ASTM E 2587 : 2016 : R2021 : EDT 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Use of Control Charts in Statistical Process Control
Hardcopy , PDF
01-11-2024
English
15-07-2021
Committee |
E 11
|
DocumentType |
Standard Practice
|
Pages |
29
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice provides guidance for the use of control charts in statistical process control programs, which improve process quality through reducing variation by identifying and eliminating the effect of special causes of variation.
1.2Control charts are used to continually monitor product or process characteristics to determine whether or not a process is in a state of statistical control. When this state is attained, the process characteristic will, at least approximately, vary within certain limits at a given probability.
1.3This practice applies to variables data (characteristics measured on a continuous numerical scale) and to attributes data (characteristics measured as percentages, fractions, or counts of occurrences in a defined interval of time or space).
1.4The system of units for this practice is not specified. Dimensional quantities in the practice are presented only as illustrations of calculation methods. The examples are not binding on products or test methods treated.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 2691 : 2020 | Standard Practice for Job Productivity Measurement |
ASTM E 456 : 2013 : REV A : R2017 : EDT 5 | Standard Terminology Relating to Quality and Statistics |
ASTM E 384 : 2017 | Standard Test Method for Microindentation Hardness of Materials |
ASTM E 2859 : 2011 : R2017 | Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy |
ASTM D 7669 : 2020 | Standard Guide for Practical Lubricant Condition Data Trend Analysis |
ASTM E 2782 : 2017 | Standard Guide for Measurement Systems Analysis (MSA) |
ASTM E 2554 : 2018 : EDT 1 | Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques |
ASTM E 2209 : 2021 | Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry |
ASTM D 7310 : 2020 | Standard Practice for Defect Detection and Rating of Plastic Films Using Optical Sensors |
ASTM E 1323 : 2015 : R2020 | Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data |
ASTM E 1488 : 2012 : R2018 | Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
ASTM E 177 : 2020 | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
ASTM D 7310 : 2021 | Standard Practice for Defect Detection and Rating of Plastic Films Using Optical Sensors |
ASTM E 3372 : 2023 | Standard Guide for Schedule Performance Index, Schedule Beta (β<inf>s</inf >) |
ASTM E 3353 : 2022 | Standard Guide for In-Process Monitoring Using Optical and Thermal Methods for Laser Powder Bed Fusion |
ASTM E 384 : 2022 | Standard Test Method for Microindentation Hardness of Materials |
ASTM E 2209 : 2022 | Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry |
ASTM E 2859 : 2011 : R2023 | Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy |
ASTM E 1488 : 2023 | Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
ASTM E 2782 : 2017 : R2022 : EDT 1 | Standard Guide for Measurement Systems Analysis (MSA) |
ASTM E 3239 : 2021 | Standard Guide for Using Statistical Process Control Principles for Routine Dosimetry in Radiation Processing |
ASTM E 2554 : 2018 : R2024 : EDT 1 | Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques |
ASTM E 3418 : 2023 : EDT 1 | Standard Practice for Calculating Scientifically Justifiable Limits of Residues for Cleaning of Pharmaceutical and Medical Device Manufacturing Equipment and for Medical Devices |
ASTM E 456 : 2013 : REV A : R2022 | Standard Terminology Relating to Quality and Statistics |
ASTM E 456 : 2013 : REV A : R2022 : EDT 1 | Standard Terminology Relating to Quality and Statistics |
ASTM E 1994 : 2009 : R2023 | Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans |
ASTM E 1994 : 2009 : R2018 | Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans |
ASTM E 2234 : 2009 : R2018 | Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL |
ASTM E 2234 : 2009 : R2023 | Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL |
ASTM E 456 : 2013 : REV A : R2017 : EDT 6 | Standard Terminology Relating to Quality and Statistics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.