 2012 : R2017 | Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry |
| ASTM D 4960 : 2008 | Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials |
| ASTM E 2301 : 2012 | Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45<span class='unicode'>°</span>:Normal Geometry |
| ASTM C 1510 : 2001 : R2016 | Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry |
| BS EN ISO 13406-2:2002 | Ergonomic requirements for work with visual display based on flat panels Ergonomic requirements for flat panel displays |
| ISO 13406-2:2001 | Ergonomic requirements for work with visual displays based on flat panels Part 2: Ergonomic requirements for flat panel displays |
| EN ISO 13406-2 : 2001 | ERGONOMIC REQUIREMENTS FOR WORK WITH VISUAL DISPLAYS BASED ON FLAT PANELS - PART 2: ERGONOMIC REQUIREMENTS FOR FLAT PANEL DISPLAYS |
| ASTM E 2167 : 2001 | Standard Guide for Selection and Use of Stone Consolidants |
| ASTM E 2153 : 2001 | Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color |
| ASTM C 1510 : 2001 : R2007 | Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry |
| ASTM E 2153 : 2001 : R2017 | Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color |
| TAPPI T 1209 : RP 87 | IDENTIFICATION OF INSTRUMENTAL METHODS OF COLOR OR COLOR DIFFERENCE MEASUREMENT |
| ASTM E 2167 : 2001 : R2008 | Standard Guide for Selection and Use of Stone Consolidants (Withdrawn 2017) |
| ASTM D 5548 : 2013 : REDLINE | Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings) |
| ASTM E 2808 : 2011 | Standard Guide for Microspectrophotometry and Color Measurement in Forensic Paint Analysis |
| ASTM E 1349 : 2006 : R2013 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
| ASTM D 2205 : 2015 : REDLINE | Standard Guide for Selection of Tests for Traffic Paints |
| ASTM D 1455 : 2017 : REDLINE | Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish |
| ASTM E 284 : 2017 : REDLINE | Standard Terminology of Appearance |
| ASTM F 768 : 1982 : R1987 : EDT 1 | Method for Specular Reflectance and Transmittance Measurements of Optically Flat-Coated and Non-Coated Specimens |
| ASTM C 523 : 1968 : R1987 | Method of Test for Light Reflectance of Acoustical Materials by the Integrating Sphere Reflectometer |
| ASTM D 1003 : 2013 : REDLINE | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM E 991 : 2016 : REDLINE | Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method |
| ASTM E 429 : 1978 : R1991 : EDT 1 | Test Method for Measurement and Calculation of Reflecting Characteristics of Metallic Surfaces Using Integrating Sphere Instruments (Withdrawn 1996) |
| ASTM E 430 : 2011 : REDLINE | Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry |
| ASTM D 1746 : 2015 : REDLINE | Standard Test Method for Transparency of Plastic Sheeting |
| ASTM E 1331 : 2015 : REDLINE | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.