Skip to content
Please enter a keyword to search

  • ASTM D 3895 : 2019

    Current The latest, up-to-date edition.

    Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  24-06-2019

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    This test method outlines a procedure for the determination of oxidative-induction time (OIT) of polymeric materials by differential scanning calorimetry (DSC).

    Scope - (Show below) - (Hide below)

    1.1This test method outlines a procedure for the determination of oxidative-induction time (OIT) of polymeric materials by differential scanning calorimetry (DSC). It is applicable to polyolefin resins that are in a fully stabilized/compounded form.

    1.2The values stated in SI units are to be regarded as the standard.

    1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards information is given in Section 8.

    Note 1:This standard and ISO 11357–6 2013 address the same subject matter, but differ in technical content.

    1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    General Product Information - (Show below) - (Hide below)

    Committee D 20
    Document Type Test Method
    Publisher American Society for Testing and Materials
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 5747/D5747M : 2008 : R2013 : EDT 1 Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
    ASTM F 3346 : 2019 Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PERT/AL/PE-RT) Composite Pressure Pipe
    ASTM D 4000 : 2016 Standard Classification System for Specifying Plastic Materials
    ASTM D 5885/D5885M : 2017 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
    ASTM F 2788/F2788M : 2019 Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe
    ASTM F 2623 : 2019 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
    ASTM E 2046 : 2014 Standard Test Method for Reaction Induction Time by Thermal Analysis
    ASTM F 3123 : 2018 : REV A Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)
    ASTM D 4732 : 2013 Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable
    ASTM F 2986 : 2012 : R2017 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications
    ASTM F 2389 : 2017 : REV A Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
    ASTM F 3219 : 2019 Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings
    ASTM D 4731 : 2013 Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
    ASTM D 6389 : 2017 Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids
    ASTM F 2769 : 2018 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
    ASTM F 2881/F2881M : 2019 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
    ASTM F 2306/F2306M : 2019 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
    ASTM F 2764/F2764M : 2019 Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
    ASTM E 1858 : 2008 : R2015 : EDT 1 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
    ASTM E 2009 : 2008 : R2014 : EDT 1 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
    ASTM F 2929 : 2017 Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
    ASTM F 3378/F3378M : 2022 Standard Specification for Crosslinkable Polyethylene (CX-PE) Pipe
    ASTM F 2788/F2788M : 2021 Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe
    ASTM F 3506 : 2021 : EDT 1 Standard Specification for Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PE-RT/AL/PE-RT) Composite Pressure Pipe based on Inner Diameter (ID) for use in Air Conditioning and Refrigeration Line Set Systems
    ASTM F 2306/F2306M : 2021 Standard Specification for 300 mm to 1500 mm [12 in. to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Non-Pressure Gravity-Flow Storm Sewer and Subsurface Drainage Applications
    ASTM D 4732 : 2013 : R2020 Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable
    ASTM D 4731 : 2013 : R2020 Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
    ASTM D 8269 : 2021 Standard Guide for the Use of Geocells in Geotechnical and Roadway Projects
    ASTM F 2389 : 2023 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
    ASTM D 5885/D5885M : 2020 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
    ASTM F 2986 : 2012 : R2023 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications
    ASTM D 4000 : 2023 Standard Classification System for Specifying Plastic Materials
    ASTM F 2947/F2947M : 2021 : REV A Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
    ASTM E 2046 : 2019 Standard Test Method for Reaction Induction Time by Thermal Analysis
    ASTM D 5747/D5747M : 2021 Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
    ASTM F 2881/F2881M : 2021 : EDT 1 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
    ASTM D 6388 : 2018 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
    ASTM F 2929 : 2017 : R2021 Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
    ASTM F 2769 : 2023 : REV A Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
    ASTM F 3336 : 2022 Standard Practice for Lipid Preconditioning of Ultra-High-Molecular-Weight Polyethylene for Accelerated Aging
    ASTM E 2070 : 2013 : R2018 Standard Test Methods for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
    ASTM F 2720/F2720M : 2020 Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe
    ASTM F 3123 : 2022 Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)
    ASTM E 2009 : 2023 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
    ASTM F 876 : 2023 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
    ASTM E 1858 : 2023 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
    ASTM F 2764/F2764M : 2023 Standard Specification for 6 in. to 60 in. [150 mm to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
    ASTM F 2987 : 2012 : R2018 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications (Withdrawn 2024)
    ASTM E 1860 : 2023 Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
    ASTM F 2623 : 2022 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM E 473 : 2022 : REV D Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM D 4703 : 2002 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
    ASTM E 473 : 2022 Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM E 473 : 2021 Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM D 4703 : 2003 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
    ASTM E 2935 : 2017 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
    ASTM E 2935 : 2014 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
    ASTM E 473 : 2022 : REV B Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM E 473 : 2018 Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM E 691 : 2020 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM E 2935 : 2013 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
    ASTM D 4703 : 1993 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
    ASTM E 473 : 2023 : REV A Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM E 691 : 2019 : EDT 1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM E 473 : 2022 : REV C Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM E 691 : 2023 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM D 4703 : 2010 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
    ASTM E 2935 : 2020 Standard Practice for Conducting Equivalence Tests for Comparing Testing Processes
    ASTM E 691 : 2022 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM E 691 : 2009 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM E 2935 : 2020 : EDT 1 Standard Practice for Conducting Equivalence Tests for Comparing Testing Processes
    ASTM E 691 : 2021 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM E 2935 : 2016 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
    ASTM E 473 : 2021 : REV A Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM E 473 : 2023 : REV B Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM D 4703 : 2000 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
    ASTM E 473 : 2022 : REV A Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM E 2935 : 2021 Standard Practice for Evaluating Equivalence of Two Testing Processes
    ASTM E 473 : 2023 Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM D 4703 : 2010 : REV A Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
    ASTM D 4703 : 2016 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
    ASTM E 2935 : 2015 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
    ASTM D 4703 : 2007 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective