ASTM E 2935 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Conducting Equivalence Testing in Laboratory Applications
Hardcopy , PDF
13-08-2020
English
01-11-2017
This practice provides statistical methodology for conducting equivalence testing on numerical data from two sources to determine if their true means or variances differ by no more than predetermined limits.
Committee |
E 11
|
DocumentType |
Standard Practice
|
Pages |
23
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice provides statistical methodology for conducting equivalence testing on numerical data from two sources to determine if their true means or variances differ by no more than predetermined limits.
1.2Applications include (1) equivalence testing for bias against an accepted reference value, (2) determining means equivalence of two test methods, test apparatus, instruments, reagent sources, or operators within a laboratory or equivalence of two laboratories in a method transfer, and (3) determining non-inferiority of a modified test procedure versus a current test procedure with respect to a performance characteristic.
1.3The guidance in this standard applies to experiments conducted on a single material at a given level of the test result or on multiple materials covering a range of selected test results.
1.4Guidance is given for determining the amount of data required for an equivalence trial. The control of risks associated with the equivalence decision is discussed.
1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 2842 : 2019 | Standard Test Method for Water Absorption of Rigid Cellular Plastics |
ASTM D 6980 : 2017 | Standard Test Method for Determination of Moisture in Plastics by Loss in Weight |
ASTM D 6290 : 2019 | Standard Test Method for Color Determination of Plastic Pellets |
ASTM D 2584 : 2018 | Standard Test Method for Ignition Loss of Cured Reinforced Resins |
ASTM D 2863 : 2017 : REV A | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
ASTM D 4883 : 2018 | Standard Test Method for Density of Polyethylene by the Ultrasound Technique |
ASTM D 1505 : 2018 | Standard Test Method for Density of Plastics by the Density-Gradient Technique |
ASTM D 5225 : 2017 | Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer |
ASTM D 4603 : 2018 | Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer |
ASTM D 635 : 2018 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
ASTM D 3012 : 2019 | Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven |
ASTM D 3591 : 2017 | Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds |
ASTM D 1494 : 2017 | Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels |
ASTM D 7148 : 2019 | Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System |
ASTM D 5492 : 2017 | Standard Test Method for Determination of Xylene Solubles in Propylene Plastics |
ASTM D 1601 : 2018 | Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers |
ASTM D 882 : 2018 | Standard Test Method for Tensile Properties of Thin Plastic Sheeting |
ASTM D 6109 : 2019 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products |
ASTM D 6108 : 2019 | Standard Test Method for Compressive Properties of Plastic Lumber and Shapes |
ASTM D 1525 : 2017 : EDT 1 | Standard Test Method for Vicat Softening Temperature of Plastics |
ASTM D 3895 : 2019 | Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry |
ASTM D 5155 : 2019 | Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates |
ASTM D 4659 : 2019 | Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates |
ASTM D 2863 : 2019 | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
ASTM D 4226 : 2019 | Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products |
ASTM D 7148 : 2019 : REV A | Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System |
ASTM D 2843 : 2019 | Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics |
ASTM D 3014 : 2019 : REV A | Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position |
ASTM D 4812 : 2019 | Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics |
ASTM D 4877 : 2019 | Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates |
ASTM E 2586 : 2012 | Standard Practice for Calculating and Using Basic Statistics |
ASTM E 3080 : 2017 | Standard Practice for Regression Analysis |
ASTM E 2586 : 2014 | Standard Practice for Calculating and Using Basic Statistics |
ASTM E 3080 : 2016 | Standard Practice for Regression Analysis |
ASTM E 2586 : 2010 : REV A | Standard Practice for Calculating and Using Basic Statistics |
ASTM E 2282 : 2013 | Standard Guide for Defining the Test Result of a Test Method |
ASTM E 2586 : 2019 | Standard Practice for Calculating and Using Basic Statistics |
ASTM E 2586 : 2012 : REV A | Standard Practice for Calculating and Using Basic Statistics |
ASTM E 3080 : 2019 | Standard Practice for Regression Analysis with a Single Predictor Variable |
ASTM E 2282 : 2003 | Standard Guide for Defining the Test Result of a Test Method |
ASTM E 2586 : 2007 | Standard Practice for Calculating and Using Basic Statistics |
ASTM E 2282 : 2014 : R2019 | Standard Guide for Defining the Test Result of a Test Method |
ASTM E 2586 : 2016 | Standard Practice for Calculating and Using Basic Statistics |
ASTM E 2586 : 2019 : EDT 1 | Standard Practice for Calculating and Using Basic Statistics |
ASTM E 2586 : 2018 | Standard Practice for Calculating and Using Basic Statistics |
ASTM E 2586 : 2012 : REV B | Standard Practice for Calculating and Using Basic Statistics |
ASTM E 2282 : 2014 | Standard Guide for Defining the Test Result of a Test Method |
ASTM E 2586 : 2010 | Standard Practice for Calculating and Using Basic Statistics |
ASTM E 2282 : 2009 | Standard Guide for Defining the Test Result of a Test Method |
ASTM E 2586 : 2013 | Standard Practice for Calculating and Using Basic Statistics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.