• ASTM E 631 : 2015 : REDLINE

    Current The latest, up-to-date edition.

    Standard Terminology of Building Constructions

    Available format(s):  PDF

    Language(s):  English

    Published date:  01-03-2015

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 04.11, 2015 Defines the terms and definitions pertaining to the field of buildings, and in particular, terms related to the standards generated by ASTM Committee E 06 on Performance of Buildings.

    Scope - (Show below) - (Hide below)

    1.1This Terminology consists of terms and definitions pertaining to the subject field of buildings and building construction, and in particular, terms related to the standards generated by ASTM Committee E06 on Performance of Buildings.

    1.2The purpose of this Terminology is to provide preferred and admitted designations along with the meanings and explanations of technical concepts applied in the subject field of buildings and construction, written for both the non-expert and the expert user.

    1.3This comprehensive Terminology standard contains all ASTM standardized definitions generated in ASTM Committee E06 that are considered general in nature. Beyond this comprehensive terminology, there are also separate terminology standards that have been developed within Committee E06 by a number of technical subcommittees.

    1.3.1These separate general terminologies are created relative to specific subject fields and the terminological entries have been grouped for convenient use (see Section 2 and Appendix X1). Some terminology data contained in those other subsidiary terminology standards also appear in this comprehensive standard.

    1.3.2The following standards are separate terminologies that have been developed within specific E06 Subcommittees whose term entry lists are provided in Appendix X1:

    E833

    Terminology of Building Economics

    E1480

    Terminology of Facility Management (Building-Related)

    E1481

    Terminology of Railing Systems and Rails for Buildings

    E1605

    Terminology Relating to Lead in Buildings

    E1749

    Terminology Relating to Rigid Wall Relocatable Shelters

    E2110

    Terminology for Exterior Insulation and Finish Systems (EIFS)

    E2151

    Terminology of Guides for Specifying and Evaluating Performance
       of Single Family Attached and Detached Dwellings

    E2265

    Terminology for Anchors and Fasteners in Concrete and Masonry

    1.4Terms are listed in alphabetical sequence. Compound terms appear in the natural spoken order. To show the relationships in certain families of concepts, groups of narrower terms and their definitions are grouped under the definition of the broader term. Each such sub-entry is listed also (in italics) with a cross-reference to the special class.

    1.5Certain standard definitions herein are adopted from other sources. Each is an exact copy. The source is identified at the right margin following the definition, and is listed in Section 2.

    General Product Information - (Show below) - (Hide below)

    Committee E 06
    Development Note Supersedes ASTM E 540. (03/2002)
    Document Type Redline
    Publisher American Society for Testing and Materials
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM E 196 : 2006 : R2012 Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
    ASTM E 283 : 2004 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
    ASTM E 1748 : 1995 Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
    ASTM E 2178 : 2013 : REDLINE Standard Test Method for Air Permeance of Building Materials
    ASTM E 3036 : 2015 Standard Guide for Notating Facade Conditions in the Field
    ASTM E 998 : 2012 : REDLINE Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
    ASTM E 564 : 2006 Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
    ASTM E 1666 : 1995 : REV A : R1999 Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
    ASTM C 1564 : 2015 : REDLINE Standard Guide for Use of Silicone Sealants for Protective Glazing Systems
    ASTM F 2078 : 2015 : REDLINE Standard Terminology Relating to Hydrogen Embrittlement Testing
    ASTM D 6630/D6630M : 2016 : REDLINE Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance
    ASTM E 970 : 2017 : REDLINE Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
    ASTM E 605/E605M : 1993 : R2015 : EDT 1 Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
    ASTM E 2068 : 2000 : R2016 Standard Test Method for Determination of Operating Force of Sliding Windows and Doors
    ASTM E 661 : 2003 : R2015 : EDT 1 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
    ASTM E 1258 : 1988 : R2012 Standard Test Method for Airflow Calibration of Fan Pressurization Devices
    ASTM E 2817 : 2011 : R2018 Standard Test Method for Test Fueling Masonry Heaters
    ASTM D 4099 : 1995 Standard Specification for Poly(Vinyl Choride)(PVC) Prime Windows and Sliding Glass Doors (Withdrawn 1999)
    ASTM E 2485 : 2006 Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings
    ASTM E 605 : 1993 : R2000 Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
    ASTM E 2268 : 2004 : R2011 Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference
    ASTM E 2392/E2392M : 2010 Standard Guide for Design of Earthen Wall Building Systems
    ASTM E 1666 : 1995 : REV A : R2012 Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
    ASTM E 741 : 2011 : R2017 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
    ASTM E 1693 : 1995 : R1999 Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets
    ASTM E 1664 : 1995 : REV A : R2005 Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
    ASTM C 1715/C1715M : 2015 : REDLINE Standard Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems
    ASTM E 1836/E1836M : 2009 : R2016 Standard Practice for Building Floor Area Measurements for Facility Management
    ASTM E 2635 : 2014 : REDLINE Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation
    ASTM E 1646 : 1995 : R2003 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
    ASTM E 2395 : 2006 Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact.
    ASTM D 7445 : 2018 : REDLINE Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)
    ASTM E 1694 : 1995 : REV A : R2018 Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
    ASTM E 2558 : 2013 : REDLINE Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces
    ASTM E 2052 : 1999 Standard Guide for Evaluation, Management, and Control of Lead Hazards in Facilities (Withdrawn 2008)
    ASTM E 767 : 1996 : R2001 Standard Test Method for Shear Strength Properties of Metal Connector Plates (Withdrawn 2005)
    ASTM E 1668 : 1995 : REV A : R2012 Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
    ASTM E 1121 : 2015 : REDLINE Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
    ASTM E 2359 : 2006 Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly
    ASTM E 331 : 2000 : R2009 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
    ASTM E 2134 : 2001 : R2006 Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
    ASTM E 605 : 1993 : R2011 Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
    ASTM E 1368 : 2014 : REDLINE Standard Practice for Visual Inspection of Asbestos Abatement Projects
    ASTM E 741 : 2011 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
    ASTM E 1857 : 1997 : R2004 Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces
    ASTM E 987 : 1988 : R2001 Standard Test Methods for Deglazing Force of Fenestration Products
    ASTM E 2271 : 2005 : REV A : R2012 : EDT 1 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and in Other Child-Occupied Facilities
    ASTM E 1668 : 1995 : REV A : R1999 Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
    ASTM E 2319 : 2004 Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
    ASTM E 2068 : 2000 : R2008 Standard Test Method for Determination of Operating Force of Sliding Windows and Doors
    ASTM E 575 : 2005 : R2011 Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
    ASTM E 1424 : 1991 : R2016 Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
    ASTM E 2099 : 2000 : R2007 Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
    ASTM C 1735 : 2017 : REDLINE Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
    ASTM E 1668 : 1995 : REV A : R2018 Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
    ASTM E 1692 : 1995 : REV A : R1999 Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
    ASTM E 1665 : 1995 : REV A : R1999 Standard Classification for Serviceability of an Office Facility for Facility Protection
    ASTM E 2112 : 2007 : R2016 Standard Practice for Installation of Exterior Windows, Doors and Skylights
    ASTM E 529 : 2004 : R2011 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
    ASTM E 2556/E2556M : 2010 : R2016 Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
    ASTM E 1258 : 1988 : R1998 Standard Test Method for Airflow Calibration of Fan Pressurization Devices
    ASTM E 2271 : 2005 : REV A Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities
    ASTM E 241 : 2009 Standard Guide for Limiting Water-Induced Damage to Buildings
    ASTM E 2392/E2392M : 2010 : R2016 Standard Guide for Design of Earthen Wall Building Systems
    ASTM D 4756 : 2015 : REDLINE Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit
    ASTM C 1788 : 2014 Standard Specification for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications
    ASTM E 547 : 2000 : R2016 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
    ASTM E 2127 : 2001 : REV A : R2015 : EDT 1 Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
    ASTM E 405 : 2004 : R2018 Standard Test Methods for Wear Testing Rotary Operators for Windows
    ASTM E 1971 : 2005 : R2011 Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings
    ASTM E 1425 : 2014 : REDLINE Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems
    ASTM E 937 : 1993 : R2011 Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
    ASTM D 1356 : 2017 : REDLINE Standard Terminology Relating to Sampling and Analysis of Atmospheres
    ASTM E 447 : 1997 Test Methods for Compressive Strength of Laboratory Constructed Masonry Prisms (Withdrawn 1998)
    ASTM E 1556 : 2012 : REDLINE Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
    ASTM E 894 : 1988 : R2004 Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
    ASTM E 2260 : 2003 : R2012 Standard Guide for Repointing (Tuckpointing) Historic Masonry
    ASTM E 1185 : 2015 : REDLINE Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
    ASTM E 1800 : 2013 : REDLINE Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels
    ASTM E 2269 : 2014 : REDLINE Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
    ASTM E 547 : 2000 : R2009 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
    ASTM E 405 : 2004 : R2012 Standard Test Methods for Wear Testing Rotary Operators for Windows
    ASTM E 2954 : 2015 Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members
    ASTM E 1669 : 1995 : REV A : R1999 Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
    ASTM C 1764 : 2012 : R2016 Standard Test Methods for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications
    ASTM E 1424 : 1991 : R2008 Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
    ASTM E 1612 : 1994 : R2005 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
    ASTM E 1996 : 2017 : REDLINE Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
    ASTM E 1399/E1399M : 1997 : R2013 : EDT 1 Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
    ASTM E 2786 : 2010 : R2015 Standard Test Methods for Measuring Expansion of Intumescent Materials Used in Firestop and Joint Systems
    ASTM E 1514 : 1998 : R2011 Standard Specification for Structural Standing Seam Steel Roof Panel Systems
    ASTM E 1481 : 2000 : REV A Standard Terminology of Railing Systems and Rails for Buildings
    ASTM E 2516 : 2011 : REDLINE Standard Classification for Cost Estimate Classification System
    ASTM E 1074 : 2015 : REDLINE Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
    ASTM D 8052/D8052M : 2017 Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies
    ASTM E 1605 : 2004 : R2012 Standard Terminology Relating to Lead in Buildings
    ASTM E 2260 : 2003 Standard Guide for Repointing (Tuckpointing) Historic Masonry
    ASTM E 1993 : 1998 : R2008 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
    ASTM E 1701 : 1995 : R2018 Standard Classification for Serviceability of an Office Facility for Manageability
    ASTM E 1692 : 1995 : REV A : R2018 Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
    ASTM E 2336 : 2016 : REDLINE Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
    ASTM E 1667 : 1995 : REV A : R2005 Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants
    ASTM E 964 : 2015 : REDLINE Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
    ASTM E 1555 : 2012 : REDLINE Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
    ASTM E 1783 : 1996 : R2005 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
    ASTM E 330 : 2002 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
    ASTM E 1664 : 1995 : REV A : R1999 Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
    ASTM E 546 : 2014 : REDLINE Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
    ASTM E 2168 : 2010 : R2016 Standard Classification for Allowance, Contingency, and Reserve Sums in Building Construction Estimating
    ASTM F 842 : 2017 : REDLINE Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
    ASTM E 196 : 2006 Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
    ASTM E 2127 : 2001 : REV A : R2006 Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
    ASTM E 767 : 1996 Standard Test Method for Shear Strength Properties of Metal Connector Plates
    ASTM E 894 : 1988 : R1998 Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
    ASTM E 2140 : 2001 Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head
    ASTM E 241 : 2009 : R2014 : EDT 1 Standard Guide for Limiting Water-Induced Damage to Buildings
    ASTM E 1513 : 1993 : R2000 Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
    ASTM E 2358 : 2017 : REDLINE Standard Specification for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades
    ASTM E 73 : 2013 : REDLINE Standard Practice for Static Load Testing of Truss Assemblies
    ASTM E 1057 : 2015 : REDLINE Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
    ASTM E 2271 : 2005 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities
    ASTM E 1857 : 1997 : R2013 : EDT 1 Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces
    ASTM E 936 : 1998 Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing
    ASTM E 1258 : 1988 : R2008 Standard Test Method for Airflow Calibration of Fan Pressurization Devices
    ASTM E 2957 : 2017 : REDLINE Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections
    ASTM E 2260 : 2003 : R2012 : EDT 1 Standard Guide for Repointing (Tuckpointing) Historic Masonry
    ASTM E 1692 : 1995 : REV A : R2012 Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
    ASTM E 2925 : 2017 : REDLINE Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function
    ASTM E 1637 : 1998 : R2003 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
    ASTM E 3119 : 2017 : EDT 1 Standard Test Method for Accelerated Aging of Environmentally Controlled Dynamic Glazing
    ASTM E 2168 : 2010 Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating
    ASTM E 2461 : 2012 : R2017 Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs
    ASTM E 1646 : 1995 : R2018 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
    ASTM E 2322 : 2003 : R2009 Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
    ASTM E 1801 : 2015 : REDLINE Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
    ASTM E 1464 : 1992 : R2005 Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities (Withdrawn 2014)
    ASTM E 2461 : 2012 Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs
    ASTM E 2013 : 2012 : REDLINE Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
    ASTM E 2619 : 2008 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
    ASTM E 1605 : 2004 Standard Terminology Relating to Lead in Buildings
    ASTM E 2637 : 2017 : REDLINE Standard Guide for Utilizing the Environmental Cost Element Structure Presented by Classification
    ASTM E 1670 : 1995 : REV A : R2005 Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
    ASTM E 2779 : 2010 : R2017 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
    ASTM D 5319 : 2017 : REDLINE Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels
    ASTM E 1583 : 2017 Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
    ASTM E 2032 : 2009 : R2017 Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
    ASTM E 661 : 2003 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
    ASTM E 1612/E1612M : 1994 : R2017 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
    ASTM E 835/E835M : 1993 : R2002 Standard Guide for Modular Coordination of Clay and Concrete Masonry Units (Withdrawn 2011)
    ASTM E 1424 : 1991 : R2000 Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
    ASTM E 1677 : 2011 : REDLINE SPECIFICATION FOR AIR BARRIER (AB) MATERIAL OR SYSTEM FOR LOW-RISE FRAMED BUILDING WALLS
    ASTM E 2270 : 2014 : REDLINE Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions
    ASTM E 2400 : 2006 Standard Guide for Selection, Installation, and Maintenance of Plants for Green Roof Systems
    ASTM E 2268 : 2004 : R2016 Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference
    ASTM E 2691 : 2016 : REDLINE Standard Practice for Job Productivity Measurement
    ASTM E 2140 : 2001 : R2009 Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head
    ASTM E 1481 : 2000 : REV A : R2008 Standard Terminology of Railing Systems and Rails for Buildings
    ASTM E 1300 : 2016 : REDLINE Standard Practice for Determining Load Resistance of Glass in Buildings
    ASTM E 1334 : 1995 : R2005 Standard Practice for Rating the Serviceability of a Building or Building-Related Facility
    ASTM E 1233/E1233M : 2014 : REDLINE Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
    ASTM E 2127 : 2001 : REV A : R2007 Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
    ASTM E 2112 : 2007 Standard Practice for Installation of Exterior Windows, Doors and Skylights
    ASTM E 2570/E2570M : 2007 : R2019 Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage
    ASTM E 1670 : 1995 : REV A : R2018 Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
    ASTM E 1664 : 1995 : REV A : R2018 Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
    ASTM E 1637 : 1998 : R2017 : EDT 1 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
    ASTM E 695 : 2003 : R2015 : EDT 1 Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
    ASTM E 2484 : 2008 : R2015 Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices (Withdrawn 2024)
    ASTM E 1514 : 1998 Standard Specification for Structural Standing Seam Steel Roof Panel Systems
    ASTM E 1514 : 1998 : R2003 Standard Specification for Structural Standing Seam Steel Roof Panel Systems
    ASTM E 1669 : 1995 : REV A : R2012 Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
    ASTM F 3038 : 2014 Standard Test Method for Timed Evaluation of Forced-Entry-Resistant Systems
    ASTM E 1258 : 1988 : R2003 Standard Test Method for Airflow Calibration of Fan Pressurization Devices
    ASTM E 936 : 1998 : R2004 Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing (Withdrawn 2012)
    ASTM E 1667 : 1995 : REV A : R2012 Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants
    ASTM E 2649 : 2012 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
    ASTM C 1787 : 2014 Standard Specification for Installation of Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications
    ASTM E 1662 : 1995 : REV A : R1999 Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment
    ASTM E 2322 :2003 Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
    ASTM E 2432 : 2017 : REDLINE GUIDE FOR GENERAL PRINCIPLES OF SUSTAINABILITY RELATIVE TO BUILDINGS
    ASTM E 3087 : 2017 Standard Test Method for Measuring Capture Efficiency of Domestic Range Hoods
    ASTM F 3057 : 2016 : REDLINE Standard Test Method for Electromagnetic Shielding Effectiveness of Glazings
    ASTM E 1662 : 1995 : REV A : R2018 Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment
    ASTM E 2484 : 2008 Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices
    ASTM E 1670 : 1995 : REV A : R2012 Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
    ASTM E 2844 : 2015 : EDT 1 Standard Specification for Demonstrating That a Building’s Location Provides Access to Public Transit
    ASTM E 1637 : 1998 : R2011 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
    ASTM E 990 : 2013 : REDLINE Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels
    ASTM E 1637 : 1998 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
    ASTM E 2321 : 2003 Standard Practice for Use of Test Methods E 96 for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)
    ASTM E 3037 : 2016 Standard Test Method for Measuring Relative Movement Capabilities of Through-Penetration Firestop Systems
    ASTM E 2323 : 2004 Standard Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements From an Oxygen Analyzer (Withdrawn 2012)
    ASTM E 1662 : 1995 : REV A : R2012 Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment
    ASTM E 1694 : 1995 : REV A : R2012 Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
    ASTM E 2841 : 2011 Standard Guide for Conducting Inspections of Building Facades for Unsafe Conditions
    ASTM E 2785 : 2014 : REDLINE Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions
    ASTM E 331 : 2000 : R2016 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
    ASTM E 405 : 2004 Standard Test Methods for Wear Testing Rotary Operators for Windows
    ASTM E 1423 : 2014 : REDLINE Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
    ASTM E 2268 : 2004 Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference
    ASTM E 1803 : 2014 : REDLINE Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels
    ASTM E 1669 : 1995 : REV A : R2005 Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
    ASTM E 3026 : 2015 Standard Guide for Readily Observable Moisture Affected Materials and Conditions Conducive to Elevated Moisture in Commercial Buildings: Visual Moisture Assessment Process
    ASTM E 2099 : 2000 : R2014 : EDT 1 Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
    02/104966 DC : 0 ISO/DIS 12055 - BUILDING CONSTRUCTION - GUARDRAIL SYSTEMS AND RAILS FOR BUILDINGS
    ASTM E 1748 : 1995 : R2001 Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
    ASTM E 1666 : 1995 : REV A : R2018 Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
    ASTM E 1646 : 1995 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
    ASTM E 1826 : 2012 : REDLINE Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
    ASTM E 1671 : 1995 : REV A : R2012 Standard Classification for Serviceability of an Office Facility for Cleanliness
    ASTM E 3130 : 2018 Standard Guide for Developing Cost-Effective Community Resilience Strategies
    ASTM E 2570 : 2007 Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage
    ASTM F 2912 : 2017 : REDLINE Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings
    ASTM E 1857 : 1997 Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces
    ASTM E 3121/E3121M : 2017 Standard Test Methods for Field Testing of Anchors in Concrete or Masonry
    ASTM E 1851 : 2015 : REDLINE Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures
    ASTM E 2103/E2103M : 2013-06 CLASSIFICATION FOR BRIDGE ELEMENTS - UNIFORMAT 2
    ASTM E 835/E835M : 1993 : R1999 Standard Guide for Modular Coordination of Clay and Concrete Masonry Units
    ASTM E 2266 : 2011 : REDLINE Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
    ASTM E 1765 : 2016 : REDLINE Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes
    ASTM E 1399 : 1997 : R2009 Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
    ASTM C 1199 : 2014 : REDLINE Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
    ASTM E 2843 : 2017 : REDLINE Standard Specification for Demonstrating That a Building is in Walkable Proximity to Neighborhood Assets
    ASTM E 1971 : 2005 Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings
    ASTM E 2514 : 2015 : REDLINE Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses
    ASTM E 1804 : 2016 : REDLINE Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
    ASTM E 1480 : 1992 : R2004 Standard Terminology of Facility Management (Building-Related)
    ASTM E 695 : 2003 Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
    ASTM D 7254 : 2017 : REDLINE Standard Specification for Polypropylene (PP) Siding
    ASTM E 1694 : 1995 : REV A : R2005 Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
    ASTM C 1795 : 2017 : REDLINE Standard Test Methods for High-Temperature Characterization of Gypsum Boards and Panels
    ASTM E 1701 : 1995 : R2005 Standard Classification for Serviceability of an Office Facility for Manageability
    ASTM C 1815 : 2017 Standard Practice for Periodically Measuring and Monitoring Sealant Dimensions to Stability Following a Period of Compression or Tension
    ASTM E 1612/E1612M : 1994 : R2013 : EDT 1 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
    ASTM E 1748 : 1995 : R2009 Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
    ASTM E 1399 : 1997 : R2005 Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
    ASTM E 331 : 2000 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
    ASTM E 575 : 2005 Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
    ASTM E 2342/E2342M : 2010 : R2015 : EDT 1 Standard Test Method for Durability Testing of Duct Sealants
    ASTM E 547 : 2000 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
    ASTM E 1827 : 2011 : R2017 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
    ASTM E 3008/E3008M : 2016 Standard Classification for Transportation Surface Elements—UNIFORMAT II
    ASTM E 987 : 1988 : R2017 Standard Test Methods for Deglazing Force of Fenestration Products
    ASTM E 917 : 2015-10 PRACTICE FOR MEASURING LIFE-CYCLE COSTS OF BUILDINGS AND BUILDING SYSTEMS
    ASTM E 1671 : 1995 : REV A : R2005 Standard Classification for Serviceability of an Office Facility for Cleanliness
    ASTM E 1665 : 1995 : REV A : R2005 Standard Classification for Serviceability of an Office Facility for Facility Protection
    ASTM D 3841 : 2016 : REDLINE Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
    ASTM E 2322 : 2003 : R2015 Standard Test Method for Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
    ASTM E 154/E154M : 2008 : REV A : R2013 : EDT 1 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
    ASTM E 2032 : 2009 : R2013 Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
    ASTM E 1993/E1993M : 1998 : R2013 : EDT 1 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
    ASTM E 2556/E2556M : 2010 Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
    ASTM E 330/E330M : 2014 : REDLINE Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
    ASTM E 1730 : 2015 : REDLINE SPECIFICATION FOR RIGID FOAM FOR USE IN STRUCTURAL SANDWICH PANEL CORES
    ASTM E 1480 : 1992 : R2013 Standard Terminology of Facility Management (Building-Related)
    ASTM E 1783 : 1996 : R2009 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
    ASTM E 1233 : 2006 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
    ASTM E 330 : 2002 : R2010 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
    ASTM E 2969 : 2017 Standard Test Methods for Transverse Load Tests on Panels Used in Wall Construction
    ASTM E 2392 : 2005 Standard Guide for Design of Earthen Wall Building Systems
    ASTM E 1612 : 1994 : R2000 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
    ASTM E 1513 : 1993 : R2005 : EDT 1 Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
    ASTM E 2114 : 2017-03 TERMINOLOGY FOR SUSTAINABILITY RELATIVE TO THE PERFORMANCE OF BUILDINGS
    ASTM C 1851 : 2018 Standard Practice for Determining the Extent of Cracking in a Sealant using the Difference between the Compressive and Tensile Modulus
    ASTM E 987 : 1988 : R1994 : EDT 1 Standard Test Methods for Deglazing Force of Fenestration Products
    ASTM D 4973 : 1993 Specification for White Rigid Poly(Vinyl Chloride)(PVC) Insulating Storm Windows (Withdrawn 1999)
    ASTM E 2264 : 2005 : R2013 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
    ASTM E 2506 : 2015 : REDLINE Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities
    ISO 20492-1:2008 Glass in buildings - Insulating glass — Part 1: Durability of edge seals by climate tests
    ASTM E 3069 : 2017 Standard Guide for Evaluation and Rehabilitation of Mass Masonry Walls for Changes to Thermal and Moisture Properties of the Wall
    ASTM E 3038 : 2016 Standard Practice for Assessing and Qualifying Candidates as Inspectors of Firestop Systems and Fire-Resistive Joint Systems
    ASTM E 2780 : 2010 : R2017 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters
    ASTM E 2813 : 2012 Standard Practice for Building Enclosure Commissioning
    ASTM E 1661 : 1995 : REV A : R2012 Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
    ASTM E 3053 : 2017 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
    ASTM E 1410 : 1991 : R2005 Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings (Withdrawn 2014)
    ASTM E 2074 : 2000 Standard Test Method for Fire Tests of Door Assemblies, Including Positive Pressure Testing of Side-Hinged and Pivoted Swinging Door Assemblies
    ASTM E 2393: 2010 Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
    ASTM E 2912 : 2017 : REDLINE Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction
    ASTM E 2780 : 2010 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters
    ASTM E 1660 : 1995 : REV A : R2018 Standard Classification for Serviceability of an Office Facility for Support for Office Work
    ASTM E 2813 : 2012 : EDT 1 Standard Practice for Building Enclosure Commissioning
    ASTM E 2393 : 2010 : REV A Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
    ASTM E 2393 : 2010 : REV A : R2015 Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
    ASTM E 2837 : 2013 : R2017 Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies
    ASTM E 3054/E3054M : 2016 Standard Guide for Characterization and Use of Hygrothermal Models for Moisture Control Design in Building Envelopes
    ASTM E 2074 : 2000 : EDT 1 Standard Test Method for Fire Tests of Door Assemblies, Including Positive Pressure Testing of Side-Hinged and Pivoted Swinging Door Assemblies (Withdrawn 2007)
    ASTM E 1661 : 1995 : REV A : R2018 Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
    ASTM E 2010 : 2001 Standard Test Method for Positive Pressure Fire Tests of Window Assemblies (Withdrawn 2007)
    ASTM E 1661 : 1995 : REV A : R1999 Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
    ASTM E 1660 : 1995 : REV A : R1999 Standard Classification for Serviceability of an Office Facility for Support for Office Work
    ASTM E 1660 : 1995 : REV A : R2012 Standard Classification for Serviceability of an Office Facility for Support for Office Work
    ASTM E 2837 : 2013 Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies
    ASTM E 1661 : 1995 : REV A : R2005 Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
    ASTM E 1509 : 2012 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
    ASTM E 1660 : 1995 : REV A : R2005 Standard Classification for Serviceability of an Office Facility for Support for Office Work
    ASTM E 1509 : 2012 : R2017 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
    ASTM E 1410 : 1991 : R1997 : EDT 1 Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings
    ASTM E 3119 : 2017 Standard Test Method for Accelerated Aging of Environmentally Controlled Dynamic Glazing
    ASTM E 783 : 2002 Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
    ASTM E 564 : 2006 : R2012 Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
    ASTM E 2353 : 2016 : REDLINE Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades
    ASTM E 937 : 1993 : R2000 Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
    ASTM E 283 : 2004 : R2012 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
    ASTM E 2431 : 2012 : REDLINE Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings
    ASTM E 2134 : 2001 Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
    ASTM E 1680 : 2016 : REDLINE Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems
    ASTM E 576 : 2014 : REDLINE Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
    ASTM E 2620 : 2015 : REDLINE Standard Classification for Program and Project Estimate Summaries
    CSA A123.21 : 2014 STANDARD TEST METHOD FOR THE DYNAMIC WIND UPLIFT RESISTANCE OF MEMBRANE-ROOFING SYSTEMS
    ASTM E 1612 : 1994 : R2009 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
    ASTM E 1825 : 2017 : REDLINE Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
    ASTM E 529 : 2004 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
    ASTM E 2141 : 2014 : REDLINE Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units
    ASTM E 2127 : 2001 : REV A Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
    ASTM E 1993 : 1998 : R2002 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
    ASTM E 605 : 1993 : R2006 Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
    ASTM E 2204 : 2015 : REDLINE Standard Guide for Summarizing the Economic Impacts of Building-Related Projects
    ASTM E 1369 : 2015 : REDLINE Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
    ASTM E 1334 : 1995 : R1999 Standard Practice for Rating the Serviceability of a Building or Building-Related Facility
    ASTM E 3090/E3090M : 2017 Standard Test Methods for Strength Properties of Metal Ceiling Suspension Systems
    ASTM E 865 : 2012 : REDLINE Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
    ASTM E 1679 : 2013 : REDLINE Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed
    ASTM E 2395 : 2006 : R2013 Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact
    ASTM E 2032 : 2009 Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
    ASTM E 2140 : 2001 : R2017 Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head
    ASTM E 2513 : 2007 : R2012 Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems
    ASTM E 1701 : 1995 : R1999 Standard Classification for Serviceability of an Office Facility for Manageability
    ASTM E 1783/E1783M : 1996 : R2017 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
    ASTM E 1693 : 1995 : R2018 Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets
    ASTM E 2786 : 2010 Standard Test Methods for Measuring Expansion of Intumescent Materials Used in Firestop and Joint Systems
    ASTM E 2779 : 2010 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
    ASTM E 1480 : 1992 : R1998 : EDT 1 Standard Terminology of Facility Management (Building-Related)
    ASTM E 1991 : 2005 Standard Guide for Environmental Life Cycle Assessment (LCA) of Building Materials/Products (Withdrawn 2014)
    ASTM E 2150 : 2017 : REDLINE Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure
    ASTM E 1665 : 1995 : REV A : R2012 Standard Classification for Serviceability of an Office Facility for Facility Protection
    ASTM E 2953 : 2014 Standard Specification for Evaluating Accelerated Aging Performance of Electrochromic Devices in Sealed Insulating Glass Units
    ASTM D 3679 : 2017 : REDLINE Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
    ASTM E 894 : 1988 : R2010 Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
    ASTM F 588 : 2017 : REDLINE Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
    ASTM E 2068 : 2000 Standard Test Method for Determination of Operating Force of Sliding Windows and Doors
    ASTM E 661 : 2003 : R2009 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
    ASTM E 987 : 1988 : R2009 Standard Test Methods for Deglazing Force of Fenestration Products
    ASTM E 1946 : 2012 Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects
    ASTM E 1794 : 2013 : REDLINE Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels
    ASTM E 2319 : 2004 : R2011 Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
    ASTM E 1671 : 1995 : REV A : R1999 Standard Classification for Serviceability of an Office Facility for Cleanliness
    ASTM D 4477 : 2016 : REDLINE Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
    ASTM E 3074/E3074M : 2016 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single Family Dwellings, in Individual Units of Multifamily Dwellings, and in Other Child-Occupied Facilities
    ASTM E 1667 : 1995 : REV A : R2018 Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants
    ASTM E 1669 : 1995 : REV A : R2018 Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
    ASTM E 937/E937M : 1993 : R2015 : EDT 1 Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
    ASTM E 2099 : 2000 Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
    ASTM E 1748 : 1995 : R2017 Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
    ASTM E 1665 : 1995 : REV A : R2018 Standard Classification for Serviceability of an Office Facility for Facility Protection
    ASTM E 1399/E1399M : 1997 : R2017 Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
    ASTM E 1464 : 1992 : R1999 Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities
    ASTM E 1836/E1836M : 2009 : EDT 1 Standard Practice for Building Floor Area Measurements for Facility Management
    ASTM D 3678 : 2014 : REDLINE Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
    ASTM E 1481 : 2000 : REV A : R2014 : EDT 1 Standard Terminology of Railing Systems and Rails for Buildings
    ASTM E 2513 : 2007 Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems
    ASTM E 2320 : 2004 : R2018 Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
    ASTM E 2320 : 2004 : R2012 Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
    ASTM E 2320 : 2004 Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
    ASTM E 2136 : 2004 : R2013 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability (Withdrawn 2022)
    ASTM E 2351 : 2004 : REV A : R2013 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Functionality (Withdrawn 2022)
    ASTM E 2136 : 2004 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability
    ASTM E 2351 : 2004 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Functionality
    ASTM E 2351 : 2004 : REV A Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Functionality
    ASTM E 2267 : 2004 : R2013 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality (Withdrawn 2022)
    ASTM E 2267 : 2004 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Indoor Air Quality
    ASTM E 2924 : 2014 Standard Practice for Intumescent Coatings
    ASTM D 5206 : 2013 : REDLINE Standard Test Method for Windload Resistance of Rigid Plastic Siding
    ASTM E 1700 : 2016 : REDLINE Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope
    ASTM E 2750 : 2017 : REDLINE Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM E814
    ASTM E 1662 : 1995 : REV A : R2005 Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment
    ASTM E 1663 : 2003 Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology
    ASTM E 695 : 2003 : R2009 Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
    ASTM E 997 : 2015 : REDLINE Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing
    ASTM E 1091 : 2013 : REDLINE Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels
    ASTM E 1979 : 2017 : REDLINE Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
    ASTM E 937 : 1993 : R2005 Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
    ASTM E 2156 : 2004 : R2013 Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings (Withdrawn 2022)
    ASTM E 2128 : 2017 : REDLINE Standard Guide for Evaluating Water Leakage of Building Walls
    ASTM E 1513 : 1993 : R2011 Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
    ASTM E 2400/E2400M : 2006 : R2015 : EDT 1 Standard Guide for Selection, Installation, and Maintenance of Plants for Green Roof Systems
    ASTM E 1692 : 1995 : REV A : R2005 Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
    ASTM E 1693 : 1995 : R2012 Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets
    ASTM E 1514 : 1998 : R2017 : EDT 1 Standard Specification for Structural Standing Seam Steel Roof Panel Systems
    ASTM C 1401 : 2014 : REDLINE Standard Guide for Structural Sealant Glazing
    ASTM E 1827 : 2011 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
    ASTM E 2778 : 2014 Standard Specification for Custom Tiled/Mortared Masonry Heaters (Stoves)
    ASHRAE 119 : 1988(RA 2004) AIR LEAKAGE PERFORMANCE FOR DETACHED SINGLE-FAMILY RESIDENTIAL BUILDINGS
    ASTM D 7586/D7586M : 2011 Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies (Withdrawn 2020)
    ASTM E 2115 : 2015 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
    ASTM E 1646 : 1995 : R2011 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
    ASTM C 1764 : 2012 Standard Test Methods for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications
    ASTM E 1699 : 2014 : REDLINE Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes
    ASTM E 1105 : 2015 : REDLINE Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
    ASTM E 2156 : 2004 Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings
    ASTM E 1668 : 1995 : REV A : R2005 Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
    ASTM E 1993 : 1998 : R2002 : EDT 1 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
    ASTM E 1513/E1513M : 1993 : R2015 : EDT 1 Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
    ASTM E 1664 : 1995 : REV A : R2012 Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
    ASTM F 3006 : 2013 Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing
    ASTM E 2392/E2392M : 2010 : EDT 1 Standard Guide for Design of Earthen Wall Building Systems
    ASTM E 1667 : 1995 : REV A : R1999 Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants
    ASTM E 2777 : 2014 Standard Guide for Vegetative (Green) Roof Systems
    ASTM E 2817 : 2011 Standard Test Method for Test Fueling Masonry Heaters
    ASTM E 2844 : 2015 Standard Specification for Demonstrating That a Building’s Location Provides Access to Public Transit
    ASTM E 1694 : 1995 : REV A : R1999 Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
    ASTM E 1663 : 2003 : R2010 Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology
    ASTM E 1671 : 1995 : REV A : R2018 Standard Classification for Serviceability of an Office Facility for Cleanliness
    ASTM E 1993 : 1998 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
    ASTM E 2511 : 2017 : REDLINE Standard Guide for Detailing of EIFS-Clad Barrier and Drainage Wall Assemblies
    ASTM E 1693 : 1995 : R2005 Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets
    ASTM D 7186 : 2014 : REDLINE Standard Practice for Quality Assurance Observation of Roof Construction and Repair
    ASTM E 1186 : 2017 : REDLINE Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
    ASTM E 1080 : 1985 Practice for Static Load Testing of Wood-Framed Truss Assemblies (Withdrawn 1995)
    ASTM E 1701 : 1995 : R2012 Standard Classification for Serviceability of an Office Facility for Manageability
    ASTM E 489 : 1992 : R1997 Standard Test Method for Tensile Strength Properties of Metal Connector Plates (Withdrawn 2005)
    ASTM E 2126 : 2011-07 TEST METHODS FOR CYCLIC (REVERSED) LOAD TEST FOR SHEAR RESISTANCE OF VERTICAL ELEMENTS OF THE LATERAL FORCE RESISTING SYSTEMS FOR BUILDINGS
    ASTM E 1670 : 1995 : REV A : R1999 Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
    ASTM E 2264 :2005 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
    ASTM E 1783/E1783M : 1996 : R2013 : EDT 1 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
    ASTM E 3120 : 2017 Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings
    ASTM E 2121 : 2013 : REDLINE Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
    ASTM E 2816 : 2018 : REDLINE Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
    ASTM E 1399 : 1997 : R2000 Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
    ASTM E 1666 : 1995 : REV A : R2005 Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
    ASTM E 1334 : 1995 : R2012 Standard Practice for Rating the Serviceability of a Building or Building-Related Facility (Withdrawn 2013)
    ASTM E 1745 : 2017 : REDLINE Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
    ASTM E 2166 : 2016 : REDLINE Standard Practice for Organizing and Managing Building Data
    ASTM E 1783 : 1996 : R2000 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
    ASTM D 7338 : 2014 : REDLINE Standard Guide for Assessment Of Fungal Growth in Buildings
    ASTM E 864 : 2012 : REDLINE Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
    ASTM C 1589/C1589M : 2018 : REDLINE Standard Practice for Outdoor Weathering of Construction Seals and Sealants
    ASTM E 2127 : 2001 Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
    ASTM D 779 : 2016 Standard Test Method for Determining the Water Vapor Resistance of Sheet Materials in Contact with Liquid Water by the Dry Indicator Method
    ASTM E 2619/E2619M : 2017 : REDLINE Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM E 621 : 1994 : R1999 : EDT 1 Standard Practice for the Use of Metric (SI) Units in Building Design and Construction (Committee E-6 Supplement to E380) (Withdrawn 2008)
    ASTM E 1677 : 2011 : REDLINE SPECIFICATION FOR AIR BARRIER (AB) MATERIAL OR SYSTEM FOR LOW-RISE FRAMED BUILDING WALLS
    ASTM E 96/E96M : 2016 : REDLINE Standard Test Methods for Water Vapor Transmission of Materials
    ASTM E 1613 : 2012 : REDLINE Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
    ASTM E 1645 : 2016 : REDLINE Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
    ASTM E 546 : 2014 : REDLINE Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
    ASTM E 774 : 1997 Standard Specification for the Classification of the Durability of Sealed Insulating Glass Units (Withdrawn 2006)
    ASTM E 1553 : 1993 Standard Practice for Collection of Airborne Particulate Lead During Abatement and Construction Activities (Withdrawn 2002)
    ASTM E 998 : 2012 : REDLINE Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
    ASTM E 1644 : 2017 : REDLINE Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
    ASTM E 1729 : 2016 Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
    ASTM E 1726 : 2016 : REDLINE Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
    ASTM E 1775 : 2016 : REDLINE Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
    ASTM E 73 : 2013 : REDLINE Standard Practice for Static Load Testing of Truss Assemblies
    ASTM E 1728 : 2016 : REDLINE Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
    ASTM E 1828 : 2001 Standard Practice for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint (Withdrawn 2010)
    ASTM E 1186 : 2017 : REDLINE Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
    ASTM E 1423 : 2014 : REDLINE Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
    ASTM E 997 : 2015 : REDLINE Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing
    ASTM E 1679 : 2013 : REDLINE Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed
    ASTM E 1727 : 2016 Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
    ASTM C 168 : 2017-06 TERMINOLOGY RELATING TO THERMAL INSULATION
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective