![header thumbnail](/images/publishers\astm_cover.gif)
ASTM E 3008/E3008M : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Classification for Transportation Surface Elements—UNIFORMAT II
Hardcopy , PDF
01-06-2023
English
01-06-2016
CONTAINED IN VOL. 04.12, 2016 Defines a classification of transportation surface elements within the UNIFORMAT 2 family of elemental classifications.
Committee |
E 06
|
DocumentType |
Standard
|
Pages |
11
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1This standard establishes a classification of transportation surface elements within the UNIFORMAT II family of elemental classifications. It covers the full breadth of vehicular transportation surfaces, from rural roads to multi-lane interstate highways.
1.2UNIFORMAT II classifications have an elemental format similar to the original UNIFORMAT2 building elemental classification. However, the title UNIFORMAT II differs from the original in that it now takes into consideration a wide range of constructed entities that collectively form the built environment.
1.3Elements, as defined here and in Classifications E1557 and E2103/E2103M, are major physical components that are common within constructed entities. Elements perform their given function(s), regardless of the design specification, construction method, or materials used.
1.4This elemental classification serves as a consistent reference for analysis, evaluation, and monitoring during the feasibility, planning, and design stages when constructing transportation surfaces.
1.5Using UNIFORMAT II elemental classifications ensures a consistency in the economic evaluation of construction projects over time and from project to project.
1.6UNIFORMAT II classifications also enhance reporting at all stages of a constructed entity’s life cycle—from feasibility and planning through the preparation of working documents, construction, maintenance, rehabilitation, and disposal.
1.7This classification is unsuitable for process applications or for preparing trade estimates.
1.8The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.9This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM E 1121 : 2012 | Standard Practice for Measuring Payback for Investments in Buildings and Building Systems |
ASTM E 2691 : 2009 | Standard Practice for Job Productivity Measurement |
ASTM E 2514 : 2008 | Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses |
ASTM E 2103/E2103M : 2013-06 | CLASSIFICATION FOR BRIDGE ELEMENTS - UNIFORMAT 2 |
ASTM E 631 : 2015 : REDLINE | Standard Terminology of Building Constructions |
ASTM E 2691 : 2016 : REDLINE | Standard Practice for Job Productivity Measurement |
ASTM E 1057 : 2015 : REDLINE | Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems |
ASTM E 1557 : 2005 | Standard Classification for Building Elements and Related Sitework-UNIFORMAT II |
ASTM E 1804 : 2016 | Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project |
ASTM E 2691 : 2020 | Standard Practice for Job Productivity Measurement |
ASTM E 964 : 2015 : REDLINE | Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems |
ASTM E 2516 : 2011 | Standard Classification for Cost Estimate Classification System |
ASTM E 1369 : 2011 | Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems |
ASTM E 1699 : 2000 : R2005 | Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems |
ASTM E 1699 : 2010 | Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems and Other Constructed Projects <a href="#fn00002"></a> |
ASTM E 1369 : 2007 : EDT 2 | Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems |
ASTM E 1185 : 1993 : R1998 : EDT 1 | Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems |
ASTM E 1369 : 2002 | Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems |
ASTM E 2083 : 2005 : R2016 | Standard Classification for Building Construction Field Requirements, and Office Overhead & Profit |
ASTM E 2013 : 2006 | Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study |
ASTM E 1369 : 2007 | Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems |
ASTM E 2516 : 2011 : REDLINE | Standard Classification for Cost Estimate Classification System |
ASTM E 2013 : 2012 | Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study |
ASTM E 1699 : 2000 | Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems |
ASTM E 1185 : 2015 : REDLINE | Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems |
ASTM E 833 : 2014 : REDLINE | Standard Terminology of Building Economics |
ASTM E 1946 : 2018 | Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects |
ASTM E 2083 : 2000 | Standard Classification for Building Construction Field Requirements, and Office Overhead & Profit |
ASTM E 1185 : 2007 | Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems |
ASTM E 1121 : 2002 | Standard Practice for Measuring Payback for Investments in Buildings and Building Systems |
ASTM E 2691 : 2011 | Standard Practice for Job Productivity Measurement |
ASTM E 1369 : 2015 : REDLINE | Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems |
ASTM E 1557 : 1997 : EDT 1 | Standard Classification for Building Elements and Related Sitework-UNIFORMAT II |
ASTM E 1074 : 2015 | Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems |
ASTM E 1804 : 2007 | Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project |
ASTM E 1557 : 2002 | Standard Classification for Building Elements and Related Sitework-UNIFORMAT II |
ASTM E 1946 : 1998 | Standard Practice for Measuring Cost Risk of Buildings and Building Systems |
ASTM E 2506 : 2011 | Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities |
ASTM E 1804 : 2012 | Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project |
ASTM E 1057 : 2006 : EDT 1 | Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems |
ASTM E 2168 : 2001 | Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating |
ASTM E 2514 : 2015 | Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses |
ASTM E 2168 : 2010 : R2016 | Standard Classification for Allowance, Contingency, and Reserve Sums in Building Construction Estimating |
ASTM E 1121 : 2007 : EDT 1 | Standard Practice for Measuring Payback for Investments in Buildings and Building Systems |
ASTM E 1074 : 2015 : REDLINE | Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems |
ASTM E 1369 : 2007 : EDT 1 | Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems |
ASTM E 2691 : 2016 | Standard Practice for Job Productivity Measurement |
ASTM E 1557 : 2009 : R2015 | Standard Classification for Building Elements and Related Sitework—UNIFORMAT II |
ASTM E 2168 : 2006 | Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating |
ASTM E 1369 : 2015 | Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems |
ASTM E 2506 : 2006 | Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities |
ASTM E 2516 : 2006 | Standard Classification for Cost Estimate Classification System |
ASTM E 2083 : 2005 : R2010 | Standard Classification for Building Construction Field Requirements, and Office Overhead Profit |
ASTM E 2013 : 2012 : REDLINE | Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study |
ASTM E 1699 : 2014 : REDLINE | Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes |
ASTM E 1946 : 2002 | Standard Practice for Measuring Cost Risk of Buildings and Building Systems |
ASTM E 2506 : 2015 : REDLINE | Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities |
ASTM E 2506 : 2006 : EDT 1 | Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities |
ASTM E 1074 : 2009 | Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems |
ASTM E 1057 : 2004 | Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems |
ASTM E 917 : 2015-10 | PRACTICE FOR MEASURING LIFE-CYCLE COSTS OF BUILDINGS AND BUILDING SYSTEMS |
ASTM E 1946 : 2007 | Standard Practice for Measuring Cost Risk of Buildings and Building Systems |
ASTM E 2083 : 2005 | Standard Classification for Building Construction Field Requirements, and Office Overhead Profit |
ASTM E 1804 : 1996 | Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project |
ASTM E 1804 : 2016 : REDLINE | Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project |
ASTM E 1057 : 1999 | Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems |
ASTM E 2514 : 2015 : REDLINE | Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses |
ASTM E 1185 : 2012 | Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems |
ASTM E 2168 : 2010 | Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating |
ASTM E 1057 : 2015 | Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems |
ASTM E 2506 : 2015 | Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities |
ASTM E 1121 : 2015 | Standard Practice for Measuring Payback for Investments in Buildings and Building Systems |
ASTM E 1074 : 2004 | Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems |
ASTM E 1121 : 2015 : REDLINE | Standard Practice for Measuring Payback for Investments in Buildings and Building Systems |
ASTM E 2013 : 1999 | Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study |
ASTM E 1804 : 2002 | Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project |
ASTM E 1121 : 1998 | Standard Practice for Measuring Payback for Investments in Buildings and Building Systems |
ASTM E 2516 : 2011 : R2019 | Standard Classification for Cost Estimate Classification System |
ASTM E 1074 : 1993 : R1998 : EDT 1 | Standard Practice for Measuring Net Benefits for Investments in Buildings and Building Systems |
ASTM E 1057 : 2006 | Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems |
ASTM E 1699 : 2014 | Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes |
ASTM E 1557 : 2001 | Standard Classification for Building Elements and Related Sitework-UNIFORMAT II |
ASTM E 1185 : 2007 : EDT 1 | Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems |
ASTM E 2514 : 2006 | Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses |
ASTM E 1074 : 2006 | Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems |
ASTM E 1057 : 2006 : R2010 | Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems |
ASTM E 1185 : 2015 | Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems |
ASTM E 1185 : 2002 | Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems |
ASTM E 1369 : 1998 | Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems |
ASTM E 1699 : 2013 | Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes |
ASTM E 1557 : 2009 | Standard Classification for Building Elements and Related Sitework-UNIFORMAT II |
ASTM E 1946 : 2012 | Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.