ASTM E 2523 : 2013 : R2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology for Metalworking Fluids and Operations
Hardcopy , PDF
13-11-2023
English
04-10-2018
Committee |
E 34
|
DocumentType |
Reference Material
|
Pages |
7
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This terminology standard provides a compilation of ASTM and non-ASTM consensus definitions of terms used in the metalworking industry.
1.2This terminology standard does not purport to be an exhaustive lexicon. Rather, it defines terms relevant to metalworking fluid management and metalworking fluid health and safety.
1.3This terminology standard defines primary metalworking operations, fluid types, and other terms germane to the practice of metalworking fluid management.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 7687 : 2023 | Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration |
ASTM E 1542 : 2021 | Standard Terminology Relating to Occupational Health and Safety |
ASTM E 2564 : 2023 | Standard Practice for Enumeration of <emph type="ital">Mycobacteria</emph> in Metalworking Fluids by Direct Microscopic Counting (DMC) Method |
ASTM E 2563 : 2023 | Standard Practice for Enumeration of Non-Tuberculosis <emph type="ital">Mycobacteria</emph > in Aqueous Metalworking Fluids by Plate Count Method |
ASTM E 1497 : 2023 | Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids |
ASTM E 2889 : 2023 | Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment |
ASTM E 979 : 2020 | Standard Practice for Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids |
ASTM E 3265 : 2021 | Standard Guide for Evaluating Water-Miscible Metalworking Fluid Foaming Tendency |
ASTM E 1302 : 2023 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM E 1302 : 2013 : R2017 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM E 1687 : 2010 : R2014 | Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids |
ASTM E 2889 : 2012 : R2017 | Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment |
ASTM E 979 : 2009 : R2015 | Standard Practice for Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids |
ASTM D 2881 : 2019 | Standard Classification for Metalworking Fluids and Related Materials |
ASTM E 2563 : 2018 | Standard Practice for Enumeration of Non-Tuberculosis <emph type="bdit">Mycobacteria</emph > in Aqueous Metalworking Fluids by Plate Count Method |
ASTM E 1542 : 2018 | Standard Terminology Relating to Occupational Health and Safety |
ASTM E 2148 : 2016 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM E 2275 : 2014 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM E 2694 : 2016 | Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids |
ASTM D 7687 : 2017 | Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration |
ASTM E 1497 : 2023 | Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids |
ASTM E 1972 : 1998 | Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment |
ASTM E 2169 : 2001 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
ASTM E 2275 : 2003 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM D 6161 : 1998 | Standard Terminology Used for Crossflow Microfiltration, Ultrafiltration, Nanofiltration, and Reverse Osmosis Membrane Processes |
ASTM E 2564 : 2018 | Standard Practice for Enumeration of <emph type="bdit">Mycobacteria</emph> in Metalworking Fluids by Direct Microscopic Counting (DMC) Method |
ASTM D 1356 : 2015 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 2144 : 2021 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
ASTM E 1687 : 1998 | Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids |
ASTM E 1497 : 2000 | Standard Practice for Safe Use of Water-Miscible Metal Removal Fluids |
ASTM D 7049 : 2017 | Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres |
ASTM E 2694 : 2009 | Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids |
ASTM E 2563 : 2007 | Standard Test Method for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method |
ASTM E 2275 : 2019 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM E 2564 : 2007 | Standard Test Method for Enumeration of <i>Mycobacteria</i> in Metalworking Fluids by Direct Microscopic Counting (DMC) Method |
ASTM E 2564 : 2023 | Standard Practice for Enumeration of <emph type="ital">Mycobacteria</emph> in Metalworking Fluids by Direct Microscopic Counting (DMC) Method |
ASTM E 2657 : 2016 | Standard Practice for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids |
ASTM E 2148 : 2001 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM E 2144 : 2001 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
ASTM E 2144 : 2011 : R2016 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
ASTM E 1302 : 2023 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM E 2693 : 2009 | Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment |
ASTM D 1356 : 2015 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 2563 : 2023 | Standard Practice for Enumeration of Non-Tuberculosis <emph type="ital">Mycobacteria</emph > in Aqueous Metalworking Fluids by Plate Count Method |
ASTM E 1687 : 2019 | Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids |
ASTM E 1302 : 2000 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM E 1497 : 2017 | Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids |
ASTM E 2693 : 2019 | Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment |
ASTM D 1356 : 2000 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 2657 : 2021 | Standard Practice for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids |
ASTM E 2694 : 2021 | Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids |
ASTM E 2169 : 2022 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
ASTM D 1356 : 2014 : REV B | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 2657 : 2009 | Standard Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids |
ASTM E 2169 : 2017 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
ASTM D 2881 : 1973 : R1983 | Classification of Metal Working Fluids and Related Materials (Withdrawn 1990) |
ASTM D 7049 : 2004 | Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres |
ASTM E 2148 : 2021 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.